1,056 research outputs found
Structure factor of thin films near continuous phase transitions
The two-point correlation function in thin films is studied near the critical
point of the corresponding bulk system. Based on fieldtheoretic renormalization
group theory the dependences of this correlation function on the lateral
momentum, the two distances normal to the free surfaces, temperature, and film
thickness are determined. The corresponding scattering cross section of X-rays
and neutrons under grazing incidence is calculated. It reveals the various
singularities of the two-point correlation function.Comment: 61 pages, 14 figures, submitted to PR
Parasites of the Deep-Sea Smelt Bathylagus euryops (Argentiniformes: Microstomatidae) from the Charlie-Gibbs Fracture Zone (CGFZ)
The deep-sea smelt Bathylagus euryops, caught in July 2004 at the Charlie-Gibbs Fracture Zone (CGFZ) of the Mid-Atlantic Ridge (North Atlantic), was studied for metazoan parasites and diet composition. A total of 86 specimens with standard lengths between 6.4 and 22.1 cm (mean 13.6 cm) were examined. The parasite fauna consisted of five species: three Digenea, one Cestoda and one Nematoda. The predominant parasites were Lecithaster sp. (Digenea) and an unidentified bothriocephalidean cestode. The only nematode, Anisakis sp., occurred with a low prevalence. Bathylagus euryops at CGFZ serves as final host for the three digeneans, and as intermediate host for the cestodes and Anisakis sp. Stomach content analysis revealed a mesozooplankton crustacean diet, while 95.3% of the stomachs contained unidentified tissue
Adaptive Radiation within Marine Anisakid Nematodes: A Zoogeographical Modeling of Cosmopolitan, Zoonotic Parasites
Parasites of the nematode genus Anisakis are associated with aquatic organisms. They can be found in a variety of marine hosts including whales, crustaceans, fish and cephalopods and are known to be the cause of the zoonotic disease anisakiasis, a painful inflammation of the gastro-intestinal tract caused by the accidental consumptions of infectious larvae raw or semi-raw fishery products. Since the demand on fish as dietary protein source and the export rates of seafood products in general is rapidly increasing worldwide, the knowledge about the distribution of potential foodborne human pathogens in seafood is of major significance for human health. Studies have provided evidence that a few Anisakis species can cause clinical symptoms in humans. The aim of our study was to interpolate the species range for every described Anisakis species on the basis of the existing occurrence data. We used sequence data of 373 Anisakis larvae from 30 different hosts worldwide and previously published molecular data (n = 584) from 53 field-specific publications to model the species range of Anisakis spp., using a interpolation method that combines aspects of the alpha hull interpolation algorithm as well as the conditional interpolation approach. The results of our approach strongly indicate the existence of species-specific distribution patterns of Anisakis spp. within different climate zones and oceans that are in principle congruent with those of their respective final hosts. Our results support preceding studies that propose anisakid nematodes as useful biological indicators for their final host distribution and abundance as they closely follow the trophic relationships among their successive hosts. The modeling might although be helpful for predicting the likelihood of infection in order to reduce the risk of anisakiasis cases in a given area
Fatigue Behavior of High Strength Steel S890Q Containing Thermally Cut Straight Edges
This paper evaluates the effect of different thermal cutting methods on the fatigue life of high strength steel S890Q. The investigation covers flame, plasma and laser cutting methodologies, and specimens with rectangular sections and cut straight edges. The experimental program is composed of 30 specimens that were conducted to failure by applying fatigue cycles with a stress ratio (R) of 0.1 in a high frequency testing machine. The resultant best-fit S-N curves have been compared, revealing a better performance for laser cut straight edges. Moreover, the corresponding Eurocode 3 FAT class has been derived for each of the three cutting methods, resulting in FAT160 in all cases. This suggests that the use Eurocode 3 FAT125, which is the fatigue class currently provided for flame cut straight edges, is an overconservative assumption for thermally cut straight edges in steel S890Q, regardless of the thermal cutting technique being used (flame, laser or plasma)
Fatigue performance of thermally cut bolt holes in structural steel S460M
Current fatigue codes only consider the fatigue performance of drilled and punched holes, limiting the use of thermal cutting processes to produce bolt holes. This paper studies the fatigue performance of structural steel S460M plates containing thermally cut bolt holes. The research covers three thermal cutting methods: the traditional one (oxy-fuel cutting) and two more modern processes (plasma and laser cutting). Specimen geometry is defined by a rectangular cross section with a cut hole in the middle.
