967 research outputs found
A simple, ultrahigh vacuum compatible scanning tunneling microscope for use at variable temperatures
We present the construction of a very compact scanning tunneling microscope (STM) which can be operated at temperatures between 4 and 350 K. The tip and a tiny tip holder are the only movable parts, whereas the sample and the piezoscanner are rigidly attached to the body of the STM. This leads to an excellent mechanical stability. The coarse approach system relies on the slip-stick principle and is operated by the same piezotube which is used for scanning. As an example of the performance of the device, images of a NbSe2 surface with atomic resolution are obtained
Bibliography on HIV/AIDS in Ethiopia and Ethiopians in the Diaspora: The 2006 Update
No Abstract. The Ethiopian Journal of Health Development Vol. 21 (1) 2007: pp. 70-9
Bibliography on HIV/AIDS in Ethiopia and Ethiopians in the Diaspora: The 2013 Update
No Abstrac
Behavior Of Spandrel Beams Strengthened With Steel Fibers Under Combined Loading
Anggota konkrit mengalami kilasan diiringi juga dengan lenturan dan ricihan. Sehingga
kini, kod amalan reka bentuk anggota-anggota konkrit bertetulang menganggap bahawa
kesan kilasan dapat dielakkan dengan selamat disebabkan faktor keselamatan yang
tinggi digunakan dalam lenturan dan ricihan. Justeru itu, gabungan beban terhadap
anggota-anggota tidak diberi perhatian yang serius. Namun demikian, andaian ini sudah
tidak boleh diaplikasi lagi kerana isu kilasan kini merupakan perkara biasa dan
memainkan peranan yang signifikan dalam struktur, contohnya rasuk spandrel. Rasuk
spandrel atau dikenali juga sebagai rasuk-L, amat bergantung pada perimeter bangunan.
Sebarang kegagalan pada rasuk spandrel boleh menjadi serius sehingga mencacatkan
papak, sumbungan tiang-rasuk dan tebukan plat rata konkrit. Dengan mencampurkan
gentian keluli sebagai bahan tambahan, ia boleh meningkatkan kekuatan kilasan rasuk
spandrel di bawah beban gabungan dan prestasi struktur konkrit seperti beban
maksimum, kemuluran dan rintangan retak. Gentian keluli boleh merintangi gabungan
beban seperti rakap dan tetulang membujur, namun penyelidikan di dalam bidang ini
masih samar dan terhad. Lebih-lebih lagi kepentingan menggunakan bertetulang gentian
dalam struktur konkrit untuk diaplikasi dalam infrastruktur awam telah meningkat. Oleh
yang demikian, pengetahuan sedia ada tentang konkrit gentian keluli sepaiknya
digabungjalinkan dalam kod amalan reka bentuk. Eksperimen dijalankan untuk menilai
perlakuan rasuk spandrel gentian yang diperkukuh dengan gentian keluli tertakluk pada
gabungan kilasan, lenturan dan ricihan. Sejumlah 18 rasuk spandrel disediakan dan diuji
dengan dua gabungan beban biasa i.e. kilasan tinggi terhadap nisbah lenturan dan
kilasan rendah terhadap nisbah lenturan. Sampel rasuk dibahagikan kepada tiga
kumpulan, iaitu rasuk konkrit biasa, spesimen dengan tetulang pengukuh memanjang,
dan spesimen dengan tertulang dan rakap. Semua kes dikaji dengan pecahan isipadu
gentian keluli 0%, 1%, dan 1.5%. Rasuk konkrit bertetulang gentian mempamerkan
prestasi keseluruhan yang baik berbanding dengan rasuk kawalan tanpa gentian.
Diperhatikan sumbangan utama daripada gentian keluli ke atas tingkah laku kilasan
adalah terhadap keretakan konkrit. Penambahan gentian keluli adalah penting untuk
rasuk tanpa tetulang keluli konvensional, penambahan ini terbukti mampu meningkatkan
kapasiti semasa kilasan. Di samping itu, analisis berangka melalui kaedah elemen
terhingga dilakukan terhadap data eksperimen untuk meramalkan tingkah laku struktur
rasuk spandrel. Satu teknik baru diutara untuk mengambilkira kesan gentian keluli
dalam elemen konkrit dan kesan titik lembut konkrit dalam mampatan dan tegangan.
Kelakuan umum model unsur terhingga yang diwakili plot kilas-piuh dan plot bebanlenturan
menunjukkan hubungan yang baik dengan data ujian daripada rasuk kawalan
dan rasuk spandrel. Walau bagaimanapun, model unsur terhingga menunjukkan
kekukuhan yang tinggi berbanding dengan data ujian dalam julat tidak linear untuk
rasuk tanpa tetulang keluli.
________________________________________________________________________________________________________________________
Important concrete members are subjected to significant torsion accompanied by
bending and shear. Until recent years, the design codes of reinforced concrete members
assumed that the effects of torsion could be safely neglected due to high safety factors
for shear and bending moment. Thus, members under combined loading were not treated
with serious attention. However, this assumption cannot be applied anymore as torsion
issues become common and play a significant role in structural members, such as
spandrel beams. The spandrel beam, or the L-beam, lies on the perimeter of buildings.
