An Approach to Building a Universal Health Care Model: Morbidity Model of Degenerative Diseases

There have been many different approaches to building health care models. Because of these differences, it is sometimes difficult to relate the developed models to each other. We have therefore first defined the submodels of the health care system and clarified the relation of our approach to studies already undertaken. The submodels also show the steps in building the health care model. The first step was to construct the morbidity model of degenerative diseases. The validity of the model was tested for various countries, using statistics from the World Health Organization. The fit of the model to empirical data was satisfactory. The model was applied to an international comparison and estimation of trends in degenerative diseases. The study showed the feasibility of this type of approach in health planning

Local electronic structure rearrangements and strong anharmonicity in YH3 under pressures up to 180 GPa

The authors acknowledge the ESRF program committee (Grenoble, France) for the opportunity to perform XAFS and XRD measurements. We are grateful to Prof. Dr Marek Tkacz from the Institute of Physical Chemistry, PAS Kasprzaka 44/52, 01-224 Warsaw, Poland, for high quality YH3 samples and to Dr. José A. Flores-Livas for a fruitful discussion. A.P.M. and A.A.I. acknowledge the Russian Foundation for the Basic Research (grant No 18-02-40001_mega) for financial support. J.P., A.K., and I.P. would like to thank the support of the Latvian Council of Science project No. lzp-2018/2-0353. ISSP UL acknowledge the European Union’s Horizon 2020 Framework Programme H2020-WIDESPREAD-01-20l 6-2017-TeamingPhase2, grant agreement No. 739508, project CAMART2.The discovery of superconductivity above 250 K at high pressure in LaH10 and the prediction of overcoming the room temperature threshold for superconductivity in YH10 urge for a better understanding of hydrogen interaction mechanisms with the heavy atom sublattice in metal hydrides under high pressure at the atomic scale. Here we use locally sensitive X-ray absorption fine structure spectroscopy (XAFS) to get insight into the nature of phase transitions and the rearrangements of local electronic and crystal structure in archetypal metal hydride YH3 under pressure up to 180 GPa. The combination of the experimental methods allowed us to implement a multiscale length study of YH3: XAFS (short-range), Raman scattering (medium-range) and XRD (long-range). XANES data evidence a strong effect of hydrogen on the density of 4d yttrium states that increases with pressure and EXAFS data evidence a strong anharmonicity, manifested as yttrium atom vibrations in a double-well potential.--//--This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.Russian Foundation for the Basic Research (grant No 18-02-40001_mega); Latvian Council of Science project No. lzp-2018/2-0353; European Union’s Horizon 2020 Framework Programme H2020-WIDESPREAD-01-20l 6-2017-TeamingPhase2, grant agreement No. 739508, project CAMART2

Local electronic structure rearrangements and strong anharmonicity in YH3 under pressures up to 180 GPa

The authors acknowledge the ESRF program committee (Grenoble, France) for the opportunity to perform XAFS and XRD measurements. We are grateful to Prof. Dr Marek Tkacz from the Institute of Physical Chemistry, PAS Kasprzaka 44/52, 01-224 Warsaw, Poland, for high quality YH3 samples and to Dr. José A. Flores-Livas for a fruitful discussion. A.P.M. and A.A.I. acknowledge the Russian Foundation for the Basic Research (grant No 18-02-40001_mega) for financial support. J.P., A.K., and I.P. would like to thank the support of the Latvian Council of Science project No. lzp-2018/2-0353. ISSP UL acknowledge the European Union’s Horizon 2020 Framework Programme H2020-WIDESPREAD-01-20l 6-2017-TeamingPhase2, grant agreement No. 739508, project CAMART2.The discovery of superconductivity above 250 K at high pressure in LaH10 and the prediction of overcoming the room temperature threshold for superconductivity in YH10 urge for a better understanding of hydrogen interaction mechanisms with the heavy atom sublattice in metal hydrides under high pressure at the atomic scale. Here we use locally sensitive X-ray absorption fine structure spectroscopy (XAFS) to get insight into the nature of phase transitions and the rearrangements of local electronic and crystal structure in archetypal metal hydride YH3 under pressure up to 180 GPa. The combination of the experimental methods allowed us to implement a multiscale length study of YH3: XAFS (short-range), Raman scattering (medium-range) and XRD (long-range). XANES data evidence a strong effect of hydrogen on the density of 4d yttrium states that increases with pressure and EXAFS data evidence a strong anharmonicity, manifested as yttrium atom vibrations in a double-well potential.--//--This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.Russian Foundation for the Basic Research (grant No 18-02-40001_mega); Latvian Council of Science project No. lzp-2018/2-0353; European Union’s Horizon 2020 Framework Programme H2020-WIDESPREAD-01-20l 6-2017-TeamingPhase2, grant agreement No. 739508, project CAMART2

