2,337 research outputs found

    Electrically conductive electrospun polymeric mats for sensing dispersed vegetable oil impurities inwastewater

    Get PDF
    This paper addresses the preparation of electrically conductive electrospun mats on a base of styrene-isoprene-styrene copolymer (SIS) and multiwall carbon nanotubes (CNTs) and their application as active sensing elements for the detection of vegetable oil impurities dispersed within water. The most uniform mats without beads were prepared using tetrahydrofuran (THF)/ dimethyl formamide (DMF) 80:20 (v/v) as the solvent and 13 wt. % of SIS. The CNT content was 10 wt. %, which had the most pronounced changes in electrical resistivity upon sorption of the oil component. The sensors were prepared by deposition of the SIS/CNT layer onto gold electrodes through electrospinning and applied for sensing of oil dispersed in water for 50, 100, and 1000 ppm. - 2019 by the authors.This publication was supported by the Qatar University Collaborative Grant QUCG-CAM-19/20-2. The findings achieved herein are solely the responsibility of the authors. The publication of this article was funded by the Qatar National Library.Scopu

    The Reasons for Discontinuation of Infliximab Treatment in Patients with Crohn's Disease: A Review of Practice at NHS Teaching Hospital

    Get PDF
    Introduction. There is little information on the reasons for discontinuing infliximab treatment in patients with Crohn's disease. The aim of this study was to document these reasons to determine if any were preventable which would allow patients to continue the therapy. Aims & Methods. A review of the medical notes was conducted at the Norfolk and Norwich University Hospital on patients with Crohn's disease treated with infliximab between 2002–2008 to determine the reasons for stopping it. Results. A total of 65 patients were identified who had treatment with infliximab, of whom 23 (35.3%) had their therapy stopped. The reasons for discontinuation of infliximab in the 23 patients were: 47.8% side effects, 17.4% refractory disease, 13.0% achieved remission and did not receive long-term maintenance treatment, 4.34% pregnancy, 4.34% death, and unknown 13.0%. Conclusions. The main reasons for the discontinuation of infliximab were side effects rather than a lack of clinical response

    Facile preparation of N-S co-doped graphene quantum dots (GQDs) from graphite waste for efficient humidity sensing

    Get PDF
    In this work, graphene quantum dots (GQDs) were prepared from Graphitic waste. The resulting GQDs were evaluated for the potential application for resistive humidity sensors. The resistive humidity sensors were fabricated on the pre-patterned interdigital ITO electrodes using the three different concentrations (2.5, 5.0, and 10 mg) of GQDs in DMF. The GQDs films were deposited using the spin coating technique. The GQDs (10 mg/ml) based impedance sensors showed good sensitivity and lowered hysteresis as compared to the other ratios (2.5 and 5 mg) of the GQDs. The maximum calculated hysteresis of the GQDs (10 mg) based humidity sensor is around 2.2 % at 30%RH, and the minimum calculated hysteresis of the GQDs (10 mg/ml) based humidity sensor is approximately 0.79 % at 60 %RH. The response and recovery time found to be 15 s and 55 s, respectively. The interesting humidity-dependent resistive properties of these prepared GQDs make them promising for potential application in humidity sensing.Scopu

    Polymorphisms in RAD51, XRCC2 and XRCC3 genes of the homologous recombination repair in colorectal cancer—a case control study

    Get PDF
    XRCC2 and XRCC3 proteins are structurally and functionally related to RAD51 which play an important role in the homologous recombination, the process frequently involved in cancer transformation. In our previous work we show that the 135G>C polymorphism (rs1801320) of the RAD51 gene can modify the effect of the Thr241Met polymorphism (rs861539) of the XRCC3 gene. We tested the association between the 135G>C polymorphism of the RAD51 gene, the Thr241Met polymorphism of the XRCC3 gene and the Arg188His polymorphism (rs3218536) of the XRCC2 gene and colorectal cancer risk and clinicopathological parameters. Polymorphisms were evaluated by restriction fragment length polymorphism polymerase chain reaction (RFLP-PCR) in 100 patients with invasive adenocarcinoma of the colon and in 100 sex, age and ethnicity matched cancer–free controls. We stratified the patients by genotypes, tumour Duke’s and TNM stage and calculated the linkage of each genotype with each stratum. Carriers of Arg188Arg/Me241tMet, His188His/Thr241Thr and His188His/G135G genotypes had an increased risk of colorectal cancer occurrence (OR 5.70, 95% CI 1.10–29.5; OR 12.4, 95% CI 1.63–94.9; OR 5.88, 95% CI 1.21–28.5, respectively). The C135C genotype decreased the risk of colorectal cancer singly (OR 0.06, 95% CI 0.02–0.22) as well as in combination with other two polymorphisms. TNM and Duke’s staging were not related to any of these polymorphisms. Our results suggest that the 135G>C polymorphism of the RAD51 gene can be an independent marker of colorectal cancer risk. The Thr241Met polymorphism of the XRCC3 gene and the Arg188His polymorphism of the XRCC2 gene can modify the risk of colorectal cancer

    Evaluation of annealed titanium oxide nanotubes on titanium: From surface characterization to in vivo assays

