Preparation and Characterisation of Highly Loaded Fluorescent Chitosan Nanoparticles

Chitosan (CS) nanoparticles have been developed as a versatile drug delivery system to transport drugs, genes, proteins, and peptides into target sites. Demands on fluorescent nanoparticles have increased recently due to various applications in medical and stem-cell-based researches. In this study, fluorescent CS nanoparticles were prepared by a mild method, namely, complex coacervation. Entrapment efficiency of sulforhodamine (SR101) loaded into CS nanoparticles was investigated to evaluate their capacity in incorporating fluorescent molecule. Particle size of produced fluorescent nanoparticles was in the range of 600–700 nm, and their particle size was highly dependent on the CS molecular weight as well as concentration. A high entrapment efficiency of SR101 into CS nanoparticles could also be obtained when it was dissolved in methanol. In conclusion, highly loaded fluorescent CS nanoparticles could be easily prepared using complex coacervation method and therefore can be applied in various medical researches

Storage Stabilisation of Albumin-Loaded Chitosan Nanoparticles by Lyoprotectants

Purpose: To investigate the effect of lyoprotectants on the physical and storage stability of lyophilised bovine serum albumin-loaded chitosan/dextran sulphate (BSA-loaded CS/DS) nanoparticles.Methods: BSA-loaded CS/DS nanoparticles were prepared by ionic-gelation technique. The nanoparticles were harvested by ultra-centrifugation and then various lyoprotectants at different concentrations were added to the nanoparticles prior to lyophilisation at – 40 oC for 24 h. Particle sizeand distribution as well as zeta potential of the nanoparticles were measured by dynamic light scattering method. Entrapment efficiency and BSA retained in the nanoparticles matrices were determined spectrophotometrically at ëmax of 595 nm.Results: The results indicate that 0.5 %w/v trehalose was the most effective lyoprotectant and it essentially maintained the particle size of lyophilised BSA-loaded CS/DS nanoparticles which changed slightly from 188 ± 11 nm to 174 ± 14 nm during lyophilisation. Mannitol was also as effective as trehalose at 0.1 and 1.0 % w/v in stabilising the nanoparticles. The particle size of lyophilized nanoparticles increased moderately from 188 ± 11 nm to 234 ± 12 nm and 287 ± 18 nm at 0.1 and 1.0 % w/v, respectively. In contrast, the other lyoprotectants (inulin and histidine) did not show stabilizing effects. Moreover, trehalose also reduced the degree of particle aggregation from 329 ± 16 to 836 ± 21 nm upon storage for 24 h as compared to CS/DS nanoparticles without trehalose; from 438 ± 14 to1298 ± 18 (p < 0.05). The rate of BSA leakage from the nanoparticles containing trehalose was reduced from 92 to 42 % over a 11-day storage period compared with 99 to 0 % for CS/DS nanoparticles without trehalose.Conclusion: Trehalose (0.5 % w/v) is a promising lyoprotectant for storage stabilisation of BSA-loaded CS/DS nanoparticles.Keywords: Lyoprotectant, Chitosan, Nanoparticles, Trehalose, Bovine serum albumin, Ultracentrifugatio

In Vitro

Mixed micelles of Pluronic F127 and D-α-tocopheryl polyethylene glycol 1000 succinate (TPGS) in different molar ratios (10 : 0, 7 : 3, 5 : 5, and 3 : 7) were prepared to characterize this system as nanocarriers for targeted delivery of chemotherapeutic agents. Their size, zeta potential, critical micelle concentration, drug loading content, entrapment efficiency, drug release, cytotoxicity, and stability in serum were evaluated in vitro by using doxorubicin as the model anticancer drug. The micellar sizes ranged from 25 to 35 nm. The 7 : 3 and 5 : 5 micellar combinations had lower critical micelle concentrations ( M) than the 10 : 0 combination ( M). The entrapment efficiencies of the 7 : 3, 5 : 5, and 3 : 7 micellar combinations were 72%, 88%, and 69%, respectively. Doxorubicin release was greater at acidic tumour pH than at normal physiological pH. The doxorubicin-loaded mixed micelles showed greater percent inhibition and apoptosis activity in human breast adenocarcinoma (MCF-7) and acute monocytic leukaemia (THP-1) cell lines than free doxorubicin did. The mixed micelles were also stable against aggregation and precipitation in serum. These findings suggest that Pluronic F127-TPGS mixed micelles could be used as nanocarriers for targeted anticancer-drug delivery

Development of Chitosan Nanoparticles as a Stable Drug Delivery System for Protein/siRNA

