94 research outputs found
D^* production from e^+e^- to ep collisions in NLO QCD
Fragmentation functions for D mesons, based on the convolution of a
perturbative part, related to the heavy quark perturbative showering, and a
non-perturbative model for its hadronization into the meson, are used to
describe D^* production in e^+e^- and ep collisions. The non-perturbative part
is determined by fitting the e^+e^- data taken by ARGUS and OPAL at 10.6 and
91.2 GeV respectively. When fitting with a non perturbative Peterson
fragmentation function and using next-to-leading evolution for the perturbative
part, we find an epsilon parameter sensibly different from the one commonly
used, which is instead found with a leading order fit. The use of this new
value is shown to increase considerably the cross section for D^* production at
HERA, suggesting a possible reconciliation between the next-to-leading order
theoretical predictions and the experimental data.Comment: 20 pages, LaTeX2e, 8 Postscript figure
Infinite Momentum Frame Calculation of Semileptonic Heavy \Lambda_b\to\Lambda_c Transitions Including HQET Improvements
We calculate the transition form factors that occur in heavy -type
baryon semileptonic decays as e.g. in . We use Bauer-Stech-Wirbel type infinite momentum frame wave
functions for the heavy -type baryons which we assume to consist of a
heavy quark and a light spin-isospin zero diquark system. The form factors at are calculated from the overlap integrals of the initial and final
-type baryon states. To leading order in the heavy mass scale the
structure of the form factors agrees with the HQET predictions including the
normalization at zero recoil. The leading order -dependence of the form
factors is extracted by scaling arguments. By comparing the model form factors
with the HQET predictions at we obtain a consistent set of
model form factors up to . With our preferred choice of
parameter values we find that the contribution of the non-leading form factor
is practically negligible. We use our form factor predictions to compute rates,
spectra and various asymmetry parameters for the semi-leptonic decay
.Comment: 24 pages, LaTeX, 6 figures are included in PostScript format. Final
version of paper to appear in Phys.Rev.
Composite Leptoquarks at the LHC
If electroweak symmetry breaking arises via strongly-coupled physics, the
observed suppression of flavour-changing processes suggests that fermion masses
should arise via mixing of elementary fermions with composite fermions of the
strong sector. The strong sector then carries colour charge, and may contain
composite leptoquark states, arising either as TeV scale resonances, or even as
light, pseudo-Nambu-Goldstone bosons. The latter, since they are coupled to
colour, get a mass of the order of several hundred GeV, beyond the reach of
current searches at the Tevatron. The same generic mechanism that suppresses
flavour-changing processes suppresses leptoquark-mediated rare processes,
making it conceivable that the many stringent constraints may be evaded. The
leptoquarks couple predominantly to third-generation quarks and leptons, and
the prospects for discovery at LHC appear to be good. As an illustration, a
model based on the Pati-Salam symmetry is described, and its embedding in
models with a larger symmetry incorporating unification of gauge couplings,
which provide additional motivation for leptoquark states at or below the TeV
scale, is discussed.Comment: 10 pp, version to appear in JHE
Kinematic Effects in Radiative Quarkonia Decays
Non-relativistic QCD (NRQCD) predicts colour octet contributions to be
significant not only in many production processes of heavy quarkonia but also
in their radiative decays. We investigate the photon energy distributions in
these processes in the endpoint region. There the velocity expansion of NRQCD
breaks down which requires a resummation of an infinite class of colour octet
operators to so-called shape functions. We model these non-perturbative
functions by the emission of a soft gluon cluster in the initial state. We
found that the spectrum in the endpoint region is poorly understood if the
values for the colour octet matrix elements are taken as large as indicated
from NRQCD scaling rules. Therefore the endpoint region should not be taken
into account for a fit of the strong coupling constant at the scale of the
heavy quark mass.Comment: LaTeX, 17 pages, 5 figures. The complete paper is also available via
the www at http://www-ttp.physik.uni-karlsruhe.de/Preprints
A Phenomenological Analysis of Gluon Mass Effects in Inclusive Radiative Decays of the and $\Upsilon
The shapes of the inclusive photon spectra in the processes \Jp \to \gamma
X and \Up \to \gamma X have been analysed using all available experimental
data.
