Photonic crystals with defect structures fabricated through a combination of holographic lithography and two-photon lithography

This paper presents the capability of direct laser writing of complex defect structures in holographically formed three-dimensional photonic crystals in dipentaerythritol penta/hexaacrylate (DPHPA) monomers mixed with photoinitiators. The three-dimensional photonic crystal template was fabricated through prism-based holographic lithography. Defect structures are fabricated through the two-photon polymerization excited by a femtosecond laser. The strengths of two optical lithographic techniques are combined with holographic lithography providing a rapid and large area microfabrication and two-photon lithography providing flexibility in fabrication of defect structures. The optical fabrication process is simplified in the negative tone DPHPA without prebake and postexposure bake as is required of SU-8 while maintaining a capability for constructing photonic structures with small features. © 2010 American Institute of Physics

Holographically formed three-dimensional Penrose-type photonic quasicrystal through a lab-made single diffractive optical element

Large-area three-dimensional Penrose-type photonic quasicrystals are fabricated through a holographic lithography method using a lab-made diffractive optical element and a single laser exposure. The diffractive optical element consists of five polymer gratings symmetrically orientated around a central opening. The fabricated Penrose-type photonic quasicrystal shows ten-fold rotational symmetry. The Laue diffraction pattern from the photonic quasi-crystal is observed to be similar to that of the traditional alloy quasi-crystal. A golden ratio of 1.618 is also observed for the radii of diffraction rings, which has not been observed before in artificial photonic quasicrystals. © 2010 Optical Society of America

Fluoxetine: a case history of its discovery and preclinical development

Introduction: Depression is a multifactorial mood disorder with a high prevalence worldwide. Until now, treatments for depression have focused on the inhibition of monoaminergic reuptake sites, which augment the bioavailability of monoamines in the CNS. Advances in drug discovery have widened the therapeutic options with the synthesis of so-called selective serotonin reuptake inhibitors (SSRIs), such as fluoxetine. Areas covered: The aim of this case history is to describe and discuss the pharmacokinetic and pharmacodynamic profiles of fluoxetine, including its acute effects and the adaptive changes induced after long-term treatment. Furthermore, the authors review the effect of fluoxetine on neuroplasticity and adult neurogenesis. In addition, the article summarises the preclinical behavioural data available on fluoxetine’s effects on depressive-like behaviour, anxiety and cognition as well as its effects on other diseases. Finally, the article describes the seminal studies validating the antidepressant effects of fluoxetine. Expert opinion: Fluoxetine is the first selective SSRI that has a recognised clinical efficacy and safety profile. Since its discovery, other molecules that mimic its mechanism of action have been developed, commencing a new age in the treatment of depression. Fluoxetine has also demonstrated utility in the treatment of other disorders for which its prescription has now been approved

Accurate masses and radii of normal stars: modern results and applications

This paper presents and discusses a critical compilation of accurate, fundamental determinations of stellar masses and radii. We have identified 95 detached binary systems containing 190 stars (94 eclipsing systems, and alpha Centauri) that satisfy our criterion that the mass and radius of both stars be known to 3% or better. To these we add interstellar reddening, effective temperature, metal abundance, rotational velocity and apsidal motion determinations when available, and we compute a number of other physical parameters, notably luminosity and distance. We discuss the use of this information for testing models of stellar evolution. The amount and quality of the data also allow us to analyse the tidal evolution of the systems in considerable depth, testing prescriptions of rotational synchronisation and orbital circularisation in greater detail than possible before. The new data also enable us to derive empirical calibrations of M and R for single (post-) main-sequence stars above 0.6 M(Sun). Simple, polynomial functions of T(eff), log g and [Fe/H] yield M and R with errors of 6% and 3%, respectively. Excellent agreement is found with independent determinations for host stars of transiting extrasolar planets, and good agreement with determinations of M and R from stellar models as constrained by trigonometric parallaxes and spectroscopic values of T(eff) and [Fe/H]. Finally, we list a set of 23 interferometric binaries with masses known to better than 3%, but without fundamental radius determinations (except alpha Aur). We discuss the prospects for improving these and other stellar parameters in the near future.Comment: 56 pages including figures and tables. To appear in The Astronomy and Astrophysics Review. Ascii versions of the tables will appear in the online version of the articl

A new insight for monitoring ungulates : density surface modelling of roe deer in a Mediterranean habitat

