FORMULATION AND EVALUATION OF SUSTAINED-RELEASE PELLETS OF LORNOXICAM

Objective: The aim of the study was to develop sustained release pellets of lornoxicam using Eudragit RLPO and Eudragit RSPO to reduce the dosing frequency. Methods: The sustained release pellets of lornoxicam were prepared by extrusion–spheronization technique using Eudragit RLPO and Eudragit RSPO as release retardant polymers and microcrystalline cellulose as spheronizing agent. A 32 Full factorial design was applied to investigate the combined effect of the two independent variables i.e. concentration of Eudragit RLPO (X1) and concentration of Eudragit RSPO (X2) on the dependent variables, In vitro drug release at 1h (Y1), In vitro drug release at 4 h (Y2) and In vitro drug release at 12 h. (Y3). Results: The optimized formulation (F0) show in vitro drug release 11.24±1.21 %, 43.69±1.28 %, 82.69±1.74 % and 100.24±1.56 % at 1 h, 4 h, 12 h and 24 h respectively. Drug excipients compatibility study by FTIR showed no interaction between drug and excipients. Eudragit RLPO and Eudragit RSPO had a significant effect on in vitro drug release. Conclusion: From all parameters and experimental design evaluation, it was concluded that the drug release rate decreased with an increase the concentration of Eudragit RLPO and Eudragit RSPO. SEM Photomicrograph of pellets revealed that the surface was rough and the pellets were spherical shaped in nature. The in vitro release kinetics revealed higuchi model is followed and drug release is by anamolous diffusion

1.62 GHz Circularly Polarized Pin-Fed Notched Circular Patch Antenna

This paper studies a circular patch antenna which is fed by using a coaxial pin, which is a suitable antenna design for applications where small size is of importance. Such applications are wearable antenna designs. The main purpose of this paper is to design an antenna with wearable capabilities and adequate radiation characteristics for satellite communications and more specifically for the Iridium satellite constellation. The goals for the radiation characteristics of the antenna are the tuning of the antenna to 1.62GHz which is the Iridium's frequency, maximum boresight gain for this frequency, as well as circular polarization

Gated pipelined folding ADC based low power sensor for large-scale radiometric partial discharge monitoring

Partial discharge is a well-established metric for condition assessment of high-voltage plant equipment. Traditional techniques for partial discharge detection involve physical connection of sensors to the device under observation, limiting sensors to monitoring of individual apparatus, and therefore, limiting coverage. Wireless measurement provides an attractive low-cost alternative. The measurement of the radiometric signal propagated from a partial discharge source allows for multiple plant items to be observed by a single sensor, without any physical connection to the plant. Moreover, the implementation of a large-scale wireless sensor network for radiometric monitoring facilitates a simple approach to high voltage fault diagnostics. However, accurate measurement typically requires fast data conversion rates to ensure accurate measurement of faults. The use of high-speed conversion requires continuous high-power dissipation, degrading sensor efficiency and increasing cost and complexity. Thus, we propose a radiometric sensor which utilizes a gated, pipelined, sample-and-hold based folding analogue-todigital converter structure that only samples when a signal is received, reducing the power consumption and increasing the efficiency of the sensor. A proof of concept circuit has been developed using discrete components to evaluate the performance and power consumption of the system

Hepatic Stellate Cells and Hepatocarcinogenesis

Hepatic stellate cells (HSCs) are a significant component of the hepatocellular carcinoma (HCC) tumor microenvironment (TME). Activated HSCs transform into myofibroblast-like cells to promote fibrosis in response to liver injury or chronic inflammation, leading to cirrhosis and HCC. The hepatic TME is comprised of cellular components, including activated HSCs, tumor-associated macrophages, endothelial cells, immune cells, and non-cellular components, such as growth factors, proteolytic enzymes and their inhibitors, and other extracellular matrix (ECM) proteins. Interactions between HCC cells and their microenvironment have become topics under active investigation. These interactions within the hepatic TME have the potential to drive carcinogenesis and create challenges in generating effective therapies. Current studies reveal potential mechanisms through which activated HSCs drive hepatocarcinogenesis utilizing matricellular proteins and paracrine crosstalk within the TME. Since activated HSCs are primary secretors of ECM proteins during liver injury and inflammation, they help promote fibrogenesis, infiltrate the HCC stroma, and contribute to HCC development. In this review, we examine several recent studies revealing the roles of HSCs and their clinical implications in the development of fibrosis and cirrhosis within the hepatic TME

Hepatocellular Carcinoma-The Influence of Immunoanatomy and the Role of Immunotherapy

Hepatocellular carcinoma (HCC) is a leading cause of cancer-related morbidity and mortality worldwide. Most patients are diagnosed with advanced disease, limiting their options for treatment. While current treatments are adequate for lower staged disease, available systemic treatments are limited, with marginal benefit at best. Chimeric antigen receptor (CAR) T cell therapy, effective in treating liquid tumors such as B-cell lymphoma, presents a potentially promising treatment option for advanced HCC. However, new challenges specific to solid tumors, such as tumor immunoanatomy or the immune cell presence and position anatomically and the tumor microenvironment, need to be defined and overcome. Immunotherapy currently in use must be re-engineered and re-envisioned to treat HCC with the hopes of ushering in an answer to advanced stage solid tumor disease processes. Future therapy options must address the uniqueness of the tumors under the umbrella of HCC. This review strives to summarize HCC, its staging system, current therapy and immunotherapy medications currently being utilized or studied in the treatment of HCC with the hopes of highlighting what is being done and suggesting what needs to be done in the future to champion this therapy as an effective option

