18 research outputs found

    Polemika

    Get PDF
    ODPOWIEDĹą W SPRAWIE ANTROPOGENEZ

    Before the neolithization: Causes of mesolithic diversity in the Southern Balkans

    Get PDF
    The Balkans, particularly southern and central, were sparsely populated in the Mesolithic and the occupation networks in that period were discontinous and highly diversified, contrasting with the density and homogeneity of the Early Neolithic. The aim of this paper is to describe the environmental conditions of the Mesolithic sites in relation to Early Holocene climatic fluctuations and to discuss the causes of specificity and diversity of culture and behaviour at this period. Some general trends are observable in the adaptation to Early Holocene environments (trends in faunal exploitation; for ex. shift from high ranked large game to low ranked small animals) but also particular adaptations to local conditions (technological changes due to difficulties in access to better quality lithic raw materials, adaptations to coastal or to terrestrial resources reflecting the unique features of site use, etc). The diversity of the Mesolithic is also reflected in cultural taxonomy: in some sequences continuity of the Balkan Epigravettian techno-morphological tradition can be seen as opposed, in other sequences, to highly isolated groups with technology and tool morphology adapted to local raw materials and specific activities. The Balkan Mesolithic was not completely cut-off from the Western Mediterranean techno-morphological influences (particularly in Southern Greece) and from the Anatolian lithic traditions (seen only in the Northern Aegean). A more intensive network of marine contacts is confirmed by obsidian circulation in the Aegean Basin

    Linear Band Pottery Culture (LBK) lithic industry from Apc

    Get PDF
    The general inventory of the chipped stone artefacts coming from the LBK features at Apc indicates that a specific, small scale, local lithic production was conducted on-site. Majority of used raw materials are limnoquartzites (nearly 70%) originating mainly from the Mátra and Cserhát Mountains. The use of rather poor quality local raw materials influenced the technique of working raw materials, which was employed throughout the period of the functioning of LBK settlements at Apc. As a consequence, most tools were made on flakes. At the same time, as early as the oldest phase a limited supply of blade blanks and blade tools, produced elsewhere, was used. The ground stone artefacts and fragments included lower and upper grinding stones, plaquettes with polished surfaces, hammerstones, grinders/pounders. The raw materials used in the ground stone industry are either local (quartz, conglomerate, sandstone) or mesolocal (gabbro, basalt) coming from river alluvia or from the hills at the Hungarian—Slovakian border. Andesites, probably from the Mátra Mountains, occur in small quantities. Thus, the raw materials exploited at Apc demonstrate contacts with eastern region, however the site is the easternmost LBK settlement. | Az apci lelőhely VK-objektumaiból származó pattintottkő-leletek általános összetétele arra vall, hogy a telepen speciális, kis léptékű, helyi kőeszköz-előállítás folyt. Legnagyobb mennyiségben (közel 70%) limnokvarcitokat használtak fel nyersanyagként, amelyek a Mátra és a Cserhát hegységből származtak. A többnyire gyenge minőségű nyersanyagok felhasználása befolyásolta a feldolgozási technikákat is, amelyek nem változtak az apci VK-telep teljes fennállása alatt. Ennek következtében az eszközök nagyrészt szilánkon készültek. Ugyanakkor már a telep életének legkorábbi fázisától kezdve használtak egy kevés pengét és pengeeszközt is, amelyeket máshonnan szereztek be. A csiszolt eszközök és szerszámkövek között találunk alsó és felső őrlőköveket, csiszolt felületű kőlapokat, ütőköveket és mozsártörőket, valamint azok töredékeit. Az ebben az iparban felhasznált nyersanyagok vagy helyiek (kvarc, konglomerátum, homokkő), vagy regionálisak (gabbró, bazalt), amelyek folyóüledékekből vagy a magyar—szlovák határnál lévő hegyekből származhatnak. Kis mennyiségben előfordul andezit is, valószínűleg a Mátrából. Így hát az Apcon felhasznált kőnyersanyagok keleti területekkel mutatnak kapcsolatot, holott a lelőhely a nyugati VK legkeletibb települése

    Uwagi o kulturze mikockiej na GĂłrnym ĹšlÄ…sku : przyczynek do genezy kultury mikockiej w Europie Ĺšrodkowej

