4,780 research outputs found
Directed Explicit Model Checking with HSF-SPIN
We present the explicit state model checker HSF-SPIN which is based on the model checker SPIN and its Promela modeling language. HSF-SPIN incorporates directed search algorithms for checking safety and a large class of LTL-specified liveness properties. We start off from the A* algorithm and define heuristics to accelerate the search into the direction of a specified failure situation. Next we propose an improved nested depth-first search algorithm that exploits the structure of Promela Never-Claims. As a result of both improvements, counterexamples will be shorter and the explored part of the state space will be smaller than with classical approaches, allowing to analyze larger state spaces. We evaluate the impact of the new heuristics and algorithms on a set of protocol models, some of which are real-world industrial protocols
Nonlinear Optimal Tracking For Missile Gimbaled Seeker Using Finite-Horizon State Dependent Riccati Equation
The majority of homing guided missiles use gimbaled seekers. The equations describing seeker gimbal system are highly nonlinear. Accurate nonlinear control of the motion of the gimbaled seeker through the attached DC motors is required. In this paper, an online technique for finite-horizon nonlinear racking problems is presented. The idea of the proposed technique is the change of variables that converts the nonlinear differential Riccati equation to a linear Lyapunov differential equation. The proposed technique is effective for wide range of operating points. Simulation results for a realistic gimbaled system with different engagement scenarios are given to illustrate the effectiveness of the proposed technique
Optical vortex generation from molecular chromophore arrays
The generation of light endowed with orbital angular momentum, frequently termed optical vortex light, is commonly achieved by passing a conventional beam through suitably constructed optical elements. This Letter shows that the necessary phase structure for vortex propagation can be directly produced through the creation of twisted light from the vacuum. The mechanism is based on optical emission from a family of chromophore nanoarrays that satisfy specific geometric and symmetry constraints. Each such array can support pairs of electronically delocalized doubly degenerate excitons whose azimuthal phase progression is responsible for the helical wave front of the emitted radiation. The exciton symmetry dictates the maximum magnitude of topological charge; detailed analysis secures the conditions necessary to deliver optical vortices of arbitrary order
A review of the nonmarket strategy literature : toward a multi-theoretical integration
Two parallel strands of nonmarket strategy research have emerged that are largely in isolation. One strand examines strategic corporate social responsibility (CSR) and the other examines corporate political activity (CPA), even though there is an overlap between the social and political aspects of corporate strategies. In this paper, we review and synthesize strategic CSR and CPA research published in top-tier and specialized academic journals between 2000 and 2014. Specifically, we (a) review the literature on the link between nonmarket strategy and organizational performance; (b) identify the mechanisms through which nonmarket strategy influences organizational performance; (c) integrate and synthesize the two strands – strategic CSR and CPA – of the literature; and (d) develop a multi-theoretical framework for improving our understanding of the effects of nonmarket strategy on organizational performance. We conclude by outlining a research agenda for future theoretical and empirical studies on the impact of nonmarket strategy on organizational outcomes
Extended Kalman filter based sliding mode control of parallel-connected two five-phase PMSM drive system
This paper presents sliding mode control of sensor-less parallel-connected two five-phase permanent magnet synchronous machines (PMSMs) fed by a single five-leg inverter. For both machines, the rotor speeds and rotor positions as well as load torques are estimated by using Extended Kalman Filter (EKF) scheme. Fully decoupled control of both machines is possible via an appropriate phase transposition while connecting the stator windings parallel and employing proposed speed sensor-less method. In the resulting parallel-connected two-machine drive, the independent control of each machine in the group is achieved by controlling the stator currents and speed of each machine under vector control consideration. The effectiveness of the proposed Extended Kalman Filter in conjunction with the sliding mode control is confirmed through application of different load torques for wide speed range operation. Comparison between sliding mode control and PI control of the proposed two-motor drive is provided. The speed response shows a short rise time, an overshoot during reverse operation and settling times is 0.075 s when PI control is used. The speed response obtained by SMC is without overshoot and follows its reference and settling time is 0.028 s. Simulation results confirm that, in transient periods, sliding mode controller remarkably outperforms its counterpart PI controller. 2018 by the authors.Scopu
Effect of stress-strain conditions on physical precursors and failure stages development in rock samples
