1,253 research outputs found
Effects of protein deficiency on testosterone levels, semen quality and testicular histology in the developing male rat
The aim of the study was to evaluate the effects of protein deficiency on plasma testosterone levels, epididymal sperm characteristics and testicular histology in the developing male rat. Twenty four Wistar albino rats were used in the study and were fed with a diet variously containing 3 %, 10 % and 20 % protein. Plasma testosterone levels were significantly lower in rats fed 3 % protein when compared to rats fed 10 % and 20 % protein (P<0.05). Testicular weight in protein deficient rats (rats fed 3 % and 10 % protein) was significantly lower than that of a control group (20 % protein) (P<0.05). No sperm was present in the epididymal duct lumen, but germ cells were observed in some duct lumens in rats fed 3 % protein. Epididymal weight decreased significantly in rats fed 3 % protein compared to rats fed 10 % and 20 % protein (P<0.05). The results of this study clearly show that protein deficiency in developing male rats adversely affects gonadal endocrine function, testicular histology and spermatogenesis
High-order delayed signal cancellation-based PLL under harmonically distorted grid voltages
Quasi type-1 phase-locked loop (QT1-PLL) has become very popular in recent times for grid-connected converters owing to its simple structure and fast dynamic response. By means of the use of a half-cycle moving average filter (MAF), this PLL can completely eliminate all the nominal frequency odd-order harmonics. However, the performance deteriorates when the grid experiences frequency drift. To address this issue, high-order non-adaptive MAF with the same window length has been proposed in the literature. Although it improves the off-nominal frequency performance, the filtering induced phase-lag remains the same. To address this issue, high-order delayed signal cancellation technique is considered in this study. The proposed technique demonstrates similar filtering performance as high-order MAF, however, by using lower window length. This makes the proposed technique fast responsive with lower memory requirement compared to similar other techniques in the literature. Detailed small signal modelling and associated parameter tuning method are established to facilitate the implementation of the proposed method inside current controllers of grid-connected converters. Comparative experimental results are provided with QT1-PLL and third-order QT1-PLL (TQT1-PLL) to illustrate the suitability and performance enhancement by the proposed method. These results show that in addition to the superior filtering capability of the proposed PLL, its settling-time is less than one cycle of nominal frequency under most grid conditions. Consequently, in terms of enhancing the dynamic response of the QT1-PLL, the proposed HDSC-PLL is superior to the TQT1-PLL
Apocrine adenocarcinoma of the nipple: a case report
Apocrine adenocarcinomas are rare malignant skin adnexal tumours. Apocrine carcinoma of the nipple is extremely rare and this case to the author's knowledge is only the third reported case worldwide and the first with associated ductal carcinoma in situ elsewhere in the breast. A seventy one year old caucasian female presented to the breast clinic with a growth on her nipple which proved on histopathological analysis to be an apocrine carcinoma. Recommended treatment for apocrine carcinoma includes surgery in the form of wide local excision
Are opinion leaders also opinion seekers? A research about technological products
Fikir liderliği kavramı çok sayıda çalışmanın konusu olmasına rağmen fikir arayanlarla ilgili çalışma sayısı azdır.
Bazı ürün grupları için fikir liderlerinin aynı zamanda fikir arayan kişiler de olabileceğine yönelik araştırmalar
mevcuttur. Ancak bu konudaki çalışmalar az olmakla birlikte bulguları açısından çelişkiler göstermektedir. Bu
nedenle bu araştırmada fikir liderlerinin aynı zamanda fikir arayan olup olmadıkları teknolojik ürünler
(bilgisayar, akıllı telefon, ev elektroniği ürünleri, vb.) üzerinden ölçümlenmeye çalışılmıştır. Araştırmada kişilerin
kendilerini değerlendirecekleri anket formları kullanılmış ve toplamda geçerli 184 adet form üzerinden analizler
yürütülmüştür. Araştırmanın bulgularına göre teknolojik ürünlerde fikir lideri ve fikir arayan kişilerin örtüşme
durumu %19 olarak bulunmuştur. Ayrıca hem fikir liderliği hem de fikir arayışının yaş ve medeni duruma göre
değişmediği ancak diğer demografik veriler açısından farklılık gösterebildiği tespit edilmiştir.Opinion leadership is the subject of many studies but the numbers of the studies about opinion seekers are less. In
some product groups there are some available studies which suggest that opinion leaders are also opinion
seekers. But these studies are unfortunately inedaquate and the findings are also controversial. Therefore, this
research is aim that the proposal of opinion leaders also being opinion seekers is investigated through
technological products (computer, smartphone, house electronics, etc.). In that context self-evaluation survey
forms are used in the research and 184 valid forms are used in the analysis. According to the findings, for
technological products, only 19% of the respondents are found to be both opinion leaders and opinion seekers in a
relationship. In addition, it is found that opinion leadership and opinion seeking are not dependent on age and
marital status; but there are differences according to other demographic variables
