388 research outputs found
Review of Methods of Power-Spectrum Analysis as Applied to Super-Kamiokande Solar Neutrino Data
To help understand why different published analyses of the Super-Kamiokande
solar neutrino data arrive at different conclusions, we have applied six
different methods to a standardized problem. The key difference between the
various methods rests in the amount of information that each processes. A
Lomb-Scargle analysis that uses the mid times of the time bins and ignores
experimental error estimates uses the least information. A likelihood analysis
that uses the start times, end times, and mean live times, and takes account of
the experimental error estimates, makes the greatest use of the available
information. We carry out power-spectrum analyses of the Super-Kamiokande 5-day
solar neutrino data, using each method in turn, for a standard search band (0
to 50 yr-1). For each method, we also carry out a fixed number (10,000) of
Monte-Carlo simulations for the purpose of estimating the significance of the
leading peak in each power spectrum. We find that, with one exception, the
results of these calculations are compatible with those of previously published
analyses. (We are unable to replicate Koshio's recent results.) We find that
the significance of the peaks at 9.43 yr-1 and at 43.72 yr-1 increases
progressively as one incorporates more information into the analysis procedure.Comment: 21 pages, 25 figure
Measurement of the solar 8B neutrino rate with a liquid scintillator target and 3 MeV energy threshold in the Borexino detector
We report the measurement of electron neutrino elastic scattering from 8B
solar neutrinos with 3 MeV energy threshold by the Borexino detector in Gran
Sasso (Italy). The rate of solar neutrino-induced electron scattering events
above this energy in Borexino is 0.217 +- 0.038 (stat) +- 0.008 (syst) cpd/100
t, which corresponds to the equivalent unoscillated flux of (2.4 +- 0.4 (stat)
+- 0.1 (syst))x10^6 cm^-2 s^-1, in good agreement with measurements from SNO
and SuperKamiokaNDE. Assuming the 8B neutrino flux predicted by the high
metallicity Standard Solar Model, the average 8B neutrino survival probability
above 3 MeV is measured to be 0.29+-0.10. The survival probabilities for 7Be
and 8B neutrinos as measured by Borexino differ by 1.9 sigma. These results are
consistent with the prediction of the MSW-LMA solution of a transition in the
solar electron neutrino survival probability between the low energy
vacuum-driven and the high-energy matter-enhanced solar neutrino oscillation
regimes.Comment: 10 pages, 8 figures, 6 table
Low-energy (anti)neutrino physics with Borexino: Neutrinos from the primary proton-proton fusion process in the Sun
The Sun is fueled by a series of nuclear reactions that produce the energy
that makes it shine. The primary reaction is the fusion of two protons into a
deuteron, a positron and a neutrino. These neutrinos constitute the vast
majority of neutrinos reaching Earth, providing us with key information about
what goes on at the core of our star. Several experiments have now confirmed
the observation of neutrino oscillations by detecting neutrinos from secondary
nuclear processes in the Sun; this is the first direct spectral measurement of
the neutrinos from the keystone proton-proton fusion. This observation is a
crucial step towards the completion of the spectroscopy of pp-chain neutrinos,
as well as further validation of the LMA-MSW model of neutrino oscillations.Comment: Proceedings from NOW (Neutrino Oscillation Workshop) 201
Recommended from our members
Measurement of geo-neutrinos from 1353 days of Borexino
We present a measurement of the geo--neutrino signal obtained from 1353 days
of data with the Borexino detector at Laboratori Nazionali del Gran Sasso in
Italy. With a fiducial exposure of (3.69 0.16) proton
year after all selection cuts and background subtraction, we detected
(14.3 4.4) geo-neutrino events assuming a fixed chondritic mass Th/U
ratio of 3.9. This corresponds to a geo-neutrino signal = (38.8
12.0) TNU with just a 6 probability for a null geo-neutrino
measurement. With U and Th left as free parameters in the fit, the relative
signals are = (10.6 12.7) TNU and =
(26.5 19.5) TNU. Borexino data alone are compatible with a mantle
geo--neutrino signal of (15.4 12.3) TNU, while a combined analysis with
the KamLAND data allows to extract a mantle signal of (14.1 8.1) TNU. Our
measurement of a reactor anti--neutrino signal =
84.5 TNU is in agreement with expectations in the presence of
neutrino oscillations.Comment: 9 pages, 6 figure
Recommended from our members
Search for Solar Axions Produced in Reaction with Borexino Detector
A search for 5.5-MeV solar axions produced in the reaction was performed using the Borexino detector. The Compton
conversion of axions to photons, ; the
axio-electric effect, ; the decay of axions into
two photons, ; and inverse Primakoff conversion on
nuclei, , are considered. Model independent
limits on axion-electron (), axion-photon (), and
isovector axion-nucleon () couplings are obtained: and at 1 MeV (90% c.l.). These limits are
2-4 orders of magnitude stronger than those obtained in previous
laboratory-based experiments using nuclear reactors and accelerators.Comment: 11 pages, 7 figures, submitted to Phys.Rev.