Precursory stages of failure development in large rock samples were studied and simultaneous observations of the space-time variation of several physical fields were carried out under different stress-strain states. The failure process was studied in detail. A hierarchical structure of discreet rock medium was obtained after loading. It was found that the moisture reduced the rock strength, increased the microcrack distribution and influenced the shape of the failure physical precursors. The rise in temperature up to 400 °C affected the physical precursors at the intermediate and final stages of the failure. Significant variations were detected in the acoustic and electromagnetic emissions. The coalescence criterion was slightly depending on the rock moisture and temperature effect. The possibility of identifying the precursory stage of failure at different strain conditions by means of a complex parameter derived from the convolution of physical recorded data is shown. The obtained results point out the efficiency of the laboratory modelling of seismic processe
Modelling multiscale aspects of colorectal cancer
Colorectal cancer (CRC) is responsible for nearly half a million deaths annually world-wide [11]. We present a series of mathematical models describing the dynamics of the intestinal epithelium and the kinetics of the molecular pathway most commonly mutated in CRC, the Wnt signalling network. We also discuss how we are coupling such models to build a multiscale model of normal and aberrant guts. This will enable us to combine disparate experimental and clinical data, to investigate interactions between phenomena taking place at different levels of organisation and, eventually, to test the efficacy of new drugs on the system as a whole
Some time-delay finding measures and attractor reconstruction
Topologically equivalent attractor reconstruction is one of the major issues in nonlinear analysis. This is because of the fact that the underlying dynamical model of some nonlinear phenomena may not be known and thus it is necessary to retrieve the dynamics from the data it generates. One way to achieve this is the reconstruction of the attractor. The basis of such reconstruction is the famous Taken’s embedding theorem, which asserts that an equivalent phase space trajectory,preserving the topological structures of the original phase space trajectory, can be reconstructed by using only one observation of the time series. However, in some cases topologically equivalent attractor reconstructions can also be done by using multiple observations. All these things involve the choice of suitable time-delay(s) and embedding dimension. Various measures are available to find out the suitable time-delay(s). Among them, linear auto-correlation, Average mutual information, higher dimensional mutual information are mostly used measures for the reconstruction of the attractors. Every measures have certain limitations in the sense that they are not always useful in finding suitable time-delay(s). Thus it is necessary to introduce few more nonlinear measures, which may be useful if the aforesaid measures fail to produce suitable time-delay/time-delays. In this chapter, some comparatively new nonlinear measures namely generalized auto-correlation, Cross auto-correlation and a new type of nonlinear auto-correlation of bivariate data for finding suitable time-delay(s) have been discussed. To establish their usefulness, attractors of some known dynamical systems have been reconstructed from their solution components with suitable time-delay(s) obtained by each of the measures. These attractors are then compared with their corresponding original attractor by a shape distortion parameter Sd. This shape distortion parameter actually checks how much distorted the reconstructed attractor is from its corresponding original attractor. The main objective of this chapter is to address the problem of reconstruction of a least distorted topologically equivalent attractor. The reason is that if the reconstructed attractor is least distorted from its original one, the dynamics of the system can be retrieved more accurately from it. This would help in identifying the dynamics of the corresponding system, even when the dynamical model is not known. Out of the three measures discussed in this chapter, the generalized and cross auto-correlation measures produce least distorted topologically equivalent attractor only by consideration of multiple solution components of the dynamical system. On the other hand, by using the measure—new type of nonlinear auto-correlation of bivariate data, one can reconstruct a least distorted topologically attractor from single solution component of the dynamical system. Various numerical results on Lorenz system, Neuro-dynamical system and also on two real life signals are presented to prove the effectiveness of the aforesaid three comparatively new nonlinear time-delay finding measures. Finding of suitable embedding dimension is another important issue for attractor reconstruction. However, this issue has not been highlighted in this chapter because we have restricted this discussion only to three dimensional attractor reconstruction
Influence de la morphologie tridimensionnelle sur le comportement mécanique de réfractaires électrofondus
International audiencenon disponibl
Ultrafast X-Ray Imaging of Laser-Metal Additive Manufacturing Processes
The high-speed synchrotron X-ray imaging technique was synchronized with a custom-built laser-melting setup to capture the dynamics of laser powder-bed fusion processes in situ. Various significant phenomena, including vapor-depression and melt-pool dynamics and powder-spatter ejection, were captured with high spatial and temporal resolution. Imaging frame rates of up to 10 MHz were used to capture the rapid changes in these highly dynamic phenomena. At the same time, relatively slow frame rates were employed to capture large-scale changes during the process. This experimental platform will be vital in the further understanding of laser additive manufacturing processes and will be particularly helpful in guiding efforts to reduce or eliminate microstructural defects in additively manufactured parts
- …