Improved droplet breakup models for spray applications

The current study examines the performance of two zero-dimensional (0D) aerodynamically-induced breakup models, utilized for the prediction of droplet deformation during the breakup process in the bag, multi-mode and sheet-thinning regimes. The first model investigated is an improved version of the widely used Taylor analogy breakup (TAB) model, which compared to other models has the advantage of having an analytic solution. Following, a model based on the modified Navier–Stokes (M-NS) is examined. The parameters of both models are estimated based upon published experimental data for the bag breakup regime and CFD simulations with Diesel droplets performed as part of this work for the multi-mode and sheet-thinning regimes, for which there is a scarcity of experimental data. Both models show good accuracy in the prediction of the temporal evolution of droplet deformation in the three breakup regimes, compared to the experimental data and the CFD simulations. It is found that the best performance of the two is achieved with the M-NS model. Finally, a unified secondary breakup model is presented, which incorporates various models found in the literature, i.e. TAB, non-linear TAB (NLTAB), droplet deformation and breakup (DDB) and M-NS, into one equation using adjustable coefficients, allowing to switch among the different models

Numerical investigation of the aerodynamic breakup of droplets in tandem

The present work examines the aerodynamic breakup of four liquid droplets in tandem formation at Diesel engine conditions using the Volume of Fluid (VOF) method. The examined Weber (We) numbers range from 15 up to 64 and the non-dimensional distances between the droplet centres (L/D0) vary from 1.25 up to 20. Focus is given on the breakup process of the third droplet of the row, which is regarded as a “representative chain droplet”; its development is compared against that of an isolated droplet at the same flow conditions. It is found that for small distances and depending on the We number, the obtained shapes and breakup modes between the droplets are different, with the representative chain droplet experiencing a new breakup mode in the multi-mode regime, termed as “shuttlecock”. This is characterized by an oblique peripheral stretching of the droplet caused by the acting of pressure forces at an off-centre region. Moreover, the drag coefficient and liquid surface area of the representative chain droplet are lower than the corresponding ones of the isolated droplet, while the breakup initiation time is longer and the minimum We number required for breakup (critical We) is higher; correlations are provided to quantify the effect of droplet distance on the aforementioned quantities. Generally, the droplet proximity becomes important for L/D0< 9. Finally, the predicted drag coefficient is utilised in a simplified 0-D model that is capable of estimating the temporal evolution of droplet velocity of the representative chain droplet

High-throughput screening of metal-porphyrin-like graphenes for selective capture of carbon dioxide

Nanostructured materials, such as zeolites and metal-organic frameworks, have been considered to capture CO2. However, their application has been limited largely because they exhibit poor selectivity for flue gases and low capture capacity under low pressures. We perform a high-throughput screening for selective CO2 capture from flue gases by using first principles thermodynamics. We find that elements with empty d orbitals selectively attract CO2 from gaseous mixtures under low CO2 pressures (similar to 10(-3) bar) at 300 K and release it at similar to 450 K. CO2 binding to elements involves hybridization of the metal d orbitals with the CO2 pi orbitals and CO2-transition metal complexes were observed in experiments. This result allows us to perform high-throughput screening to discover novel promising CO2 capture materials with empty d orbitals (e.g., Sc- or V-porphyrin-like graphene) and predict their capture performance under various conditions. Moreover, these findings provide physical insights into selective CO2 capture and open a new path to explore CO2 capture materialsopen

Prevalence, associated factors and outcomes of pressure injuries in adult intensive care unit patients: the DecubICUs study

Funder: European Society of Intensive Care Medicine; doi: http://dx.doi.org/10.13039/501100013347Funder: Flemish Society for Critical Care NursesAbstract: Purpose: Intensive care unit (ICU) patients are particularly susceptible to developing pressure injuries. Epidemiologic data is however unavailable. We aimed to provide an international picture of the extent of pressure injuries and factors associated with ICU-acquired pressure injuries in adult ICU patients. Methods: International 1-day point-prevalence study; follow-up for outcome assessment until hospital discharge (maximum 12 weeks). Factors associated with ICU-acquired pressure injury and hospital mortality were assessed by generalised linear mixed-effects regression analysis. Results: Data from 13,254 patients in 1117 ICUs (90 countries) revealed 6747 pressure injuries; 3997 (59.2%) were ICU-acquired. Overall prevalence was 26.6% (95% confidence interval [CI] 25.9–27.3). ICU-acquired prevalence was 16.2% (95% CI 15.6–16.8). Sacrum (37%) and heels (19.5%) were most affected. Factors independently associated with ICU-acquired pressure injuries were older age, male sex, being underweight, emergency surgery, higher Simplified Acute Physiology Score II, Braden score 3 days, comorbidities (chronic obstructive pulmonary disease, immunodeficiency), organ support (renal replacement, mechanical ventilation on ICU admission), and being in a low or lower-middle income-economy. Gradually increasing associations with mortality were identified for increasing severity of pressure injury: stage I (odds ratio [OR] 1.5; 95% CI 1.2–1.8), stage II (OR 1.6; 95% CI 1.4–1.9), and stage III or worse (OR 2.8; 95% CI 2.3–3.3). Conclusion: Pressure injuries are common in adult ICU patients. ICU-acquired pressure injuries are associated with mainly intrinsic factors and mortality. Optimal care standards, increased awareness, appropriate resource allocation, and further research into optimal prevention are pivotal to tackle this important patient safety threat

Correction to: Prevalence, associated factors and outcomes of pressure injuries in adult intensive care unit patients: the DecubICUs study

The original version of this article unfortunately contained a mistake

Prevalence, associated factors and outcomes of pressure injuries in adult intensive care unit patients: the DecubICUs study

Funder: European Society of Intensive Care Medicine; doi: http://dx.doi.org/10.13039/501100013347Funder: Flemish Society for Critical Care NursesAbstract: Purpose: Intensive care unit (ICU) patients are particularly susceptible to developing pressure injuries. Epidemiologic data is however unavailable. We aimed to provide an international picture of the extent of pressure injuries and factors associated with ICU-acquired pressure injuries in adult ICU patients. Methods: International 1-day point-prevalence study; follow-up for outcome assessment until hospital discharge (maximum 12 weeks). Factors associated with ICU-acquired pressure injury and hospital mortality were assessed by generalised linear mixed-effects regression analysis. Results: Data from 13,254 patients in 1117 ICUs (90 countries) revealed 6747 pressure injuries; 3997 (59.2%) were ICU-acquired. Overall prevalence was 26.6% (95% confidence interval [CI] 25.9–27.3). ICU-acquired prevalence was 16.2% (95% CI 15.6–16.8). Sacrum (37%) and heels (19.5%) were most affected. Factors independently associated with ICU-acquired pressure injuries were older age, male sex, being underweight, emergency surgery, higher Simplified Acute Physiology Score II, Braden score 3 days, comorbidities (chronic obstructive pulmonary disease, immunodeficiency), organ support (renal replacement, mechanical ventilation on ICU admission), and being in a low or lower-middle income-economy. Gradually increasing associations with mortality were identified for increasing severity of pressure injury: stage I (odds ratio [OR] 1.5; 95% CI 1.2–1.8), stage II (OR 1.6; 95% CI 1.4–1.9), and stage III or worse (OR 2.8; 95% CI 2.3–3.3). Conclusion: Pressure injuries are common in adult ICU patients. ICU-acquired pressure injuries are associated with mainly intrinsic factors and mortality. Optimal care standards, increased awareness, appropriate resource allocation, and further research into optimal prevention are pivotal to tackle this important patient safety threat