    Get PDF
    The entire route from anodic oxidation and surface characterization, including in vitro experiments and finally in vivo osseointegration assays were performed with the aim to evaluate nanotubular and crystalline annealed titanium oxides as a suitable surface for grade 2 titanium permanent implants. Polished titanium (T0) was compared with anodized surfaces obtained in acidic media with fluoride, leading to an ordered nanotubular structure of titanium oxide on the metal surface, characterized by tube diameter of 89 ± 24 nm (Tnts). Samples were thermally treated in air (TntsTT) to increase the anatase crystalline phase on nanotubes, with minor alteration of the structure. Corrosion tests were performed to evaluate the electrochemical response after 1, 14, and 28 days of immersion in simulated body fluid. Based on the in vitro results, heat-treated titanium nanotubes (TntsTT) were selected as a promissory candidate to continue with the osseointegration in vivo assays. The in vivo results showed no major improvement in the osseointegration process when compared with untreated Ti after 30 days of implantation and there also was a lower increase in the development of new osseous tissue.Fil: Gomez Sanchez, Andrea Valeria. Universidad Tecnológica Nacional; ArgentinaFil: Katunar, María R.. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; ArgentinaFil: Pastore, Juan Ignacio. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones Científicas y Tecnológicas en Electrónica. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones Científicas y Tecnológicas en Electrónica; ArgentinaFil: Tano de la Hoz, María Florencia. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; ArgentinaFil: Ceré, Silvia. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; Argentin

    Urinary MicroRNA Profiling in the Nephropathy of Type 1 Diabetes

    Get PDF
    Background: Patients with Type 1 Diabetes (T1D) are particularly vulnerable to development of Diabetic nephropathy (DN) leading to End Stage Renal Disease. Hence a better understanding of the factors affecting kidney disease progression in T1D is urgently needed. In recent years microRNAs have emerged as important post-transcriptional regulators of gene expression in many different health conditions. We hypothesized that urinary microRNA profile of patients will differ in the different stages of diabetic renal disease. Methods and Findings: We studied urine microRNA profiles with qPCR in 40 T1D with >20 year follow up 10 who never developed renal disease (N) matched against 10 patients who went on to develop overt nephropathy (DN), 10 patients with intermittent microalbuminuria (IMA) matched against 10 patients with persistent (PMA) microalbuminuria. A Bayesian procedure was used to normalize and convert raw signals to expression ratios. We applied formal statistical techniques to translate fold changes to profiles of microRNA targets which were then used to make inferences about biological pathways in the Gene Ontology and REACTOME structured vocabularies. A total of 27 microRNAs were found to be present at significantly different levels in different stages of untreated nephropathy. These microRNAs mapped to overlapping pathways pertaining to growth factor signaling and renal fibrosis known to be targeted in diabetic kidney disease. Conclusions: Urinary microRNA profiles differ across the different stages of diabetic nephropathy. Previous work using experimental, clinical chemistry or biopsy samples has demonstrated differential expression of many of these microRNAs in a variety of chronic renal conditions and diabetes. Combining expression ratios of microRNAs with formal inferences about their predicted mRNA targets and associated biological pathways may yield useful markers for early diagnosis and risk stratification of DN in T1D by inferring the alteration of renal molecular processes. © 2013 Argyropoulos et al

    ECFA Detector R&D Panel, Review Report

    Full text link
    Two special calorimeters are foreseen for the instrumentation of the very forward region of an ILC or CLIC detector; a luminometer (LumiCal) designed to measure the rate of low angle Bhabha scattering events with a precision better than 103^{-3} at the ILC and 102^{-2} at CLIC, and a low polar-angle calorimeter (BeamCal). The latter will be hit by a large amount of beamstrahlung remnants. The intensity and the spatial shape of these depositions will provide a fast luminosity estimate, as well as determination of beam parameters. The sensors of this calorimeter must be radiation-hard. Both devices will improve the e.m. hermeticity of the detector in the search for new particles. Finely segmented and very compact electromagnetic calorimeters will match these requirements. Due to the high occupancy, fast front-end electronics will be needed. Monte Carlo studies were performed to investigate the impact of beam-beam interactions and physics background processes on the luminosity measurement, and of beamstrahlung on the performance of BeamCal, as well as to optimise the design of both calorimeters. Dedicated sensors, front-end and ADC ASICs have been designed for the ILC and prototypes are available. Prototypes of sensor planes fully assembled with readout electronics have been studied in electron beams.Comment: 61 pages, 51 figure

    Combined QCD and electroweak analysis of HERA data

    Full text link
    A simultaneous fit of parton distribution functions (PDFs) and electroweak parameters to HERA data on deep inelastic scattering is presented. The input data are the neutral current and charged current inclusive cross sections which were previously used in the QCD analysis leading to the HERAPDF2.0 PDFs. In addition, the polarisation of the electron beam was taken into account for the ZEUS data recorded between 2004 and 2007. Results on the vector and axial-vector couplings of the Z boson to u- and d-type quarks, on the value of the electroweak mixing angle and the mass of the W boson are presented. The values obtained for the electroweak parameters are in agreement with Standard Model predictions.Comment: 32 pages, 10 figures, accepted by Phys. Rev. D. Small corrections from proofing process and small change to Fig. 12 and Table

    Limits on the effective quark radius from inclusive epep scattering at HERA

    Get PDF
    The high-precision HERA data allows searches up to TeV scales for Beyond the Standard Model contributions to electron-quark scattering. Combined measurements of the inclusive deep inelastic cross sections in neutral and charged current epep scattering corresponding to a luminosity of around 1 fb1^{-1} have been used in this analysis. A new approach to the beyond the Standard Model analysis of the inclusive epep data is presented; simultaneous fits of parton distribution functions together with contributions of "new physics" processes were performed. Results are presented considering a finite radius of quarks within the quark form-factor model. The resulting 95% C.L. upper limit on the effective quark radius is 0.4310160.43\cdot 10^{-16} cm.Comment: 10 pages, 4 figures, accepted by Phys. Lett.
    corecore