Room-temperature synthesis of zinc oxide nanoparticles in different media and their application in cyanide photodegradation

Cyanide is an extreme hazard and extensively found in the wastes of refinery, coke plant, and metal plating industries. A simple, fast, cost-effective, room-temperature wet chemical route, based on cyclohexylamine, for synthesizing zinc oxide nanoparticles in aqueous and enthanolic media was established and tested for the photodegradation of cyanide ions. Particles of polyhedra morphology were obtained for zinc oxide, prepared in ethanol (ZnO(E)), while spherical and some chunky particles were observed for zinc oxide, prepared in water (ZnO(W)). The morphology was crucial in enhancing the cyanide ion photocatalytic degradation efficiency of ZnO(E) by a factor of 1.5 in comparison to the efficiency of ZnO(W) at an equivalent concentration of 0.02 wt.% ZnO. Increasing the concentration wt.% of ZnO(E) from 0.01 to 0.09 led to an increase in the photocatalytic degradation efficiency from 85% to almost 100% after 180 min and a doubling of the first-order rate constant (k)

Removal of hazardous pharmaceutical from water by photocatalytic treatment

The photocatalytic abatement of hazardous pharmaceuticals has been investigated at very low concentration in the ppb range as found in wastewater and in environmental pollutants. Photocatalytic degradation of tetracycline as a model compound with titania catalysts has been studied using solarium UV-A and black light with differentially applied electric power, tetracycline and catalyst concentration. Abatement of up to 90% has been achieved after 1 hour. Adsorption of tetracycline and photochemical degradation contribute significantly to the abatement of tetracycline resulting in an immediate reduction during the initial period of treatment. Contribution of adsorption is high at very low concentration (500 ppb). Photocatalytic treatment with titania is even highly efficient in the abatement of very small concentrations of tetracycline in drinking water. © 2010 Versita Warsaw and Springer-Verlag Wien

Bromocresol Green/Mesoporous Silica Adsorbent for Ammonia Gas Sensing via an Optical Sensing Instrument

A meso-structured Al-MCM-41 material was impregnated with bromocresol green (BG) dye and then incorporated into a UV-Vis DRA spectroscopic instrument for the online detection of ammonia gas. The absorption response of the Al-MCM-41/BG ammonia sensing material was very sensitive at the optical absorption wavelength of 630 nm. A high linear correlation was achieved for ppmv and sub-ppmv levels of ammonia gas. The response time for the quantitative detection of ammonia gas concentrations ranging from 0.25 to 2.0 ppmv was only a few minutes. The lower detection limit achieved was 0.185 ppmv. The color change process was fully reversible during tens of cycling tests. These features together make this mesoporous Al-MCM-41 material very promising for optical sensing applications

The Assembly-Disassembly-Organization-Reassembly mechanism for 3D-2D-3D transformation of germanosilicate IWW zeolite

This research was part funded by EPSRC grant number EP/K025112/1. The article processing charge for this article was funded through the RCUK open access block grant.Hydrolysis of germanosilicate zeolites with the IWW structure shows two different outcomes depending on the composition of the starting materials. Ge-rich IWW (Si/Ge=3.1) is disassembled into a layered material (IPC-5P), which can be reassembled into an almost pure silica IWW on treatment with diethoxydimethylsilane. Ge-poor IWW (Si/Ge=6.4) is not completely disassembled on hydrolysis, but retains some 3D connectivity. This structure can be reassembled into IWW by incorporation of Al to fill the defects left when the Ge is removed.Publisher PDFPeer reviewe