We would like to thank the University of Aveiro (Department of Biology) and FCT/MEC for the financial support to CESAM RU (UID/AMB/50017) through national funds and, where applicable, co-financed by the FEDER, within the PT2020 Partnership Agreement. TAM is partially funded by FCT, Fundação para a Ciência e a Tecnologia, Portugal, through the project UID/MAT/00006/2013.Ungulates are especially difficult to monitor, and population estimates are challenging to obtain; nevertheless, such information is fundamental for effective management. This is particularly important for expanding species such as roe deer (Capreolus capreolus), whose populations dramatically increased in number and geographic distribution over the last decades. In an attempt to follow population trends and assess species ecology, important methodological advances were recently achieved by combining line or point sampling with geographic information systems (GIS). In this study, we combined density surface modelling (DSM) with line transect survey to predict roe deer density in northeastern Portugal. This was based on modelling pellet group counts as a function of environmental factors while taking into account the probability of detecting pellets and conversion factors to relate pellet density to animal density. We estimated a global density of 3.01 animals/100 ha (95 % CI 0.37–3.51) with a 32.82 % CV. Roe deer densities increased with increasing distance to roads as well as with higher percentage of cover areas and decreased with increasing distance to human populations. This recently developed spatial method can be advantageous to predict density over space through the identification of key factors influencing species abundance. Furthermore, surface maps for subset areas will enable to visually depict abundance distribution of wild populations. This will enable the assessment of areas where ungulate impacts should be minimized, allowing an adaptive management through time.PostprintPeer reviewe

Evidence for distinct coastal and offshore communities of bottlenose dolphins in the north east Atlantic.

Bottlenose dolphin stock structure in the northeast Atlantic remains poorly understood. However, fine scale photo-id data have shown that populations can comprise multiple overlapping social communities. These social communities form structural elements of bottlenose dolphin (Tursiops truncatus) [corrected] populations, reflecting specific ecological and behavioural adaptations to local habitats. We investigated the social structure of bottlenose dolphins in the waters of northwest Ireland and present evidence for distinct inshore and offshore social communities. Individuals of the inshore community had a coastal distribution restricted to waters within 3 km from shore. These animals exhibited a cohesive, fission-fusion social organisation, with repeated resightings within the research area, within a larger coastal home range. The offshore community comprised one or more distinct groups, found significantly further offshore (>4 km) than the inshore animals. In addition, dorsal fin scarring patterns differed significantly between inshore and offshore communities with individuals of the offshore community having more distinctly marked dorsal fins. Specifically, almost half of the individuals in the offshore community (48%) had characteristic stereotyped damage to the tip of the dorsal fin, rarely recorded in the inshore community (7%). We propose that this characteristic is likely due to interactions with pelagic fisheries. Social segregation and scarring differences found here indicate that the distinct communities are likely to be spatially and behaviourally segregated. Together with recent genetic evidence of distinct offshore and coastal population structures, this provides evidence for bottlenose dolphin inshore/offshore community differentiation in the northeast Atlantic. We recommend that social communities should be considered as fundamental units for the management and conservation of bottlenose dolphins and their habitat specialisations

Effect of Biodiversity Changes in Disease Risk: Exploring Disease Emergence in a Plant-Virus System

The effect of biodiversity on the ability of parasites to infect their host and cause disease (i.e. disease risk) is a major question in pathology, which is central to understand the emergence of infectious diseases, and to develop strategies for their management. Two hypotheses, which can be considered as extremes of a continuum, relate biodiversity to disease risk: One states that biodiversity is positively correlated with disease risk (Amplification Effect), and the second predicts a negative correlation between biodiversity and disease risk (Dilution Effect). Which of them applies better to different host-parasite systems is still a source of debate, due to limited experimental or empirical data. This is especially the case for viral diseases of plants. To address this subject, we have monitored for three years the prevalence of several viruses, and virus-associated symptoms, in populations of wild pepper (chiltepin) under different levels of human management. For each population, we also measured the habitat species diversity, host plant genetic diversity and host plant density. Results indicate that disease and infection risk increased with the level of human management, which was associated with decreased species diversity and host genetic diversity, and with increased host plant density. Importantly, species diversity of the habitat was the primary predictor of disease risk for wild chiltepin populations. This changed in managed populations where host genetic diversity was the primary predictor. Host density was generally a poorer predictor of disease and infection risk. These results support the dilution effect hypothesis, and underline the relevance of different ecological factors in determining disease/infection risk in host plant populations under different levels of anthropic influence. These results are relevant for managing plant diseases and for establishing conservation policies for endangered plant species

