Analysis and design of defected ground structure for EMC improvement in mixed-signal transceiver modules

In this research, the return path discontinuity (RPD), located under the power amplifier (PA) substrate, of X-band transceiver module (Base), mounted on a four-layer printed circuit board (PCB), is investigated to improve the signal integrity by reducing the difference in the reference potential. This study is performed by initially employing the wirebond method, through the assessment of both numbers and sizes of bondwires by advanced design system (ADS). Six bondwires of 25 µm are added, producing an improvement of 6.82 dB for the reflection coefficient and 1.19 dB for the isolation and insertion loss. For further improvement, spiral shape defected ground structure (DGS) is implemented in the inner ground layer (layer 2) without using bond wires. The DGS simulation results illustrate an improvement of 3 dB for S11 and 0.6 dB for S12. To improve the electromagnetic compatibility (EMC), the authors propose combination and integration of both wirebond and DGS methods, called wirebond–DGS method, which results in an improvement of 11.86 dB for S11, 1.34 dB for S12 and S21, and 12.03 dB for S22. Finally, the wirebond–DGS RF module was fabricated and the measurement results exhibit an improvement of 8.07 dB for S11 and 9.39 dB for S22 in comparison with the fabricated Base module. In addition, 0.53 dB improvement for both S12 and S21 is also achieved

Association of genetic variation with systolic and diastolic blood pressure among African Americans: the Candidate Gene Association Resource study

The prevalence of hypertension in African Americans (AAs) is higher than in other US groups; yet, few have performed genome-wide association studies (GWASs) in AA. Among people of European descent, GWASs have identified genetic variants at 13 loci that are associated with blood pressure. It is unknown if these variants confer susceptibility in people of African ancestry. Here, we examined genome-wide and candidate gene associations with systolic blood pressure (SBP) and diastolic blood pressure (DBP) using the Candidate Gene Association Resource (CARe) consortium consisting of 8591 AAs. Genotypes included genome-wide single-nucleotide polymorphism (SNP) data utilizing the Affymetrix 6.0 array with imputation to 2.5 million HapMap SNPs and candidate gene SNP data utilizing a 50K cardiovascular gene-centric array (ITMAT-Broad-CARe [IBC] array). For Affymetrix data, the strongest signal for DBP was rs10474346 (P= 3.6 × 10−8) located near GPR98 and ARRDC3. For SBP, the strongest signal was rs2258119 in C21orf91 (P= 4.7 × 10−8). The top IBC association for SBP was rs2012318 (P= 6.4 × 10−6) near SLC25A42 and for DBP was rs2523586 (P= 1.3 × 10−6) near HLA-B. None of the top variants replicated in additional AA (n = 11 882) or European-American (n = 69 899) cohorts. We replicated previously reported European-American blood pressure SNPs in our AA samples (SH2B3, P= 0.009; TBX3-TBX5, P= 0.03; and CSK-ULK3, P= 0.0004). These genetic loci represent the best evidence of genetic influences on SBP and DBP in AAs to date. More broadly, this work supports that notion that blood pressure among AAs is a trait with genetic underpinnings but also with significant complexit

Association of genetic variation with systolic and diastolic blood pressure among African Americans: the Candidate Gene Association Resource study.

The prevalence of hypertension in African Americans (AAs) is higher than in other US groups; yet, few have performed genome-wide association studies (GWASs) in AA. Among people of European descent, GWASs have identified genetic variants at 13 loci that are associated with blood pressure. It is unknown if these variants confer susceptibility in people of African ancestry. Here, we examined genome-wide and candidate gene associations with systolic blood pressure (SBP) and diastolic blood pressure (DBP) using the Candidate Gene Association Resource (CARe) consortium consisting of 8591 AAs. Genotypes included genome-wide single-nucleotide polymorphism (SNP) data utilizing the Affymetrix 6.0 array with imputation to 2.5 million HapMap SNPs and candidate gene SNP data utilizing a 50K cardiovascular gene-centric array (ITMAT-Broad-CARe [IBC] array). For Affymetrix data, the strongest signal for DBP was rs10474346 (P= 3.6 × 10(-8)) located near GPR98 and ARRDC3. For SBP, the strongest signal was rs2258119 in C21orf91 (P= 4.7 × 10(-8)). The top IBC association for SBP was rs2012318 (P= 6.4 × 10(-6)) near SLC25A42 and for DBP was rs2523586 (P= 1.3 × 10(-6)) near HLA-B. None of the top variants replicated in additional AA (n = 11 882) or European-American (n = 69 899) cohorts. We replicated previously reported European-American blood pressure SNPs in our AA samples (SH2B3, P= 0.009; TBX3-TBX5, P= 0.03; and CSK-ULK3, P= 0.0004). These genetic loci represent the best evidence of genetic influences on SBP and DBP in AAs to date. More broadly, this work supports that notion that blood pressure among AAs is a trait with genetic underpinnings but also with significant complexity

Scattering properties of circular cylinders with periodical corrugations in the azimuthal direction

A multilayered mode-matching method incorporating reflection matrices is developed to study the scattering properties of conducting cylinders with periodical corrugations in the azimuthal direction. The effects of corrugation profile and filling permittivity on the radar cross section (RCS) are demonstrated

Backscattering of TE waves by periodical surface with dielectric cover

Several types of periodical surfaces are studied on their backscattering to a normally incident TE plane wave, The surfaces are perfect conductor and are covered with dielectric materials to make a flat surface due to aerodynamic consideration, The effects of frequency, surface profile shape, period-to-depth ratio, and cover permittivity are analyzed, It is observed that a saw-tooth profile can he used to reduce the backscattering at high frequencies and elliptical profiles san be used to reduce the backscattering at certain low frequencies when a cover material is filled in the grooves

Characteristic impedance of microshield lines with arbitrary shield cross section

A generalized potential-matching method incorporating reflection matrices is developed to calculate the capacitance of microshield lines with trapezoidal, circular, and V-shaped shields. Both completely shielded and half-shielded lines are analyzed. The effects of membrane thickness, strip width, and gapwidth on the characteristic impedance are studied

Wave penetration through slits on stacked thick plates

Wave penetration through slits on single and stacked metal plates of finite thickness is studied by using the Galerkin method. The limiting case of slits on infinitesimally thin plates are also formulated to compare the shielding effectiveness of metal plates with slits against incident plane waves, It is observed that the wave penetrating through slits on stacked plates with a proper separation is much less than that through a single slit on a plate with twice the thickness

Wraparound patch resonators on a composite ground plane

The effects of a laminated ground plane on the resonant frequencies of wraparound patch resonators are studied. An integral equation is formulated in terms of the surface current on the patch. The laminated ground is modelled by a transition matrix in the spectral domain. Factors analysed include substrate thickness, substrate dielectric constant and laminate conductivity. Due to ohmic losses, more power loss is incurred for certain laminate conductivities

Analysis of linear coaxial antennas

Two types of linear coaxial antennas, coaxial-colinear antennas, and slotted coaxial antennas are studied to check the possibility of using them as the base-station antenna in personal communication systems. The slot voltages and input impedance of linear coaxial antennas are obtained by using a transmission-line analysis where the radiation effect is accounted by a shunt and a serial admittance, respectively. The current distribution is obtained by solving an integral equation using the method of moments. The radiation pattern and directivity are then obtained from the current distribution and the reflection coefficient inside the coaxial cable. Factors analyzed include frequency, coaxial filling permittivity, and segment number