Chitosan nanoparticles (CS NPs) exhibit good physicochemical properties as drug delivery systems. The aim of this study is to determine the modulation of preparative parameters on the physical characteristics and colloidal stability of CS NPs. CS NPs were fabricated by ionic interaction with dextran sulphate (DS) prior to determination of their storage stability. The smallest CS NPs of 353 ± 23 nm with a surface charge of +56.2 ± 1.5 mV were produced when CS and DS were mixed at pH 4 and with a DS : CS mass ratio of 0.5 : 1. An entrapment efficiency of 98% was achieved when BSA/siRNA was loaded into the nanoparticles. The results also showed that particle size and surface charge of CS NPs were slightly changed up to 2 weeks when stored at 4 ∘ C. Greater particle size and surface charge were obtained with increasing the concentration of DS. In conclusion, NPs were sufficiently stable when kept at 4 ∘ C and able to carry and protect protein

Preparation, characterization and in vitro release study of BSA-loaded double-walled glucose-poly(lactideco- glycolide) microspheres

The aim of this study was to prepare a model protein, bovine serum albumin (BSA) loaded double-walled microspheres using a fast degrading glucose core, hydroxyl-terminated poly(lactide-co-glycolide) (Glu- PLGA) and a moderate-degrading carboxyl-terminated PLGA polymers to reduce the initial burst release and to eliminate the lag phase from the release profile of PLGA microspheres. The double-walled microspheres were prepared using a modified water-in-oil-in-oil-in-water (w/o/o/w) method and singlepolymer microspheres were prepared using a conventional water-in-oil-in-water (w/o/w) emulsion solvent evaporation method. The particle size, morphology, encapsulation efficiency, thermal properties, in vitro drug release and structural integrity of BSA were evaluated in this study. Double-walled microspheres prepared with Glu-PLGA and PLGA polymers with a mass ratio of 1:1 were non-porous, smooth-surfaced, and spherical in shape. A significant reduction of initial burst release was achieved for the double-walled microspheres compared to single-polymer microspheres. In addition, microspheres prepared using Glu- PLGA and PLGA polymers in a mass ratio of 1:1 exhibited continuous BSA release after the small initial burst without any lag phase. It can be concluded that the double-walled microspheres made of Glu-PLGA and PLGA polymers in a mass ratio of 1:1 can be a potential delivery system for pharmaceutical proteins

Ionizable Amphiphilic Dendrimer-Based Nanomaterials with Alkyl-Chain-Substituted Amines for Tunable siRNA Delivery to the Liver Endothelium In Vivo

A library of dendrimers was synthesized and optimized for targeted small interfering RNA (siRNA) delivery to different cell subpopulations within the liver. Using a combinatorial approach, a library of these nanoparticle-forming materials was produced wherein the free amines on multigenerational poly(amido amine) and poly(propylenimine) dendrimers were substituted with alkyl chains of increasing length, and evaluated for their ability to deliver siRNA to liver cell subpopulations. Interestingly, two lead delivery materials could be formulated in a manner to alter their tissue tropism within the liver—with formulations from the same material capable of preferentially delivering siRNA to 1) endothelial cells, 2) endothelial cells and hepatocytes, or 3) endothelial cells, hepatocytes, and tumor cells in vivo. The ability to broaden or narrow the cellular destination of siRNA within the liver may provide a useful tool to address a range of liver diseases.National Institutes of Health (U.S.) Centers of Cancer and Nanotechnology Excellence (Grant U54 CA151884)Armed Forces Institute of Regenerative Medicine (Grant W81XWH-08-2-0034)Alnylam Pharmaceuticals (Firm

Insight into the relationship between the cell culture model, cell trafficking and siRNA silencing efficiency

Despite research efforts, cell uptake processes determining siRNA silencing efficiency remain unclear. Here, we examine the relationship between in vitro cell culture models, cellular trafficking and siRNA silencing efficiency to provide a mechanistic insight on siRNA delivery system design. Model siRNA-polyplexes, based on chitosan as a ‘classical’ condensing agent, were applied to a panel of lung epithelial cell lines, H1299, A549 and Calu-3 and cell internalization levels, trafficking pathways and gene silencing assessed on exposure to pharmacological inhibitors. The data reveal striking differences in the internalization behaviour and gene silencing efficiency in the tested cell lines, despite their common lung epithelial origins. The model system’s silencing was lower where clathrin internalization pathway predominated in Calu-3, relative to silencing in H1299 cells where a non-clathrin internalization appears dominant. Increased silencing on endosomal disruption was apparent in Calu-3 cells, but absent when cellular internalization was not predominantly clathrin-mediated in A549 cells. This highlights that identifying cell trafficking pathways before incorporation of functional components to siRNA delivery systems (e.g. endosomolytic compounds) is crucial. The study hence stresses the importance of selection of appropriate cell culture model, relevant to in vivo target, to assess the gene silencing efficiency and decide which functionalities the ‘stratified siRNA silencing vector’ requires