Substitution of Ti3+ and Ti4+ in hibonite (CaAl12O19)

The structures of eight synthetic samples of hibonite, with variable Ti oxidation state and Ti concentration (2.4–15.9 wt% TiO2) that span the range reported for natural hibonite found in meteorites, were determined by Rietveld refinements of neutron powder diffraction data. Ti3+ was found to exclusively occupy the octahedral face-sharing M4 site irrespective of the presence or absence of Ti4+. Ti4+ partitions between the trigonal bipyramidal M2 site and the M4 site. The ratio (Ti4+ on M2):(Ti4+ on M4) appears to be constant for all the samples, with an average of 0.18(2) irrespective of the concentrations of Ti3+ and Ti4+. These substitutional sites were shown to be the most stable configurations for Ti in hibonite from calculations using density functional theory, although the predicted preference of Ti4+ for M4 over M2 is not as strong as is observed. This is attributed to the different Ti contents of the experimental and calculated structures and suggests that the Ti site occupancies might change between these concentrations. Furthermore, it is shown that Ti has a preference to occupy neighboring M4 sites such that Ti-Ti interactions occur with stabilization energies of 83 kJ/mol for Ti3+-Ti3+ and at least 15 kJ/mol for Ti4+-Ti4+. Features in optical spectroscopy and electron spin resonance data from meteoritic and synthetic hibonites that have been used to infer Ti3+/Ti4+ are shown to actually derive from these Ti-Ti interactions. The amount of Ti4+ in hibonite can be determined from the unit-cell parameters if ∑Ti is determined independently. Ti3+/Ti4+ in hibonite may record the oxygen fugacity (fO2) of the early solar nebula, however, the existence of Ti3+-Ti3+ and Ti4+-Ti4+ interactions and the potential for Ti4+-Ti3+ interactions need to be considered when interpreting spectroscopic data in terms of Ti valence state and fO2. Hibonite as a single-mineral oxybarometer must be used with caution due to the potential role of crystal chemistry (including Ti-Ti interactions) to stabilize Ti oxidation states independently of fO2

Universality, limits and predictability of gold-medal performances at the Olympic Games

Inspired by the Games held in ancient Greece, modern Olympics represent the world's largest pageant of athletic skill and competitive spirit. Performances of athletes at the Olympic Games mirror, since 1896, human potentialities in sports, and thus provide an optimal source of information for studying the evolution of sport achievements and predicting the limits that athletes can reach. Unfortunately, the models introduced so far for the description of athlete performances at the Olympics are either sophisticated or unrealistic, and more importantly, do not provide a unified theory for sport performances. Here, we address this issue by showing that relative performance improvements of medal winners at the Olympics are normally distributed, implying that the evolution of performance values can be described in good approximation as an exponential approach to an a priori unknown limiting performance value. This law holds for all specialties in athletics-including running, jumping, and throwing-and swimming. We present a self-consistent method, based on normality hypothesis testing, able to predict limiting performance values in all specialties. We further quantify the most likely years in which athletes will breach challenging performance walls in running, jumping, throwing, and swimming events, as well as the probability that new world records will be established at the next edition of the Olympic Games.Comment: 8 pages, 3 figures, 1 table. Supporting information files and data are available at filrad.homelinux.or

Fate and transport of volatile organic compounds in glacial till and groundwater at an industrial site in Northern Ireland