All the specimens were conducted to failure by applying fatigue cycles, the stress ratio (R) being 0.1. The corresponding S-N curve and fatigue limit were obtained for each cutting method. Fatigue results have been compared with previous researches on fatigue performance of drilled and punched holes, and with the predictions provided by current fatigue standards, analyzing the possibility to extrapolate their S-N curves, focused on drilled and punched holes, to thermally cut holes
Polymer depletion interaction between two parallel repulsive walls
The depletion interaction between two parallel repulsive walls confining a
dilute solution of long and flexible polymer chains is studied by
field-theoretic methods. Special attention is paid to self-avoidance between
chain monomers relevant for polymers in a good solvent. Our direct approach
avoids the mapping of the actual polymer chains on effective hard or soft
spheres. We compare our results with recent Monte Carlo simulations [A. Milchev
and K. Binder, Eur. Phys. J. B 3, 477 (1998)] and with experimental results for
the depletion interaction between a spherical colloidal particle and a planar
wall in a dilute solution of nonionic polymers [D. Rudhardt, C. Bechinger, and
P. Leiderer, Phys. Rev. Lett. 81, 1330 (1998)].Comment: 17 pages, 3 figures. Final version as publishe
Quantum Quenches in Extended Systems
We study in general the time-evolution of correlation functions in a extended
quantum system after the quench of a parameter in the hamiltonian. We show that
correlation functions in d dimensions can be extracted using methods of
boundary critical phenomena in d+1 dimensions. For d=1 this allows to use the
powerful tools of conformal field theory in the case of critical evolution.
Several results are obtained in generic dimension in the gaussian (mean-field)
approximation. These predictions are checked against the real-time evolution of
some solvable models that allows also to understand which features are valid
beyond the critical evolution.
All our findings may be explained in terms of a picture generally valid,
whereby quasiparticles, entangled over regions of the order of the correlation
length in the initial state, then propagate with a finite speed through the
system. Furthermore we show that the long-time results can be interpreted in
terms of a generalized Gibbs ensemble. We discuss some open questions and
possible future developments.Comment: 24 Pages, 4 figure
Distribution, Population Biology, and Trophic Ecology of the Deepwater Demersal Fish Halosauropsis macrochir (Pisces: Halosauridae) on the Mid-Atlantic Ridge
Halosauropsis macrochir ranked amongst the most abundant and widespread demersal fishes on the mid-Atlantic Ridge of the North Atlantic (Iceland-Azores) with greatest abundance at 1700–3500 m. All sizes, ranging from 10–76 cm total length, occurred in the area without any apparent spatial pattern or depth trend. Using otolith sections displaying growth increments assumed to represent annuli, the age range recorded was 2–36 years, but most individuals were <20 years. Length and weight at age data were used to fit growth models. No differences between sexes in length and weight at age were observed. The majority of samples had a surplus of males. Diet analysis showed that H. macrochir feeds on Crustacea, Teleostei, Polychaeta, and Cephalopoda, but few prey could be identified to lower taxonomical levels. The mid-Atlantic Ridge constitutes a major portion of the North Atlantic living space of the abyssal halosaur where it completes its full life cycle, primarily as an actively foraging euryophagous micronekton/epibenthos and infauna feeder, becoming a partial piscivore with increasing size
Critical dynamics in thin films
Critical dynamics in film geometry is analyzed within the field-theoretical
approach. In particular we consider the case of purely relaxational dynamics
(Model A) and Dirichlet boundary conditions, corresponding to the so-called
ordinary surface universality class on both confining boundaries. The general
scaling properties for the linear response and correlation functions and for
dynamic Casimir forces are discussed. Within the Gaussian approximation we
determine the analytic expressions for the associated universal scaling
functions and study quantitatively in detail their qualitative features as well
as their various limiting behaviors close to the bulk critical point. In
addition we consider the effects of time-dependent fields on the
fluctuation-induced dynamic Casimir force and determine analytically the
corresponding universal scaling functions and their asymptotic behaviors for
two specific instances of instantaneous perturbations. The universal aspects of
nonlinear relaxation from an initially ordered state are also discussed
emphasizing the different crossovers that occur during this evolution. The
model considered is relevant to the critical dynamics of actual uniaxial
ferromagnetic films with symmetry-preserving conditions at the confining
surfaces and for Monte Carlo simulations of spin system with Glauber dynamics
and free boundary conditions.Comment: 64 pages, 21 figure
Identification of a novel zinc metalloprotease through a global analysis of clostridium difficile extracellular proteins
Clostridium difficile is a major cause of infectious diarrhea worldwide. Although the cell surface proteins are recognized to be important in clostridial pathogenesis, biological functions of only a few are known. Also, apart from the toxins, proteins exported by C. difficile into the extracellular milieu have been poorly studied. In order to identify novel extracellular factors of C. difficile, we analyzed bacterial culture supernatants prepared from clinical isolates, 630 and R20291, using liquid chromatography-tandem mass spectrometry. The majority of the proteins identified were non-canonical extracellular proteins. These could be largely classified into proteins associated to the cell wall (including CWPs and extracellular hydrolases), transporters and flagellar proteins. Seven unknown hypothetical proteins were also identified. One of these proteins, CD630_28300, shared sequence similarity with the anthrax lethal factor, a known zinc metallopeptidase. We demonstrated that CD630_28300 (named Zmp1) binds zinc and is able to cleave fibronectin and fibrinogen in vitro in a zinc-dependent manner. Using site-directed mutagenesis, we identified residues important in zinc binding and enzymatic activity. Furthermore, we demonstrated that Zmp1 destabilizes the fibronectin network produced by human fibroblasts. Thus, by analyzing the exoproteome of C. difficile, we identified a novel extracellular metalloprotease that may be important in key steps of clostridial pathogenesis
- …