Development of metal matrix composites by direct energy deposition of ‘satellited’ powders

Limited research has been undertaken investigating the material design freedoms that are granted through the use of additive manufacturing methods, especially in the development of materials specifically formulated for additive processes. In this study, a new material combination was evaluated for use with directed energy deposition methods of additive manufacturing. Here, a Ti-6Al-4 V powder is processed in combination with a much finer titanium diboride powder following a satelliting procedure. The resulting combination consists of large Ti-6Al-4 V particles encased in finer titanium diboride. Deposited composites presented exhibit TiB needles associated with increased hardness. Processing conditions were detailed which permit the deposition of the prepared feedstock onto Ti-6Al-4 V substrates. Microstructural characterisation revealed that the composite was made up of eutectic TiB precipitates dispersed in α-β Ti matrix with few partially melted Ti-6Al-4 V and TiB2 particles. Satelliting TiB2 powder onto Ti-6Al-4 V particle surfaces has significantly improved the homogeneity of composite which is characterised with randomly oriented and uniform distribution of TiB needles in the microstructure. Hardness of composites ranged between 440–480 HV. Hence, the feedstock preparation method proposed has been found to be effective and can be adapted for low cost and rapid formulation of a host of materials for processing by additive manufacture

Efficiency of the Incomplete Enumeration algorithm for Monte-Carlo simulation of linear and branched polymers

We study the efficiency of the incomplete enumeration algorithm for linear and branched polymers. There is a qualitative difference in the efficiency in these two cases. The average time to generate an independent sample of $n$ sites for large $n$ varies as $n^2$ for linear polymers, but as $exp(c n^{\alpha})$ for branched (undirected and directed) polymers, where $0<\alpha<1$. On the binary tree, our numerical studies for $n$ of order $10^4$ gives $\alpha = 0.333 \pm 0.005$. We argue that $\alpha=1/3$ exactly in this case.Comment: replaced with published versio

Franck-Condon Effect in Central Spin System

We study the quantum transitions of a central spin surrounded by a collective-spin environment. It is found that the influence of the environmental spins on the absorption spectrum of the central spin can be explained with the analog of the Franck-Condon (FC) effect in conventional electron-phonon interaction system. Here, the collective spins of the environment behave as the vibrational mode, which makes the electron to be transitioned mainly with the so-called "vertical transitions" in the conventional FC effect. The "vertical transition" for the central spin in the spin environment manifests as, the certain collective spin states of the environment is favored, which corresponds to the minimal change in the average of the total spin angular momentum.Comment: 8 pages, 8 figure

Keeping it in the family: Parental influences on young people's attitudes to police

Prior research finds young people are less satisfied with police than their older counterparts. Despite this, our understanding of youth attitudes to police is limited, as most research has focused on adult attitudes to police. This study adds to our understanding by examining the influence of parent–child dynamics on youth attitudes to police. We predict that youth attitudes to police will be influenced by their parents’ attitudes. A survey of 540 school students in South East Queensland reveals that perceived parental attitudes to police are associated with youth attitudes to police. However, this effect is partially mediated by maternal, but not paternal attachment. These findings suggest that youth attitudes to police are not simply influenced by contact with police and delinquency, but that familial context is important. Consequently, our theoretical understanding of youth attitudes to police must move beyond a focus upon police contact and delinquency

Recent Experimental Tests of Special Relativity

We review our recent Michelson-Morley (MM) and Kennedy-Thorndike (KT) experiment, which tests Lorentz invariance in the photon sector, and report first results of our ongoing atomic clock test of Lorentz invariance in the matter sector. The MM-KT experiment compares a cryogenic microwave resonator to a hydrogen maser, and has set the most stringent limit on a number of parameters in alternative theories to special relativity. We also report first results of a test of Lorentz invariance in the SME (Standard Model Extension) matter sector, using Zeeman transitions in a laser cooled Cs atomic fountain clock. We describe the experiment together with the theoretical model and analysis. Recent experimental results are presented and we give a first estimate of components of the $\tilde{c}^p$ parameters of the SME matter sector. A full analysis of systematic effects is still in progress, and will be the subject of a future publication together with our final results. If confirmed, the present limits would correspond to first ever measurements of some $\tilde{c}^p$ components, and improvements by 11 and 14 orders of magnitude on others.Comment: 29 pages. Contribution to Springer Lecture Notes, "Special Relativity - Will it survive the next 100 years ?", Proceedings, Potsdam, 200

Measurement of the Hadronic Photon Structure Function F_2^gamma at LEP2

The hadronic structure function of the photon F_2^gamma is measured as a function of Bjorken x and of the factorisation scale Q^2 using data taken by the OPAL detector at LEP. Previous OPAL measurements of the x dependence of F_2^gamma are extended to an average Q^2 of 767 GeV^2. The Q^2 evolution of F_2^gamma is studied for average Q^2 between 11.9 and 1051 GeV^2. As predicted by QCD, the data show positive scaling violations in F_2^gamma. Several parameterisations of F_2^gamma are in agreement with the measurements whereas the quark-parton model prediction fails to describe the data.Comment: 4 pages, 2 figures, to appear in the proceedings of Photon 2001, Ascona, Switzerlan

A measurement of the tau mass and the first CPT test with tau leptons

We measure the mass of the tau lepton to be 1775.1+-1.6(stat)+-1.0(syst.) MeV using tau pairs from Z0 decays. To test CPT invariance we compare the masses of the positively and negatively charged tau leptons. The relative mass difference is found to be smaller than 3.0 10^-3 at the 90% confidence level.Comment: 10 pages, 4 figures, Submitted to Phys. Letts.

Measurement of the B0 Lifetime and Oscillation Frequency using B0->D*+l-v decays

The lifetime and oscillation frequency of the B0 meson has been measured using B0->D*+l-v decays recorded on the Z0 peak with the OPAL detector at LEP. The D*+ -> D0pi+ decays were reconstructed using an inclusive technique and the production flavour of the B0 mesons was determined using a combination of tags from the rest of the event. The results t_B0 = 1.541 +- 0.028 +- 0.023 ps, Dm_d = 0.497 +- 0.024 +- 0.025 ps-1 were obtained, where in each case the first error is statistical and the second systematic.Comment: 17 pages, 4 figures, submitted to Phys. Lett.

WW Production Cross Section and W Branching Fractions in e+e- Collisions at 189 GeV

From a data sample of 183 pb^-1 recorded at a center-of-mass energy of roots = 189 GeV with the OPAL detector at LEP, 3068 W-pair candidate events are selected. Assuming Standard Model W boson decay branching fractions, the W-pair production cross section is measured to be sigmaWW = 16.30 +- 0.34(stat.) +- 0.18(syst.) pb. When combined with previous OPAL measurements, the W boson branching fraction to hadrons is determined to be 68.32 +- 0.61(stat.) +- 0.28(syst.) % assuming lepton universality. These results are consistent with Standard Model expectations.Comment: 22 pages, 5 figures, submitted to Phys. Lett.