Volatile organic compound (VOC) contamination of subsurface geological material and groundwater was discovered on the Nortel Monkstown industrial site, Belfast, Northern Ireland. The objectives of this study were to (1) investigate the characteristics of the geological material and its influences on contaminated groundwater flow across the site using borehole logs and hydrological evaluations, and (2) identify the contaminants and examine their distribution in the subsurface geological material and groundwater using chemical analysis. This report focuses on the eastern car park (ECP) which was a former storage area associated with trichloroethene (TCE) degreasing operations. This is where the greatest amount of volatile organic compounds (VOCs), particularly TCE, were detected. The study site is on a complex deposit of clayey glacial till with discontinuous coarser grained lenses, mainly silts, sands and gravel, which occur at 0.45-7.82 m below ground level (bgl). The lenses overall form an elongated formation that acts as a small unconfined shallow aquifer. There is a continuous low permeable stiff clayey till layer beneath the lenses that performs as an aquitard to the groundwater. Highest concentrations of VOCs, mainly TCE, in the geological material and groundwater are in these coarser lenses at similar to 4.5-7 m bgl. Highest TCE measurements at 390,000 mu g L-1 for groundwater and at 39,000 mu g kg(-1) at 5.7 m for geological material were in borehole GA19 in the coarse lens zone. It is assumed that TCE gained entrance to the subsurface near this borehole where the clayey till was thin to absent above coarse lenses which provided little retardation to the vertical migration of this dense non-aqueous phase liquid (DNAPL) into the groundwater. However, TCE is present in low concentrations in the geological material overlying the coarse lens zone. Additionally, VOCs appear to be associated with poorly drained layers and in peat < 3.0 m bgl in the ECP. Some indication of natural attenuation as VOCs degradation products vinyl chloride (VC) and dichloromethane (DCM) also occur on the site

Risk factors for progression from severe maternal morbidity to death: a national cohort study.

Women continue to die unnecessarily during or after pregnancy in the developed world. The aim of this analysis was to compare women with severe maternal morbidities who survived with those who died, to quantify the risk associated with identified factors to inform policy and practice to improve survival

Recruitment to randomised trials : Strategies for Trial Enrolment and Participation Study. The STEPS study

Objectives: To identify factors associated with good and poor recruitment to multicentre trials. Data sources: Part A: database of trials started in or after 1994 and were due to end before 2003 held by the Medical Research Council and Health Technology Assessment Programmes. Part B: interviews with people playing a wide range of roles within four trials that their funders identified as ‘exemplars’. Part C: a large multicentre trial (the CRASH trial) of treatment for head injury. Review methods: The study used a number of different perspectives (‘multiple lenses’), and three components. Part A: an epidemiological review of a cohort of trials. Part B: case studies of trials that appeared to have particularly interesting lessons for recruitment. Part C: a single, in-depth case study to examine the feasibility of applying a businessorientated analytical framework as a reference model in future trials. Results: In the 114 trials found in Part A, less than one-third recruited their original target within the time originally specified, and around one-third had extensions. Factors observed more often in trials that recruited successfully were: having a dedicated trial manager, being a cancer or drug trial, and having interventions only available inside the trial. The most commonly reported strategies to improve recruitment were newsletters and mailshots, but it was not possible to assess whether they were causally linked to changes in recruitment. The analyses in Part B suggested that successful trials were those addressing clinically important questions at a timely point. The investigators were held in high esteem by the interviewees, and the trials were firmly grounded in existing clinical practices, so that the trial processes were not alien to clinical collaborators, and the results could be easily applicable to future practice. The interviewees considered that the needs of patients were well served by participation in the trials. Clinical collaborators particularly appreciated clear delineation of roles, which released them from much of the workload associated with trial participation. There was a strong feeling from interviewees that they were proud to be part of a successful team. This pride fed into further success. Good groundwork and excellent communications across many levels of complex trial structures were considered to be extremely important, including training components for learning about trial interventions and processes, and team building. All four trials had faced recruitment problems, and extra insights into the working of trials were afforded by strategies invoked to address them. The process of the case study in Part C was able to draw attention to a body of research and practice in a different discipline (academic business studies). It generated a reference model derived from a combination of business theory and work within CRASH. This enabled identification of weaker managerial components within CRASH, and initiatives to strengthen them. Although it is not clear, even within CRASH, whether the initiatives that follow from developing and applying the model will be effective in increasing recruitment or other aspects of the success of the trial, the reference model could provide a template, with potential for those managing other trials to use or adapt it, especially at foundation stages. The model derived from this project could also be used as a diagnostic tool if trials have difficulties and hence as a basis for deciding what type of remedial action to take. It may also be useful for auditing the progress of trials, such as during external review. Conclusions: While not producing sufficiently definitive results to make strong recommendations, the work here suggests that future trials should consider the different needs at different phases in the life of trials, and place greater emphasis on ‘conduct’ (the process of actually doing trials). This implies learning lessons from successful trialists and trial managers, with better training for issues relating to trial conduct. The complexity of large trials means that unanticipated difficulties are highly likely at some time in every trial. Part B suggested that successful trials were those flexible and robust enough to adapt to unexpected issues. Arguably, the trialists should also expect agility from funders within a proactive approach to monitoring ongoing trials. Further research into different recruitment patterns (including ‘failures’) may help to clarify whether the patterns seen in the ‘exemplar’ trials differ or are similar. The reference model from Part C needs to be further considered in other similar and different trials to assess its robustness. These and other strategies aimed at increasing recruitment and making trials more successful need to be formally evaluated for their effectiveness in a range of trials.Not peer reviewedPublisher PD