Muon and Cosmogenic Neutron Detection in Borexino
Borexino, a liquid scintillator detector at LNGS, is designed for the
detection of neutrinos and antineutrinos from the Sun, supernovae, nuclear
reactors, and the Earth. The feeble nature of these signals requires a strong
suppression of backgrounds below a few MeV. Very low intrinsic radiogenic
contamination of all detector components needs to be accompanied by the
efficient identification of muons and of muon-induced backgrounds. Muons
produce unstable nuclei by spallation processes along their trajectory through
the detector whose decays can mimic the expected signals; for isotopes with
half-lives longer than a few seconds, the dead time induced by a muon-related
veto becomes unacceptably long, unless its application can be restricted to a
sub-volume along the muon track. Consequently, not only the identification of
muons with very high efficiency but also a precise reconstruction of their
tracks is of primary importance for the physics program of the experiment. The
Borexino inner detector is surrounded by an outer water-Cherenkov detector that
plays a fundamental role in accomplishing this task. The detector design
principles and their implementation are described. The strategies adopted to
identify muons are reviewed and their efficiency is evaluated. The overall muon
veto efficiency is found to be 99.992% or better. Ad-hoc track reconstruction
algorithms developed are presented. Their performance is tested against muon
events of known direction such as those from the CNGS neutrino beam, test
tracks available from a dedicated External Muon Tracker and cosmic muons whose
angular distribution reflects the local overburden profile. The achieved
angular resolution is 3-5 deg and the lateral resolution is 35-50 cm, depending
on the impact parameter of the crossing muon. The methods implemented to
efficiently tag cosmogenic neutrons are also presented.Comment: 42 pages. 32 figures on 37 files. Uses JINST.cls. 1 auxiliary file
(defines.tex) with TEX macros. submitted to Journal of Instrumentatio
Muon and Cosmogenic Neutron Detection in Borexino
Borexino, a liquid scintillator detector at LNGS, is designed for the
detection of neutrinos and antineutrinos from the Sun, supernovae, nuclear
reactors, and the Earth. The feeble nature of these signals requires a strong
suppression of backgrounds below a few MeV. Very low intrinsic radiogenic
contamination of all detector components needs to be accompanied by the
efficient identification of muons and of muon-induced backgrounds. Muons
produce unstable nuclei by spallation processes along their trajectory through
the detector whose decays can mimic the expected signals; for isotopes with
half-lives longer than a few seconds, the dead time induced by a muon-related
veto becomes unacceptably long, unless its application can be restricted to a
sub-volume along the muon track. Consequently, not only the identification of
muons with very high efficiency but also a precise reconstruction of their
tracks is of primary importance for the physics program of the experiment. The
Borexino inner detector is surrounded by an outer water-Cherenkov detector that
plays a fundamental role in accomplishing this task. The detector design
principles and their implementation are described. The strategies adopted to
identify muons are reviewed and their efficiency is evaluated. The overall muon
veto efficiency is found to be 99.992% or better. Ad-hoc track reconstruction
algorithms developed are presented. Their performance is tested against muon
events of known direction such as those from the CNGS neutrino beam, test
tracks available from a dedicated External Muon Tracker and cosmic muons whose
angular distribution reflects the local overburden profile. The achieved
angular resolution is 3-5 deg and the lateral resolution is 35-50 cm, depending
on the impact parameter of the crossing muon. The methods implemented to