Phase Behavior of Aqueous Na-K-Mg-Ca-CI-NO3 Mixtures: Isopiestic Measurements and Thermodynamic Modeling

A comprehensive model has been established for calculating thermodynamic properties of multicomponent aqueous systems containing the Na{sup +}, K{sup +}, Mg{sup 2+}, Ca{sup 2+}, Cl{sup -}, and NO{sub 3}{sup -} ions. The thermodynamic framework is based on a previously developed model for mixed-solvent electrolyte solutions. The framework has been designed to reproduce the properties of salt solutions at temperatures ranging from the freezing point to 300 C and concentrations ranging from infinite dilution to the fused salt limit. The model has been parameterized using a combination of an extensive literature database and new isopiestic measurements for thirteen salt mixtures at 140 C. The measurements have been performed using Oak Ridge National Laboratory's (ORNL) previously designed gravimetric isopiestic apparatus, which makes it possible to detect solid phase precipitation. Water activities are reported for mixtures with a fixed ratio of salts as a function of the total apparent salt mole fraction. The isopiestic measurements reported here simultaneously reflect two fundamental properties of the system, i.e., the activity of water as a function of solution concentration and the occurrence of solid-liquid transitions. The thermodynamic model accurately reproduces the new isopiestic data as well as literature data for binary, ternary and higher-order subsystems. Because of its high accuracy in calculating vapor-liquid and solid-liquid equilibria, the model is suitable for studying deliquescence behavior of multicomponent salt systems

High performance emission spectrometer at Balder/MAX IV beamline

The emission spectrometer at Balder/MAX IV beamline is presented. Its unique features are described. Comparison is given with other types of curved crystals analyzers

The BALDER Beamline at the MAX IV Laboratory

X-ray absorption spectroscopy (XAS) includes well-established methods to study the local structure around the absorbing element - extended X-ray absorption fine structure (EXAFS), and the effective oxidation number or to quantitatively determine the speciation of an element in a complex matrix - X-ray absorption near-edge structure (XANES). The increased brilliance and intensities available at the new generation of synchrotron light sources makes it possible to study, in-situ and in-operando, much more dilute systems with relevance for natural systems, as well as the micro-scale variability and dynamics of chemical reactions on the millisecond time-scale. The design of the BALDER beamline at the MAX IV Laboratory 3 GeV ring has focused on a high flux of photons in a wide energy range, 2.4-40 keV, where the K-edge is covered for the elements S to La, and the L 3-edge for all elements heavier than Sb. The overall design of the beamline will allow large flexibility in energy range, beam size and data collection time. The other focus of the beamline design is the possibility to perform multi-technique analyses on samples. Development of sample environment requires focus on implementation of auxiliary methods in such a way that techniques like Fourier transform infrared (FTIR) spectroscopy, UV-Raman spectroscopy, X-ray diffraction and/or mass spectrometry can be performed simultaneously as the XAS study. It will be a flexible system where different instruments can be plugged in and out depending on the needs for the particular investigation. Many research areas will benefit from the properties of the wiggler based light source and the capabilities to perform in-situ and in-operando measurements, for example environmental and geochemical sciences, nuclear chemistry, catalysis, materials sciences, and cultural heritage