Removal of phosphate from River water using a new baffle plates electrochemical reactor

During the last 50 years, the human activities have significantly altered the natural cycle of phosphate in this planet, causing phosphate to accumulate in the freshwater ecosystems of some countries to at least 75% greater than preindustrial levels, which indicates an urgent need to develop efficient phosphate treatment methods. Therefore, the current study investigates the removal of phosphate from river water using a new electrochemical cell (PBPR). This new cell utilises perforated baffle plates as a water mixer rather than magnetic stirrers that require power to work. This study investigates the influence of key operational parameters such as initial pH (ipH), current density (Ј), inter-electrode distance (ID), detention time (t) and initial phosphate concentration (IC) on the removal efficiency, and influence of the electrocoagulation process on the morphology of the surface of electrodes. Overall, the results showed that the new reactor was efficient enough to reduce the concentration of phosphate to the permissible limits. Additionally, SEM images showed that the Al anode became rough and nonuniform due to the production of aluminium hydroxides. The main advantages of the electrocoagulation technique are: 1- The EC method does not produce secondary pollutants as it does not required chemical additives, while other traditional treatment methods required either chemical or biological additives [[1], [2], [3], [4]]. 2- It has a large treatment capacity and a relatively short treatment time in comparison with other treatment methods, such as the biological methods [1,[5], [6], [7]]. 3- The EC method produces less sludge than traditional treatment traditional chemical and biological treatment methods [8,9]. EC technology, like any other treatment method, has some drawbacks that could limit its performance. For instance, it still has a clear deficiency in the variety of reactor design, and the electrodes should be periodically replaced as they dissolve into the solution due to the oxidation process [2,10]

Clinical features of De Novo acute myeloid leukemia with concurrent DNMT3A, FLT3 and NPM1 mutations

BACKGROUND: De novo acute myeloid leukemia (AML) with concurrent DNMT3A, FLT3 and NPM1 mutations (AML(DNMT3A/FLT3/NPM1)) has been suggested to represent a unique AML subset on the basis of integrative genomic analysis, but the clinical features of such patients have not been characterized systematically. METHODS: We assessed the features of patients (n = 178) harboring mutations in DNMT3A, FLT3 and/or NPM1, including an index group of AML(DNMT3A/FLT3/NPM1) patients. RESULTS: Patients with AML(DNMT3A/FLT3/NPM1) (n = 35) were significantly younger (median, 56.0 vs. 62.0 years; p = 0.025), mostly women (65.7% vs. 46.9%; p = 0.045), and presented with a higher percentage of bone marrow blasts (p < 0.001) and normal cytogenetics (p = 0.024) in comparison to patients within other mutation groups in this study. Among patients <60 years old, those with AML(DNMT3A/FLT3/NPM1) had a shorter event-free survival (EFS) (p = 0.047). DNMT3A mutations and not FLT3 or NPM1 mutations were independently associated with overall survival (OS) (p = 0.026). Within mutation subgroups, patients with AML(DNMT3A/NPM1) had a significantly shorter OS compared to those with AML(FLT3-ITD/NPM1) (p = 0.047) suggesting that the adverse impact of DNMT3A mutations is more pronounced than that of FLT3-ITD among patients with NPM1 mutation. CONCLUSIONS: DNMT3A has a significant dominant effect on the clinical features and outcomes of de novo AML patients with concurrent DNMT3A, FLT3 and NPM1 mutations. ELECTRONIC SUPPLEMENTARY MATERIAL: The online version of this article (doi:10.1186/s13045-014-0074-4) contains supplementary material, which is available to authorized users

Peningkatan Prestasi Belajar CAD Mahasiswa Teknik Otomotif Non-Reguler FT UNY melalui Pembuatan “Pohon Kata” Perintah dalam Program AutoCAD

Penelitian ini bertujuan meningkatkan prestasi belajar mata kuliah Computer Aided Design (CAD) mahasiswa prodi Teknik Otomotif Non-Reguler yang dinyatakan dalam bentuk rerata nilai akhir semester yang berasal dari komponen nilai tugas harian, nilai ujian tengah semester dan nilai ujian akhir semester. Penelitian quasi-eksperimen ini terdiri dari tahapan penelitian diawali dengan penyusunan materi pembelajaran sejumlah pokok bahasan tertentu dalam satu job sheet (lembar kerja), dilanjutkan dengan pembuatan bantuan “Pohon Kata” perintah dalam Auto CAD kepada kelas eksperimen yang ditentukan secara random dari dua kelas peserta kuliah Auto CAD pada Semester Genap 2008/2009. Kedua kelas diamati prestasinya, baik kecepatan penyelesaiannya maupun kualitas kebenaran gambarnya. Prestasi belajar kedua kelas juga diukur melalui pemberian ujian tengah semester dan ujian akhir semester. Setelah data prestasi kedua kelas terkumpul dilanjutkan dengan analisis statistik melalui uji beda (t-test) setelah sebelumnya dilakukan uji persyaratan analisis yang ternyata dapat dipenuhi. Hasil penelitian ini disimpulkan bahwa: prestasi belajar CAD mahasiswa pada kelas yang diberi perlakuan strategi pembelajaran menggunakan “Pohon Kata” perintah dalam Program Auto CAD lebih baik dibanding prestasi belajar CAD mahasiswa pada kelas yang tidak diberi perlakuan (75,41>70,89), dengan demikian pembelajaran CAD menggunakan media “Pohon Kata” perintah dalam Program Auto CAD dapat meningkatkan prestasi belajar mahasiswa Teknik Otomotif Program Non-Reguler