    Get PDF
    Two sites of the Micoquian Culture are known in the literature from Upper Silesia: Pietrowice Wielkie site 23 (excavations from the period between the two World Wars; see for example J.K. Ko-złowski 1964a, s. 79, 161) and Dzierżysław site 1 (excavations of 1962-1992; see E.M. Fołtyn, E. Fołtyn, J.K. Kozłowski 2000). Recently it has been possible to gain access to four other sites of this culture which were also discovered in the Inter-War period: Cyprzanów site 3, Maków site 15, Pietrowice Wielkie site 8, Pietrowice Wielkie site 76 (see M. Fajer, E.M. Fołtyn, E. Fołtyn, J.K. Ko-złowski, in print). Apart from these, a relatively rich collection of finds was collected in 1993-1997 on site 49 in Pietraszyn (see M. Fajer, E.M. Fołtyn, E. Fołtyn, J.K. Kozłowski, in print). All these sites occur on the Głubczyce Plateau and form a sort of concentration in the catchment areas of the Psina and Troja rivers (Fig. 1). Site 49 at Pietraszyn which has produced the largest number of finds (72 items) is probably a workshop where bifacial tools were produced. Here several varieties of Upper Silesian erratic flint were used (Table 8). The inventory exhibits a twofold dominance of tools (46 items) over flakes (24 examples). The tools were made (see Table 1) of nodules (of slab form), waste and pieces (52.17%) and flakes (47.83%). Bifacial tools with surface retouch dominate over unifacial ones. The working techniques were bifacial and trifacial. The sections of the tools are flat-convex and double flat-convex (Table 2). Attention is drawn by the occurrence of 14 side-scrapers, 8 asymmetric knives, 3 hand-axes (Figs 2b, 4a, 3) — among them of Micoquian type and Faustkeilblatt, one hand-axe/knife (Fig. 5a) and 11 retouched flakes (Figs 2a, 13d, 18c). Among the side-scrapers, bifacial forms predominate (Figs 5b, 14a, b, 10a, 15a, b, 16, 17a) over unifacial ones (Figs lib, 12a, b, 13a, b, c). Among the asymmetric knives are three Prondnik-knives (Figs 4b, 6a, b), one Bockstein type knife (Fig. 7b) and other types (Figs 7a, c, 8a, b). These tools are supplemented by one denticulated notched piece, two atypical perforators (Fig. 18b), one burin-core (Fig. 18a), one flake-like blade with retouch on the tip (Fig. 17b), three half-finished of knife/side-scrapers (Figs 10b, 9a, b) and one half-finished leaf point (Fig. 11a). The flakes come mainly from bifacial working. They are charac-terized by differentiation of the dorsal surface (Table 3-4). Their butts are most often unprepared (Table 5), bulbs are detached, thinned or flat (Table 6) and the angle of striking is obtuse (Table 7). The assemblage also contains two unclassified half-products. They exhibit traces of the start of the use of Levalloisian (Fig. 2a) and discoidal core technique. From the technological-morphological point of view the material from Pietraszyn site 49 exhi-bits certain similarities with artefacts from Mesvin IV (M. Cahen, J. Michel 1986). The similarities concern the occurrence of analogous hand-axes and asymmetric knives and the knowledge of Leval-loisian techniques. They also have similar chronology. The remaining sites have produced small assemblages with rather eastern European affinities. From Cyprzanów site 3 come two Prondnik-knives (Fig. 20a, c) and one half-product of a bifacial tool (Fig. 20b) and a bilateral side-scraper. In the assemblage from Pietrowice Wielkie site 8 a knife resembling the form of a Wolgograd type (Fig. 19a) was found, as was a convex convergent side-scraper. The inventory is completed by an atypical knife with alternately retouched back from Maków site 15 and a trifacially-worked ovoid knife from Pietrowice Wielkie site 76 (Fig. 19b). On the basis of the materials discovered so far, one may define two chronological horizons in the development of the Micoquian Culture in Upper Silesia. The inventories of Dzierżysław site 1 layer 6 and Pietraszyn site 49 belong to the older horizon (Warta stage or the end of the Lublin stage). The chronological position of the finds from Dzierżysław site 1 is determined by their stratigraphic position (Older Loess lib according to J. Jersak 1991) as well as TL dates of the deposits in which they lay (E.M. Fołtyn, E. Fołtyn, J.K. Kozłowski 2000). The assignation of Pietraszyn site 49 to the earlier horizon is also determined by the geological context of the finds: in the upper layers of alluvia of the Warta stage terrace (Fig. 21a, b). The material from Cyprzanów site 3 can also be assigned to the pre-Eemian period. By contrast the assemblages from Pietrowice Wielkie sites 8,23,76 and Maków site 15 can most probably be linked with the later horizon of development of the Micoquian Culture (the Eemian stage — the lower level of the middle Vistula substage). This would be indicated by the state or preserva-tion of the artefacts, and the local stratigraphic situation at the place of discovery. The inventories from the archaeological sites at Dzierżysław site 1, Pietraszyn site 49 and Cy-przanów site 3 (?) seem to confirm the existence in central Europe of eastern Micoquian industries earlier than the Eemian stage. The theory of the western origin of the eastern Micoquian Culture (see for example F. Delpech, J.-M. Geneste, J.-Ph. Rigaud, J.-P. Texier 1995, s. 155) would seem to require re-examination