Relativistic, higher order QCD and gluon mass corrections were taken into
account in the fitted functions. Only on including the gluon mass corrections,
were consistent and acceptable fits obtained. Values of
GeV and GeV were found for the
effective gluon masses (corresponding to Born level diagrams) for the \Jp and
\Up respectively. The width ratios \Gamma(V \to {\rm hadrons})/\Gamma(V \to
\gamma+ {\rm hadrons}) V=\Jp, \Up were used to determine and . Values consistent with the current world
average were obtained only when gluon mass correction factors,
calculated using the fitted values of the effective gluon mass, were applied. A
gluon mass GeV, as suggested with these results, is consistent with
previous analytical theoretical calculations and independent phenomenological
estimates, as well as with a recent, more accurate, lattice calculation of the
gluon propagator in the infra-red region.Comment: 50 pages, 11 figures, 15 table
One-Year Analysis of the Prospective Multicenter SENTRY Clinical Trial: Safety and Effectiveness of the Novate Sentry Bioconvertible Inferior Vena Cava Filter
Purpose
To prospectively assess the Sentry bioconvertible inferior vena cava (IVC) filter in patients requiring temporary protection against pulmonary embolism (PE).
Materials and Methods
At 23 sites, 129 patients with documented deep vein thrombosis (DVT) or PE, or at temporary risk of developing DVT or PE, unable to use anticoagulation were enrolled. The primary end point was clinical success, including successful filter deployment, freedom from new symptomatic PE through 60 days before filter bioconversion, and 6-month freedom from filter-related complications. Patients were monitored by means of radiography, computerized tomography (CT), and CT venography to assess filtering configuration through 60 days, filter bioconversion, and incidence of PE and filter-related complications through 12 months.
Results
Clinical success was achieved in 111 of 114 evaluable patients (97.4%, 95% confidence interval [CI] 92.5%–99.1%). The rate of freedom from new symptomatic PE through 60 days was 100% (n = 129, 95% CI 97.1%–100.0%), and there were no cases of PE through 12 months for either therapeutic or prophylactic indications. Two patients (1.6%) developed symptomatic caval thrombosis during the first month; neither experienced recurrence after successful interventions. There was no filter tilting, migration, embolization, fracture, or caval perforation by the filter, and no filter-related death through 12 months. Filter bioconversion was successful for 95.7% (110/115) at 6 months and for 96.4% (106/110) at 12 months.
Conclusions
The Sentry IVC filter provided safe and effective protection against PE, with a high rate of intended bioconversion and a low rate of device-related complications, through 12 months of imaging-intense follow-up
Illustration of microphysical processes in Amazonian deep convective clouds in the gamma phase space: introduction and potential applications
The behavior of tropical clouds remains a major open scientific question, resulting in poor representation by models. One challenge is to realistically reproduce cloud droplet size distributions (DSDs) and their evolution over time and space. Many applications, not limited to models, use the gamma function to represent DSDs. However, even though the statistical characteristics of the gamma parameters have been widely studied, there is almost no study dedicated to understanding the phase space of this function and the associated physics. This phase space can be defined by the three parameters that define the DSD intercept, shape, and curvature. Gamma phase space may provide a common framework for parameterizations and intercomparisons. Here, we introduce the phase space approach and its characteristics, focusing on warm-phase microphysical cloud properties and the transition to the mixed-phase layer. We show that trajectories in this phase space can represent DSD evolution and can be related to growth processes. Condensational and collisional growth may be interpreted as pseudo-forces that induce displacements in opposite directions within the phase space. The actually observed movements in the phase space are a result of the combination of such pseudo-forces. Additionally, aerosol effects can be evaluated given their significant impact on DSDs. The DSDs associated with liquid droplets that favor cloud glaciation can be delimited in the phase space, which can help models to adequately predict the transition to the mixed phase. We also consider possible ways to constrain the DSD in two-moment bulk microphysics schemes, in which the relative dispersion parameter of the DSD can play a significant role. Overall, the gamma phase space approach can be an invaluable tool for studying cloud microphysical evolution and can be readily applied in many scenarios that rely on gamma DSDs
Determination of nutrient salts by automatic methods both in seawater and brackish water: the phosphate blank
9 páginas, 2 tablas, 2 figurasThe main inconvenience in determining nutrients in seawater by automatic methods is simply solved:
the preparation of a suitable blank which corrects the effect of the refractive index change on the recorded
signal. Two procedures are proposed, one physical (a simple equation to estimate the effect) and the other
chemical (removal of the dissolved phosphorus with ferric hydroxide).Support for this work came from CICYT (MAR88-0245 project) and
Conselleria de Pesca de la Xunta de GaliciaPeer reviewe
APOSTEL 2.0 Recommendations for Reporting Quantitative Optical Coherence Tomography Studies.