Use of a Global Positioning System (GPS) to Manage Extensive Sheep Farming and Pasture Land
The terrestrial climate is not sufficient to produce enough food to meet the roughage needs of the animals benefiting from the pasture lands because of excessive and early grazing of those areas. Plant growth is adversely affected in pastures that are not uniformly grazed. Tracking animals using the Global Positioning System (GPS) is a very important factor in determining the uniform distribution of grazing animals in a pasture, increasing the utilization rate of the pasture, and saving costs and time. With GPS tracking systems, establishing more effective pasture-use systems by monitoring the feeding regimes of small animals, the status of feed in the pasture, and the grazing behavior of the animals would be possible. The present study aimed to investigate the use of GPS for pasture and herd management in Turkey in addition to using the traditional techniques.In the present study conducted in the village of Köseyusuflu in Yozgat Province in May 2017, 2018, and 2019, grazing benefits that were determined from the pasture containing two Akkaraman sheep herds were recorded using GPS tracking devices. The results suggested that the area covered with vegetation along the sheep’s spring grazing routes varied between 43.6 and 62.9%, the ratio of legumes in the pasture grass in the low grazing areas was between 0.50 and 4.10%, and the grass species were between 12.75 and 44.50%. We determined that the sheep in herd A traveled between 7.6 and 9.9 km, while the sheep in herd B traveled between 4.7 and 5.7 km daily, and the two herds grazed an average of between 122 and 254 daa
Spatial variability of precipitation regimes over Turkey
Turkish annual precipitation regimes are analysed to provide large-scale perspective and redefine precipitation regions. Monthly total precipitation data are employed for 107 stations (1963–2002). Precipitation regime shape (seasonality) and magnitude (size) are classified using a novel multivariate methodology. Six shape and five magnitude classes are identified, which exhibit clear spatial structure. A composite (shape and magnitude) regime classification reveals dominant controls on spatial variability of precipitation. Intra-annual timing and magnitude of precipitation is highly variable due to seasonal shifts in Polar and Subtropical zones and physiographic factors. Nonetheless, the classification methodology is shown to be a powerful tool that identifies physically-interpretable precipitation regions: (1) coastal regimes for Marmara, coastal Aegean, Mediterranean and Black Sea; (2) transitional regimes in continental Aegean and Southeast Anatolia; and (3) inland regimes across central and Eastern Anatolia. This research has practical implications for understanding water resources, which are under ever growing pressure in Turkey
AH1 Projecting The Use Of Inpatient And Emergency Department Services After The Affordable Care Act Medicaid Expansion
Thermal Analyses for Induction Sintering of Powder Metal Compacts up to Sintering Temperature
Induction sintering is developed as an alternative method to conventional sintering in order to sinter iron-based powder metal (PM) compacts. In this study, the 12 kW power and 30 kHz frequency induction-sintering machine is used for 3 wt.% copper-mixed iron. The effects of different shapes and sizes of the induction coil, and temperature differences on the PM compacts up to sintering temperature are investigated; these parameters are determined both theoretically and experimentally during induction sintering. Iron-based PM compacts are sintered at 1120°C. Induction sintering of iron-based PM compacts are simulated using a program to examine the effects of magnetic flux and temperature distribution in the sample over time. The results are compared with the experimental studies.Индукционное спекание было разработано как альтернатива обычному спеканию, чтобы спекать прессовки порошковых материалов (ПМ) на основе железа. В данной работе использована индукционная агломерационная машина мощностью 12 кВт и частотой 30 кГц для спекания смеси железа с 3 масс.% меди. Исследованы влияния различных форм и размеров индукционных катушек, разниц температур на брикеты ПМ вплоть до температуры спекания; эти параметры были исследованы как теоретически, так и экспериментально во время индукционного спекания. Брикеты ПМ на основе железа спекались при 1120°C. Индукционное спекание брикетов ПМ на основе железа также смоделировано с использованием программы, которая исследует влияние магнитного потока и распределения температуры в образце со временем. Результаты сопоставлены с результатами экспериментальных исследований.Індукційне спікання було розроблено як альтернатива звичайному спіканню, щоб спікати брикети порошкових матеріялів (ПМ) на основі заліза. В даній роботі використано індукційну аґломераційну машину потужністю у 12 кВт і частотою у 30кГц для спікання суміші заліза з 3 ваг.% міді. Досліджено впливи різних форм і розмірів індукційної шпулі, ріжниць температур на брикети ПМ аж до температури спікання; ті параметри було досліджено як теоретично, так й експериментально під час індукційного спікання. Брикети ПМ на основі заліза спікалися при 1120°C. Індукційне спікання брикетів ПМ на основі заліза також модельовано з використанням програми, яка досліджує впливи магнетного потоку та розподілу температури у зразку з часом. Результати порівняно з результатами експериментальних досліджень
- …