    Excavation along the easternmost frontier of the LBK in NE-Hungary at Apc-Berekalja I (2008–2009)

    Get PDF
    The topographical position and size of the site, the number of detected houses, the presence of the early phase make the Apc-Berekalja I settlement one of the most significant sites of the LBK in Hungary. The ongoing processing of the excavation data provided already some very important observations. The geoarchaeological results demonstrated the presence of the in situ soil of the Neolithic period and effects of floods on the settlement. The study of the chipped and ground stone material coming from the Neolithic features revealed no conspicuous changes in the lithic industry of the settlement from the pre-Notenkopf to Želiezovce phases of the LBK. Lithic raw materials came exclusively from territories to the east of the site, which is an evidence of the isolation of the LBK groups that inhabited Apc. | Földrajzi helyzete, a lelőhely mérete, a megfigyelt házak száma és a korai fázis megléte alapján Apc-Berekalja I. az egyik legjelentősebb magyarországi VK-település. Az ásatási adatok még folyamatban lévő feldolgozása során közlésre méltó eredmények születtek. A geoarcheológiai vizsgálatok kimutatták egy neolitikus korú talaj in situ meglétét, valamint a települést sújtó áradásokat. A neolitikus korú objektumokból származó pattintott és szerszámkövek a település fennállása alatt a kőipar lényegi változatlanságáról tanúskodnak a VK korai időszakától a zselízi fázisáig. A településen élők a kőnyersanyagokat kizárólag a keletre eső területekről szerezték be, ami az itt lakó csoport izoláltságát igazolja

    Evolution and environment of the eastern linear pottery culture: A case study in the site of Polgár-Piócási-Dűlő

    Get PDF
    A salvage excavation preceding a major investment project was conducted in 2006–2007, during which associated settlement features of a Middle Neolithic, Eastern Linear Pottery Culture (Alföld Linearbandkeramik – ALBK) were uncovered in an area called Piócási-dűlő on the eastern outskirts of Polgár. The features of the ALBK settlement date from two periods. The cluster of multi-functional pits yielding a rich assortment of finds, the handful of post-holes and an unusual ritual well found in the southern part of the investigated area formed one unit from the earliest phase of the Middle Neolithic (ALBK I). The settlement’s other occupation can be assigned to the late phase of the Middle Neolithic (ALBK IV). Five houseplans representing the remains of timber-framed buildings outlined a distinct area with three multi-functional pits. Associated with the above features were 8 burials. The preliminary archaeobotanical results from Polgár–Piócási-dűlő are based on the plant material found within the sediments of 11 archaeological structures, which mainly represent pits and a welI. It can be stated that the natural environment offered habitats in which oak trees dominated in the local vegetation, forming floodplain forests and wooded steppes. They also provided food in the form of fruits and formed an optimal habitat for domestic animals. Arable fields were probably also established in the vicinity of the settlements, suggested by findings of macroscopic plant remains that represented cultivated species. In both settlement phases lithic production activities are manifested both by the local on-site lithic production and – most importantly – by the presence of imported, mainly mesolocal, raw materials that point to contacts with deposit areas, or off-site preliminary working of obsidian and limnoquartzites. The kit of harvesting tools and a large number of grinding stones – especially in the younger phase – for the preparation of plant food suggest a major role of plant cultivation

