48 research outputs found
Measurements of sub-nT dynamic magnetic field shielding with soft iron and mu-metal for use in linear colliders
There is an increasing need to shield beams and accelerator elements from
stray magnetic fields. The application of magnetic shielding in linear
colliders is discussed. The shielding performance of soft iron and mu-metal is
measured for magnetic fields of varying amplitude and frequency. Special
attention is given to characterise the shielding performance for very
small-amplitude magnetic fields
Measurements and modelling of stray magnetic fields and the simulation of their impact on the Compact Linear Collider at 380 GeV
The Compact Linear Collider (CLIC) targets a nanometre beam size at the
collision point. Realising this beam size requires the generation and transport
of ultra-low emittance beams. Dynamic imperfections can deflect the colliding
beams, leading to a collision with a relative offset. They can also degrade the
emittance of each beam. Both of these effects can significantly impact the
luminosity of CLIC. In this paper, we examine a newly considered dynamic
imperfection: stray magnetic fields. Measurements of stray magnetic fields in
the Large Hadron Collider tunnel are presented and used to develop a
statistical model that can be used to realistically generate stray magnetic
fields in simulations. The model is used in integrated simulations of CLIC at
380GeV including mitigation systems for stray magnetic fields to evaluate their
impact on luminosity
Design and operation of a prototype interaction point beam collision feedback system for the International Linear Collider
A high-resolution, intratrain position feedback system has been developed to
achieve and maintain collisions at the proposed future electron-positron
International Linear Collider (ILC). A prototype has been commissioned and
tested with a beam in the extraction line of the Accelerator Test Facility at
the High Energy Accelerator Research Organization in Japan. It consists of a
stripline beam position monitor (BPM) with analogue signal-processing
electronics, a custom digital board to perform the feedback calculation, and a
stripline kicker driven by a high-current amplifier. The closed-loop feedback
latency is 148 ns. For a three-bunch train with 154 ns bunch spacing, the
feedback system has been used to stabilize the third bunch to 450 nm. The
kicker response is linear, and the feedback performance is maintained, over a
correction range of over 60 {\mu}m. The propagation of the correction has
been confirmed by using an independent stripline BPM located downstream of the
feedback system. The system has been demonstrated to meet the BPM resolution,
beam kick, and latency requirements for the ILC
The ESSnuSB design study: overview and future prospects
ESSnuSB is a design study for an experiment to measure the CP violation in
the leptonic sector at the second neutrino oscillation maximum using a neutrino
beam driven by the uniquely powerful ESS linear accelerator. The reduced impact
of systematic errors on sensitivity at the second maximum allows for a very
precise measurement of the CP violating parameter. This review describes the
fundamental advantages of measurement at the 2nd maximum, the necessary
upgrades to the ESS linac in order to produce a neutrino beam, the near and far
detector complexes, the expected physics reach of the proposed ESSnuSB
experiment, concluding with the near future developments aimed at the project
realization.Comment: 19 pages, 11 figures; Corrected minor error in alphabetical ordering
of the authors: the author list is now fully alphabetical w.r.t. author
surnames as was intended. Corrected an incorrect affiliation for two authors
per their reques
The Compact Linear Collider (CLIC) - 2018 Summary Report
The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear collider under development at CERN. Following the CLIC conceptual design published in 2012, this report provides an overview of the CLIC project, its current status, and future developments. It presents the CLIC physics potential and reports on design, technology, and implementation aspects of the accelerator and the detector. CLIC is foreseen to be built and operated in stages, at centre-of-mass energies of 380 GeV, 1.5 TeV and 3 TeV, respectively. CLIC uses a two-beam acceleration scheme, in which 12 GHz accelerating structures are powered via a high-current drive beam. For the first stage, an alternative with X-band klystron powering is also considered. CLIC accelerator optimisation, technical developments and system tests have resulted in an increased energy efficiency (power around 170 MW) for the 380 GeV stage, together with a reduced cost estimate at the level of 6 billion CHF. The detector concept has been refined using improved software tools. Significant progress has been made on detector technology developments for the tracking and calorimetry systems. A wide range of CLIC physics studies has been conducted, both through full detector simulations and parametric studies, together providing a broad overview of the CLIC physics potential. Each of the three energy stages adds cornerstones of the full CLIC physics programme, such as Higgs width and couplings, top-quark properties, Higgs self-coupling, direct searches, and many precision electroweak measurements. The interpretation of the combined results gives crucial and accurate insight into new physics, largely complementary to LHC and HL-LHC. The construction of the first CLIC energy stage could start by 2026. First beams would be available by 2035, marking the beginning of a broad CLIC physics programme spanning 25-30 years
High-resolution, low-latency, bunch-by-bunch feedback systems for nanobeam production and stabilization
High-precision intra-bunch-train beam orbit feedback correction systems have been developed and tested in the ATF2 beamline of the Accelerator Test Facility at the High Energy Accelerator Research Organization in Japan. Two systems are presented: 1) The vertical position of the bunch measured at two beam stripline position monitors (BPMs) is used to calculate a pair of kicks which are applied to the next bunch using two upstream kickers, thereby correcting both the vertical position and trajectory angle. This system was optimized so as to stabilize the beam offset at the feedback BPMs to better than 350 nm, yielding a local trajectory angle correction to within 250 nrad. Measurements with a beam size monitor at the focal point (IP) demonstrate that reducing the trajectory jitter of the beam by a factor of 4 also reduces the observed wakefield-induced increase in the measured beam size as a function of beam charge by a factor of c. 1.6. 2) High-resolution cavity BPMs were used to provide local beam stabilization in the IP region. The BPMs were demonstrated to achieve an operational resolution of ~20 nm. With the application of single-BPM and two-BPM feedback, beam stabilization of below 50 nm and 41 nm respectively has been achieved with a closed-loop latency of 232 ns
Measurements and modeling of stray magnetic fields and the simulation of their impact on the Compact Linear Collider at 380 GeV
The Compact Linear Collider (CLIC) targets a nanometre beam size at the collision point. Realising this beam size requires the generation and transport of ultra-low emittance beams. Dynamic imperfections can deflect the colliding beams, leading to a collision with a relative offset. They can also degrade the emittance of each beam. Both of these effects can significantly impact the luminosity of CLIC. In this paper, we examine a newly considered dynamic imperfection: stray magnetic fields. Measurements of stray magnetic fields in the Large Hadron Collider tunnel are presented and used to develop a statistical model that can be used to realistically generate stray magnetic fields in simulations. The model is used in integrated simulations of CLIC at 380,GeV including mitigation systems for stray magnetic fields to evaluate their impact on luminosity