Design considerations for a monolithic, GaAs, dual-mode, QPSK/QASK, high-throughput rate transceiver

A monolithic, GaAs, dual mode, quadrature amplitude shift keying and quadrature phase shift keying transceiver with one and two billion bits per second data rate is being considered to achieve a low power, small and ultra high speed communication system for satellite as well as terrestrial purposes. Recent GaAs integrated circuit achievements are surveyed and their constituent device types are evaluated. Design considerations, on an elemental level, of the entire modem are further included for monolithic realization with practical fabrication techniques. Numerous device types, with practical monolithic compatability, are used in the design of functional blocks with sufficient performances for realization of the transceiver

Advanced digital modulation: Communication techniques and monolithic GaAs technology

Communications theory and practice are merged with state-of-the-art technology in IC fabrication, especially monolithic GaAs technology, to examine the general feasibility of a number of advanced technology digital transmission systems. Satellite-channel models with (1) superior throughput, perhaps 2 Gbps; (2) attractive weight and cost; and (3) high RF power and spectrum efficiency are discussed. Transmission techniques possessing reasonably simple architectures capable of monolithic fabrication at high speeds were surveyed. This included a review of amplitude/phase shift keying (APSK) techniques and the continuous-phase-modulation (CPM) methods, of which MSK represents the simplest case

Long-Lasting Effect of Infant Rats Endotoxemia on Heat Shock Protein 60 in the Pancreatic Acinar Cells: Involvement of Toll-Like Receptor 4

Introduction. Lipopolysaccharide endotoxin (LPS) is responsible for septic shock and multiorgan failure, but pretreatment of rats with low doses of LPS reduced pancreatic acute damage. Aim. We investigated the effects of the endotoxemia induced in the early period of life on Toll-like receptor 4 (TLR4), heat shock protein 60 (HSP60) and proapoptotic Bax, caspase-9 and -3 or antiapoptotic Bcl-2 protein expression in the pancreatic acinar cells of adult animals. Material and Methods. Newborn rats (25 g) were injected with endotoxin (Escherichia coli) for 5 consecutive days. Two months later, pancreatic acinar cells were isolated from all groups of animals and subjected to caerulein stimulation (10−8 M). Protein expression was assessed employing Western blot. For detection of apoptosis we have employed DNA fragmentation ladder assay. Results. Preconditioning of newborn rats with LPS increased TLR4, Caspase-9 and -3 levels, but failed to affect basal expression of HSP60, Bax, and Bcl-2. Subsequent caerulein stimulation increased TLR4, Bcl-2, and caspases, but diminished HSP60 and Bax proteins in pancreatic acinar cells. Endotoxemia dose-dependently increased TLR4, Bax, HSP60, and both caspases protein signals in the pancreatic acini, further inhibiting antiapoptotic Bcl-2. Conclusions. Endotoxemia promoted the induction of HSP60 via TLR4 in the infant rats and participated in the LPS-dependent pancreatic tissue protection against acute damage

Ni−W/ZrO2Ni-W/ZrO_2 nanocomposites obtained by ultrasonic DC electrodeposition

Composite coatings consisting of a nanocrystalline Ni–W alloy matrix reinforced with ZrO2 particles (average size of 50 nm) were synthesized by electrochemical deposition assisted by an external ultrasonic field. The Ni–W/ZrO2 coatings were deposited from aqueous sulphate–citrate electrolytes containing zirconia nanopowder in suspension on steel substrates in a system with a rotating disk electrode (RDE). The influence of relevant processing parameters (i.e., concentration of zirconia powder in plating bath, current density, hydrodynamic conditions, ultrasonic field frequency) on the composite characteristics was discussed. Based on micromechanical (microhardness, Young’s modulus) and microstructural (morphology, phase composition, crystallite size) properties of the coatings, the conditions for electrodeposition of crack-free, homogeneous Ni–W/ZrO2 nanocomposites with enhanced functional properties have been developed

The feasibility of using electromagnetic waves in determining the moisture content of building fabrics and the cause of the water ingress

In this paper, the feasibility of using electromagnetic (EM) waves is determining the moisture content of building fabrics and the case of water ingress in experimentally assessed. This paper will concentrate on investigating the propagation of EM waves through typical structures and their interaction with concealed pipework, wiring and timber. All current methods are overviewed and analysed. Novel microwave sensor described in this paper operates in 6 GHz to 12 GHz frequency range using Marconi 6200A microwave test set. Results of experimental test confirm that microwaves can be used as an alternative nondestructive method for identifying different object behind the walls

Chaos induced coherence in two independent food chains

Coherence evolution of two food web models can be obtained under the stirring effect of chaotic advection. Each food web model sustains a three--level trophic system composed of interacting predators, consumers and vegetation. These populations compete for a common limiting resource in open flows with chaotic advection dynamics. Here we show that two species (the top--predators) of different colonies chaotically advected by a jet--like flow can synchronize their evolution even without migration interaction. The evolution is charaterized as a phase synchronization. The phase differences (determined through the Hilbert transform) of the variables representing those species show a coherent evolution.Comment: 5 pages, 5 eps figures. Accepted for publication in Phys. Rev.

Mechanical and Tribological Properties of Carbon-Based Graded Coatings

The paper presents research on coatings with advanced architecture, composed of a Cr/Cr2N ceramic/metal multilayer and graded carbon layers with varying properties from Cr/a-C:H to a-C:N. The microstructure of the coatings was analysed using transmission electron microscopy and Energy Dispersive Spectroscopy, the mechanical properties were tested by nanoindentation, spherical indentation, and scratch testing, and tribological tests were also conducted. The proper selection of subsequent layers in graded coatings allowed high hardness and fracture resistance to be obtained as well as good adhesion to multilayers. Moreover, these coatings have higher wear resistance than single coatings and a friction coefficient equal to 0.25

Three-dimensional virtual-reality surgical planning and soft-tissue prediction for orthognathic surgery

Complex maxillofacial malformations continue to present challenges in analysis and correction beyond modern technology. The purpose of this paper is to present a virtual-reality workbench for surgeons to perform virtual orthognathic surgical planning and soft-tissue prediction in three dimensions. A resulting surgical planning system, i.e., three-dimensional virtual-reality surgical-planning and soft-tissue prediction for orthognathic surgery, consists of four major stages: computed tomography (CT) data post-processing and reconstruction, three-dimensional (3-D) color facial soft-tissue model generation, virtual surgical planning and simulation, soft-tissue-change preoperative prediction. The surgical planning and simulation are based on a 3-D CT reconstructed bone model, whereas the soft-tissue prediction is based on color texture-mapped and individualized facial soft-tissue model. Our approach is able to provide a quantitative osteotomy-simulated bone model and prediction of postoperative appearance with photorealistic quality. The prediction appearance can be visualized from any arbitrary viewing point using a low-cost personal-computer-based system. This cost-effective solution can be easily adopted in any hospital for daily use.published_or_final_versio

A flexible, extensible object oriented real-time near photorealistic visualization system:the system framework design

In this paper we describe a novel, extensible visualization system currently under development at Aston University. We introduce modern programming methods, such as the use of data driven programming, design patterns, and the careful definition of interfaces to allow easy extension using plug-ins, to 3D landscape visualization software. We combine this with modern developments in computer graphics, such as vertex and fragment shaders, to create an extremely flexible, extensible real-time near photorealistic visualization system. In this paper we show the design of the system and the main sub-components. We stress the role of modern programming practices and illustrate the benefits these bring to 3D visualization. © 2006 Springer-Verlag Berlin Heidelberg