    Polgár-bosnyákdomb – lithic assemblages

    No full text
    This is a study of the stone tools found in the rubble of a Prototiszapolgár culture house and the humus layer above during the 2007 excavations of Polgár-Bosnyákdomb. This assemblage marks an important interface between Late Neolithic and Early Copper Age lithic industries in this transitional period. The repertoire of raw materials is dominated by specimens from eastern sources, while the technology is characterized with Late Neolithic traditions. | Polgár-Bosnyákdomb lelőhelyről két sorozat kőeszköz-anyagot elemeztünk: az egyik a ház omladékából (376 db), a másik a fölötte lévő humuszrétegből származott (342 db). A két, statisztikailag jelentős sorozat megfelel a településen megfigyelt proto-tiszapolgári kultúra fázisának.A pattintott kőeszközök változatos nyersanyagból készültek: makroszkópos módszerrel 27 fajta szilikátos kőzetet tudtunk elkülöníteni, amelyek gyakran meglehetősen távoli területekről származnak. A ház és a humuszréteg leletanyagában a pontosabban nem meghatározható, de mezozoikus rétegből származó kovák domináltak. Hat kovatípus olyan nyersanyagból készült, amely Nyugat- és főként Délnyugat-Románia területéről ismert mészkő rétegekben fordul elő. A következő nyersanyag, amelyből pattintott kőeszközöket állítottak elő, a limnokvarcit – ezt közepes távolságból szerezték be, a Tokaji- és a Zempléni-hegységből. A Kárpáti I. típusú obszidián a ház leletanyagának 12,2%-át, míg a humuszrétegnek 17,0%-át adta. Távoli, „északi” nyersanyagokból is készültek eszközök, így a Kraków–Czêstochowa-fennsík jura kori tűzkövéből és a Visztula középső medencéjének területéről eredeztethető „csokoládé” kovából. A Dnyeszter felső folyásának medencéjéből származó, kréta kori kova előfordulása a házban meglehetősen alacsony (4,7%), de a humuszrétegben már magasabb (7,0%). Más nyersanyagok csak szórványosan fordulnak elő – például a Mátra vidéki vörös radiolarit vagy jáspis, illetve a talán kelet-szlovákiai szarukő.A pattintott kőeszközök nyersanyagának változatosságával ellentétben a csiszolt eszközöké már nem ilyen gazdag: a kőipar nagy része tokaji fehér tufából és homokkőből készült.A Polgár-Bosnyákdomb lelőhelyen használt kő nyersanyag összetétele alapvető változásokat jelez a késő neolitikum–rézkor váltásának idején. Bár a nagyon változatos nyersanyagtípusok már a tiszai kultúra késői időszakára is jellemzőek, irányultságuk mégis kelet felé módosul. A folyamatot jól jelzi a talán nyugat-romániai mezozoikus kovák és a Kárpátokon túli területekről származó krétai kovák megjelenése. A nyersanyagforrások eltolódása részben megfelel a proto-tiszapolgári kultúra kelet felé történő terjeszkedésének. Az északnyugati kapcsolatok meglétét az obszidián és a limnokvarcit nyersanyagok bizonyítják.A magköveket elő-magkő formájában szállították a lelőhelyre, míg az obszidián kis, 2–4 cm átmérőjű rögökben került a településre. A magkövek aránya 4,5%, a tűzköveké 44,5%, a pengéké 26,5%, végül az eszközöké 15,1%. A nagyobb eszköztípusok ilyenfajta megoszlása általában olyan lelőhelyekre jellemző, ahol az eszközöket helyben készítik és használják, de ahol a redukció csak részben történt a helyszínen.A bosnyákdombi pengék „mediolithic” technikával készültek. Ez azt jelenti, hogy a lelőhely kőipara korábbi, mint a rézkor kezdetére jellemző ún. „metrikus forradalom” (amikor a makrolitikus eszközöket nyomásos technikával állítják elő). Csak a tiszapolgári – valamint a késő lengyeli – kultúrákra jellemző ez a fajta technológiai átalakulás. A retusált eszközök csoportja szintén közelebb áll a tiszai és lengyeli kultúrákhoz, mint a rézkori iparokéhoz. Ezt a vakarók és a vakaró-csonkított eszközök magas száma, illetve a trapézok, retusált pengék és fúrók jelenléte jelzi.A retusált eszközök összetétele sokban emlékeztet a középső és késő neolitikum technológiai-stiláris hagyományaira, bár néhány jellegzetességük már inkább a rézkori iparokra utal. Fontos megemlíteni, hogy a használati nyomok elemzése alapján az eszközöket csak igen kis számban használták aratásra; sokkal jellemzőbb a bőr- és famegmunkálás
    corecore