Smc5/6 coordinates formation and resolution of joint molecules with chromosome morphology to ensure meiotic divisions

During meiosis, Structural Maintenance of Chromosome (SMC) complexes underpin two fundamental features of meiosis: homologous recombination and chromosome segregation. While meiotic functions of the cohesin and condensin complexes have been delineated, the role of the third SMC complex, Smc5/6, remains enigmatic. Here we identify specific, essential meiotic functions for the Smc5/6 complex in homologous recombination and the regulation of cohesin. We show that Smc5/6 is enriched at centromeres and cohesin-association sites where it regulates sister-chromatid cohesion and the timely removal of cohesin from chromosomal arms, respectively. Smc5/6 also localizes to recombination hotspots, where it promotes normal formation and resolution of a subset of joint-molecule intermediates. In this regard, Smc5/6 functions independently of the major crossover pathway defined by the MutLγ complex. Furthermore, we show that Smc5/6 is required for stable chromosomal localization of the XPF-family endonuclease, Mus81-Mms4Eme1. Our data suggest that the Smc5/6 complex is required for specific recombination and chromosomal processes throughout meiosis and that in its absence, attempts at cell division with unresolved joint molecules and residual cohesin lead to severe recombination-induced meiotic catastroph

Application of the JA-CHRODIS Integrated Multimorbidity Care Model (IMCM) to a Case Study of Diabetes and Mental Health

The Integrated Multimorbidity Care Model (IMCM), developed by the Joint Action on Chronic Diseases and Promoting Healthy Ageing across the Life Cycle (JA-CHRODIS), proposes a set of 16 multidimensional components (i.e., recommendations) to improve the care of persons with multimorbidity in Europe. This study aimed at analyzing the potential applicability of the IMCM. We followed a qualitative approach that comprised two phases: (1) The design of a case study based on empirical clinical data, which consisted of a hypothetical woman with multimorbidity, type 2 diabetes mellitus, mental health, and associated social problems, and (2) the creation of a consensus group to gather the opinions of a multidisciplinary group of experts and consider the potential applicability of the IMCM to our case study. Experts described how care should be delivered to this patient according to each model component, suggested the use of specific rating scales and tools to assess her needs in a comprehensive and regular way, and pointed our crucial health and social resources to improve her care process. Experts also highlighted patient-centered, integrated and tailored care as one of the keystones of quality healthcare. Our results suggest that the IMCM is applicable in complex patients with multimorbidity

Genome-wide association study identifies WNT7B as a novel locus for central corneal thickness in Latinos

The cornea is the outermost layer of the eye and is a vital component of focusing incoming light on the retina. Central corneal thickness (CCT) is now recognized to have a significant role in ocular health and is a risk factor for various ocular diseases, such as keratoconus and primary open angle glaucoma. Most previous genetic studies utilized European and Asian subjects to identify genetic loci associated with CCT. Minority populations, such as Latinos, may aid in identifying additional loci and improve our understanding of the genetic architecture of CCT. In this study, we conducted a genome-wide association study (GWAS) in Latinos, a traditionally understudied population in genetic research, to further identify loci contributing to CCT. Study participants were genotyped using either the Illumina OmniExpress BeadChip (~730K markers) or the Illumina Hispanic/SOL BeadChip (~2.5 million markers). All study participants were 40 years of age and older. We assessed the association between individual single nucleotide polymorphisms (SNPs) and CCT using linear regression, adjusting for age, gender and principal components of genetic ancestry. To expand genomic coverage and to interrogate additional SNPs, we imputed SNPs from the 1000 Genomes Project reference panels. We identified a novel SNP, rs10453441 (P=6.01E-09), in an intron of WNT7B that is associated with CCT. Furthermore, WNT7B is expressed in the human cornea. We also replicated 11 previously reported loci, including IBTK, RXRA-COL5A1, COL5A1, FOXO1, LRRK1 and ZNF469 (P < 1.25E-3). These findings provide further insight into the genetic architecture of CCT and illustrate that the use of minority groups in GWAS will help identify additional loci