efficiently tag cosmogenic neutrons are also presented.Comment: 42 pages. 32 figures on 37 files. Uses JINST.cls. 1 auxiliary file
(defines.tex) with TEX macros. submitted to Journal of Instrumentatio
Recommended from our members
Lifetime measurements of 214Po and 212Po with the CTF liquid scintillator detector at LNGS
We have studied the alpha decays of 214Po into 210Pb and of 212Po into 208Pb
tagged by the coincidence with the preceding beta decays from 214Bi and 212Bi,
respectively. The employed 222Rn, 232Th, and 220Rn sources were sealed inside
quartz vials and inserted in the Counting Test Facility at the underground Gran
Sasso National Laboratory in Italy. We find that the mean lifetime of 214Po is
(236.00 +- 0.42(stat) +- 0.15(syst)) \mu s and that of 212Po is (425.1 +-
0.9(stat) +- 1.2(syst)) ns. Our results, obtained from data with
signal-to-background ratio larger than 1000, reduce the overall uncertainties
and are compatible with previous measurements.Comment: RevTex, 11 pages, 5 figures, 3 tables. This second version matches
the one accepted for publication in EPJA: minor stylistic changes plus a
discussion of calibration of TDC time scal
Muon and Cosmogenic Neutron Detection in Borexino
Borexino, a liquid scintillator detector at LNGS, is designed for the
detection of neutrinos and antineutrinos from the Sun, supernovae, nuclear
reactors, and the Earth. The feeble nature of these signals requires a strong
suppression of backgrounds below a few MeV. Very low intrinsic radiogenic
contamination of all detector components needs to be accompanied by the
efficient identification of muons and of muon-induced backgrounds. Muons
produce unstable nuclei by spallation processes along their trajectory through
the detector whose decays can mimic the expected signals; for isotopes with
half-lives longer than a few seconds, the dead time induced by a muon-related
veto becomes unacceptably long, unless its application can be restricted to a
sub-volume along the muon track. Consequently, not only the identification of
muons with very high efficiency but also a precise reconstruction of their
tracks is of primary importance for the physics program of the experiment. The
Borexino inner detector is surrounded by an outer water-Cherenkov detector that
plays a fundamental role in accomplishing this task. The detector design
principles and their implementation are described. The strategies adopted to
identify muons are reviewed and their efficiency is evaluated. The overall muon
veto efficiency is found to be 99.992% or better. Ad-hoc track reconstruction
algorithms developed are presented. Their performance is tested against muon
events of known direction such as those from the CNGS neutrino beam, test
tracks available from a dedicated External Muon Tracker and cosmic muons whose
angular distribution reflects the local overburden profile. The achieved
angular resolution is 3-5 deg and the lateral resolution is 35-50 cm, depending
on the impact parameter of the crossing muon. The methods implemented to
efficiently tag cosmogenic neutrons are also presented.Comment: 42 pages. 32 figures on 37 files. Uses JINST.cls. 1 auxiliary file
(defines.tex) with TEX macros. submitted to Journal of Instrumentatio
Borexino calibrations: Hardware, Methods, and Results
Borexino was the first experiment to detect solar neutrinos in real-time in
the sub-MeV region. In order to achieve high precision in the determination of
neutrino rates, the detector design includes an internal and an external
calibration system. This paper describes both calibration systems and the
calibration campaigns that were carried out in the period between 2008 and
2011. We discuss some of the results and show that the calibration procedures
preserved the radiopurity of the scintillator. The calibrations provided a
detailed understanding of the detector response and led to a significant
reduction of the systematic uncertainties in the Borexino measurements
- …