Any failure in spandrel beams can seriously damage slabs, beam-column connections,
and punch concrete flat-plates. By incorporating steel fibers, it can enhance torsional
behavior of spandrel beam under combined load in addition to the structural
performance such as maximum load, ductility and cracking resistance. Steel fibers may
provide resistance to combined loading as stirrups and longitudinal bars, this
investigation is still scare and limited. Moreover, a worldwide interest in utilizing fiber
reinforced concrete structures for civil infrastructure applications has increased. This
study presents the advantage of using steel fiber concrete in strengthening spandrel
beams under different reinforcement and loading cases. An experimental investigation
was conducted to assess the behavior of steel fiber reinforced concrete spandrel beams
subjected to combined torsion, bending, and shear. A total of 18 spandrel beams were
prepared and tested with two common loading combinations i.e. high torque to bending
ratio and low torque to bending ratio. All beams were divided into three groups, namely,
plain concrete beams, specimens with longitudinal reinforcing bars and specimens with
bars and stirrups. All cases were examined with 0%, 1%, and 1.5% steel fiber volume
fractions. Fibrous concrete beams exhibited improved overall torsional performance
with respect to the corresponding non-fibrous control beams. The main contribution of
steel fibers on the torsional behavior is mainly observed after concrete cracking. The
addition of steel fibers was essential to the beams without conventional steel
reinforcement since fibers were the only reinforcement and proved capable to provide
enhanced torsional moment capacities. Besides, a numerical analysis by finite element
method was suggested against the experimental data to predict the structural behavior of
spandrel beams. A new technique was presented to incorporate the effects of steel fibers
within concrete element and the softening effect of concrete in compression and tension.
The general behavior of the finite element model represented by the torque-twist plot
and load-deflection plots show good agreement with the test data from the plain and
fiber reinforced spandrel beam. However, the finite element models show higher
stiffness than the test data in the nonlinear ranges for beams without steel reinforcement
Bibliography on HIV/AIDS in Ethiopia and Ethiopians in the Diaspora: The 2011 Update
No abstract
Konnatale Schädelimpression: Fallbericht und Literaturübersicht
A 40-week gestational age infant was delivered by cesarean section because of intense contractions and pathological fetal heart rate pattern. The umbilical artery pH was 7.03, Apgar scores were 1/4/7 at 1, 5 and 10 min of age. The 3,250-gram infant had a skull depression of 5 x 7 cm in the left temporal-parietal region with a depth of 1.5 cm. There were no edemas or hematomas in this area; neurological examination was normal. A CT scan did not show a fracture, but the cortex below the depression appeared slightly compressed. At the age of 11 days, the depressed part of the parietal squama was surgically elevated. The child was discharged in good condition 8 days later and remained well at a 6-month follow-up examination
Minigap, Parity Effect and Persistent Currents in SNS Nanorings
We have evaluated a proximity-induced minigap in the density of states (DOS)
of SNS junctions and SNS nanorings at an arbitrary concentration of
non-magnetic impurities. We have demonstrated that an isotropic energy minigap
in the electron spectrum opens up already at arbitrarily weak disorder, while
angle resolved DOS at higher energies can remain strongly anisotropic. The
minigap value can be tuned by passing a supercurrent through an
SNS junction or by applying a magnetic flux to an SNS ring. A
non-monotonous dependence of on has been found at weak
disorder. We have also studied persistent currents in isolated SNS nanorings.
For odd number of electrons in the ring we have found a non-trivial
current-phase (current-flux) relation which -- at relatively high disorder --
may lead to a -junction state and spontaneous currents in the ground state
of the system.Comment: 7 pages, 8 figure
Approaching the Coverability Problem Continuously
The coverability problem for Petri nets plays a central role in the
verification of concurrent shared-memory programs. However, its high
EXPSPACE-complete complexity poses a challenge when encountered in real-world
instances. In this paper, we develop a new approach to this problem which is
primarily based on applying forward coverability in continuous Petri nets as a
pruning criterion inside a backward coverability framework. A cornerstone of
our approach is the efficient encoding of a recently developed polynomial-time
algorithm for reachability in continuous Petri nets into SMT. We demonstrate
the effectiveness of our approach on standard benchmarks from the literature,
which shows that our approach decides significantly more instances than any
existing tool and is in addition often much faster, in particular on large
instances.Comment: 18 pages, 4 figure
Porcine and Canine von Willebrand Factor and von Willebrand Disease: Hemostasis, Thrombosis, and Atherosclerosis Studies
Use of animal models of inherited and induced von Willebrand factor (VWF) deficiency continues to advance the knowledge of VWF-related diseases: von Willebrand disease (VWD), thrombotic thrombocytopenic purpura (TTP), and coronary artery thrombosis. First, in humans, pigs, and dogs, VWF is essential for normal hemostasis; without VWF bleeding events are severe and can be fatal. Second, the ADAMTS13 cleavage site is preserved in all three species suggesting all use this mechanism for normal VWF multimer processing and that all are susceptible to TTP when ADAMTS13 function is reduced. Third, while the role of VWF in atherogenesis is debated, arterial thrombosis complicating atherosclerosis appears to be VWF-dependent. The differences in the VWF gene and protein between humans, pigs, and dogs are relatively few but important to consider in the design of VWF-focused experiments. These homologies and differences are reviewed in detail and their implications for research projects are discussed. The current status of porcine and canine VWD are also reviewed as well as their potential role in future studies of VWF-related disorders of hemostasis and thrombosis
- …