Self-Navigated Tissue Phase Mapping Using a Golden-Angle Spiral Acquisition-Proof of Concept in Patients with Pulmonary Hypertension

Purpose To create a high temporal- and spatial-resolution retrospectively cardiac-gated, tissue phase mapping (TPM) sequence, using an image-based respiratory navigator calculated from the data itself. Methods The sequence was based on a golden-angle spiral acquisition. Reconstruction of real-time images allowed creation of an image-based navigator. The expiratory spiral interleaves were then retrospectively cardiac-gated using data binning. TPM data were acquired in 20 healthy volunteers and 10 patients with pulmonary hypertension. Longitudinal and radial myocardial velocities were calculated in the left ventricle and right ventricle. Results The image-based navigator was shown to correlate well with simultaneously acquired airflow data in 10 volunteers(r=0.93±0.04). The TPM navigated images had a significantly higher subjective image quality and edge sharpness (P<0.0001) than averaged spiral TPM. No significant differences in myocardial velocities were seen between conventional Cartesian TPM with navigator respiratory-gating and the proposed self-navigated TPM technique, in 10 volunteers. Significant differences in the velocities were seen between the volunteers and patients in the left ventricle at systole and end diastole and in the right ventricle at end diastole. Conclusion The feasibility of measuring myocardial motion using a golden-angle spiral TPM sequence was demonstrated, with an image-based respiratory navigator calculated from the TPM data itself

Assessing newborn body composition using principal components analysis: differences in the determinants of fat and skeletal size

BACKGROUND: Birth weight is a composite of skeletal size and soft tissue. These components are likely to have different growth patterns. The aim of this paper is to investigate the association between established determinants of birth weight and these separate components. METHODS: Weight, length, crown-rump, knee-heel, head circumference, arm circumference, and skinfold thicknesses were measured at birth in 699 healthy, term, UK babies recruited as part of the Exeter Family Study of Childhood Health. Corresponding measurements were taken on both parents. Principal components analysis with varimax rotation was used to reduce these measurements to two independent components each for mother, father and baby: one highly correlated with measures of fat, the other with skeletal size. RESULTS: Gestational age was significantly related to skeletal size, in both boys and girls (r = 0.41 and 0.52), but not fat. Skeletal size at birth was also associated with parental skeletal size (maternal: r = 0.24 (boys), r = 0.39 (girls) ; paternal: r = 0.16 (boys), r = 0.25 (girls)), and maternal smoking (0.4 SD reduction in boys, 0.6 SD reduction in girls). Fat was associated with parity (first borns smaller by 0.45 SD in boys; 0.31 SD in girls), maternal glucose (r = 0.18 (boys); r = 0.27 (girls)) and maternal fat (r = 0.16 (boys); r = 0.36 (girls)). CONCLUSION: Principal components analysis with varimax rotation provides a useful method for reducing birth weight to two more meaningful components: skeletal size and fat. These components have different associations with known determinants of birth weight, suggesting fat and skeletal size may have different regulatory mechanisms, which would be important to consider when studying the associations of birth weight with later adult disease

Tribological properties of room temperature fluorinated graphite heat-treated under fluorine atmosphere