OBJECTIVE
To update the consensus recommendations for reporting of quantitative optical coherence tomography (OCT) study results, thus revising the previously published Advised Protocol for OCT Study Terminology and Elements (APOSTEL) recommendations.
METHODS
To identify studies reporting quantitative OCT results, we performed a PubMed search for the terms "quantitative" and "optical coherence tomography" from 2015 to 2017. Corresponding authors of the identified publications were invited to provide feedback on the initial APOSTEL recommendations via online surveys following the principle of a modified Delphi method. The results were evaluated and discussed by a panel of experts and changes to the initial recommendations were proposed. A final survey was recirculated among the corresponding authors to obtain a majority vote on the proposed changes.
RESULTS
A total of 116 authors participated in the surveys, resulting in 15 suggestions, of which 12 were finally accepted and incorporated into an updated 9-point checklist. We harmonized the nomenclature of the outer retinal layers, added the exact area of measurement to the description of volume scans, and suggested reporting device-specific features. We advised to address potential bias in manual segmentation or manual correction of segmentation errors. References to specific reporting guidelines and room light conditions were removed. The participants' consensus with the recommendations increased from 80% for the previous APOSTEL version to greater than 90%.
CONCLUSIONS
The modified Delphi method resulted in an expert-led guideline (evidence Class III; Grading of Recommendations, Assessment, Development and Evaluations [GRADE] criteria) concerning study protocol, acquisition device, acquisition settings, scanning protocol, funduscopic imaging, postacquisition data selection, postacquisition analysis, nomenclature and abbreviations, and statistical approach. It will be essential to update these recommendations to new research and practices regularly
The OSCAR-MP consensus criteria for quality assessment of retinal optical coherence tomography angiography
BACKGROUND AND OBJECTIVES: Optical coherence tomography angiography (OCTA) is a noninvasive high-resolution imaging technique for assessing the retinal vasculature and is increasingly used in various ophthalmologic, neuro-ophthalmologic, and neurologic diseases. To date, there are no validated consensus criteria for quality control (QC) of OCTA. Our study aimed to develop criteria for OCTA quality assessment. METHODS: To establish criteria through (1) extensive literature review on OCTA artifacts and image quality to generate standardized and easy-to-apply OCTA QC criteria, (2) application of OCTA QC criteria to evaluate interrater agreement, (3) identification of reasons for interrater disagreement, revision of OCTA QC criteria, development of OCTA QC scoring guide and training set, and (4) validation of QC criteria in an international, interdisciplinary multicenter study. RESULTS: We identified 7 major aspects that affect OCTA quality: (O) obvious problems, (S) signal strength, (C) centration, (A) algorithm failure, (R) retinal pathology, (M) motion artifacts, and (P) projection artifacts. Seven independent raters applied the OSCAR-MP criteria to a set of 40 OCTA scans from people with MS, Sjogren syndrome, and uveitis and healthy individuals. The interrater kappa was substantial (? 0.67). Projection artifacts were the main reason for interrater disagreement. Because artifacts can affect only parts of OCTA images, we agreed that prior definition of a specific region of interest (ROI) is crucial for subsequent OCTA quality assessment. To enhance artifact recognition and interrater agreement on reduced image quality, we designed a scoring guide and OCTA training set. Using these educational tools, 23 raters from 14 different centers reached an almost perfect agreement (? 0.92) for the rejection of poor-quality OCTA images using the OSCAR-MP criteria. DISCUSSION: We propose a 3-step approach for standardized quality control: (1) To define a specific ROI, (2) to assess the occurrence of OCTA artifacts according to the OSCAR-MP criteria, and (3) to evaluate OCTA quality based on the occurrence of different artifacts within the ROI. OSCAR-MP OCTA QC criteria achieved high interrater agreement in an international multicenter study and is a promising QC protocol for application in the context of future clinical trials and studies
- …