This work is concerned with the study of the tribologic properties of room temperature fluorinated graphite heat-treated under fluorine atmosphere. The fluorinated compounds all present good intrinsic friction properties (friction coefficient in the range 0.05–0.09). The tribologic performances are optimized if the materials present remaining graphitic domains (influenced by the presence of intercalated fluorinated species) whereas the perfluorinated compounds, where the fluorocarbon layers are corrugated (armchair configuration of the saturated carbon rings) present higher friction coefficients. Raman analyses reveal that the friction process induces severe changes in the materials structure especially the partial re-building of graphitic domains in the case of perfluorinated compounds which explains the improvement of μ during the friction tests for these last materials

Development of a life expectancy table for individuals with type 1 diabetes

Aims/hypothesis:Tables reporting life expectancies by common risk factors are available for individuals with type 2 diabetes; however, there is currently no published equivalent for individuals with type 1 diabetes. We aimed to develop a life expectancy table using a recently published simulation model for individuals with type 1 diabetes.Methods: The simulation model was developed using data from a real-world population of patients with type 1 diabetes selected from the Swedish National Diabetes Register. The following six important risk factors were included in the life table: sex; age; current smoking status; BMI; eGFR; and HbA1c. For each of 1024 cells in the life expectancy table, a synthetic cohort containing 1000 individuals was created, with other risk factors assigned values representative of the real-world population. The simulations were executed for all synthetic cohorts and life expectancy for each cell was calculated as mean survival time of the individuals in the respective cohort.Results: There was a substantial variation in life expectancy across patients with different risk factor levels. Life expectancy of 20-year-old men varied from 29.3 years to 50.6 years, constituting a gap of 21.3 years between those with worst and best risk factor levels. In 20-year-old women, this gap was 18.9 years (life expectancy range 35.0-53.9 years). The variation in life expectancy was a function of the combination of risk factor values, with HbA1c and eGFR consistently showing a negative and positive correlation, respectively, with life expectancy at any level combination of other risk factors. Individuals with the lowest level (20 kg/m2) and highest level of BMI (35 kg/m2) had a lower life expectancy compared with those with a BMI of 25 kg/m2. Non-smokers and women had a higher life expectancy than smokers and men, respectively, with the difference in life expectancy ranging from 0.4 years to 2.7 years between non-smokers and smokers, and from 1.9 years to 5.9 years between women and men, depending on levels of other risk factors.Conclusions/interpretation: The life expectancy table generated in this study shows a substantial variation in life expectancy across individuals with different modifiable risk factors. The table allows for rapid communications of risk in an easily understood format between healthcare professionals, health economists, researchers, policy makers and patients. Particularly, it supports clinicians in their discussion with patients about the benefits of improving risk factors

The Mechanisms of Codon Reassignments in Mitochondrial Genetic Codes

Many cases of non-standard genetic codes are known in mitochondrial genomes. We carry out analysis of phylogeny and codon usage of organisms for which the complete mitochondrial genome is available, and we determine the most likely mechanism for codon reassignment in each case. Reassignment events can be classified according to the gain-loss framework. The gain represents the appearance of a new tRNA for the reassigned codon or the change of an existing tRNA such that it gains the ability to pair with the codon. The loss represents the deletion of a tRNA or the change in a tRNA so that it no longer translates the codon. One possible mechanism is Codon Disappearance, where the codon disappears from the genome prior to the gain and loss events. In the alternative mechanisms the codon does not disappear. In the Unassigned Codon mechanism, the loss occurs first, whereas in the Ambiguous Intermediate mechanism, the gain occurs first. Codon usage analysis gives clear evidence of cases where the codon disappeared at the point of the reassignment and also cases where it did not disappear. Codon disappearance is the probable explanation for stop to sense reassignments and a small number of reassignments of sense codons. However, the majority of sense to sense reassignments cannot be explained by codon disappearance. In the latter cases, by analysis of the presence or absence of tRNAs in the genome and of the changes in tRNA sequences, it is sometimes possible to distinguish between the Unassigned Codon and Ambiguous Intermediate mechanisms. We emphasize that not all reassignments follow the same scenario and that it is necessary to consider the details of each case carefully.Comment: 53 pages (45 pages, including 4 figures + 8 pages of supplementary information). To appear in J.Mol.Evo