138 research outputs found
Material Classification with a Transfer Learning based Deep Model on an imbalanced Dataset using an epochal Deming-Cycle-Methodology
This work demonstrates that a transfer learning-based deep learning model can perform unambiguous classification based on microscopic images of material surfaces with a high degree of accuracy. A transfer learning-enhanced deep learning model was successfully used in combination with an innovative approach for eliminating noisy data based on automatic selection using pixel sum values, which was refined over different epochs to develop and evaluate an effective model for classifying microscopy images. The deep learning model evaluated achieved 91.54% accuracy with the dataset used and set new standards with the method applied. In addition, care was taken to achieve a balance between accuracy and robustness with respect to the model. Based on this scientific report, a means of identifying microscopy images could evolve to support material identification, suggesting a potential application in the domain of materials science and engineering
Freezing and melting transitions of liquids in mesopores with ink-bottle geometry
Freezing and melting behavior of nitrobenzene in mesoporous silicon with different pore size and with different porous structure have been studied using H-1 NMR cryoporometry. With the bulk phase surrounding the porous monoliths, in materials with uniform channel-like pores distinct pore-size-dependent freezing and melting transitions have been measured. These data were further used for the analysis of the fluid behavior in samples with modulated porous structure, namely linear pores with alternating cross-section. We have, in particular, considered two materials consisting of channel sections, which were separated by almost identical channel `necks' but notably differed in the respective channel diameters. In the smaller channel segments, the observed shift in the freezing temperature provides direct evidence of the relevance of a pore-blocking mechanism, i.e. of the retardation in the propagation of a solid front by the channel necks. In the channel segments with larger diameter, on the other hand, freezing is found to be initiated by homogeneous nucleation.DF
Economic viability of extracting high value metals from end of life vehicles
Electronics containing growing quantities of high value and critical metals are increasingly used in automobiles. The conventional treatment practice for end-of-life vehicles (ELV) is shredding after de-pollution and partial separation of spare parts. Despite opportunities for resource recovery, the selective separation of components containing relevant amounts of critical metals for the purpose of material recycling is not commonly implemented. This article is aimed to contribute to recycling strategies for future critical metal quantities and the role of extended material recovery from ELVs. The study examines the economic feasibility of dismantling electronic components from ELVs for high value metal recycling. The results illustrate the effects of factors as dismantling time, labour costs and logistics on the economic potential of resource recovery from ELVs. Manual dismantling is profitable for only a few components at the higher labour costs in western/northern parts of Europe and applicable material prices, including the inverter for hybrid vehicles, oxygen sensor, side assistant sensor, distance and near distance sensors. Depending on the vehicle model, labour costs and current material prices, manual dismantling can also be cost-efficient for also some other such as the heating blower, generator, starter, engine and transmission control, start/stop motor, drive control, infotainment and chassis control
Anaerobic fungal communities differ along the horse digestive tract
Anaerobic fungi are potent fibre degrading microbes in the equine hindgut, yet our understanding of their diversity and community structure is limited to date. In this preliminary work, using a clone library approach we studied the diversity of anaerobic fungi along six segments of the horse hindgut: caecum, right ventral colon (RVC), left ventral colon (LVC), left dorsal colon (LDC), right dorsal colon (RDC) and rectum. Of the 647 ITS1 clones, 61.7 % were assigned to genus level groups that are so far without any cultured representatives, and 38.0 % were assigned to the cultivated genera Neocallimastix (35.1 %), Orpinomyces (2.3 %), and Anaeromyces (0.6 %). AL1 dominated the group of uncultured anaerobic fungi, particularly in the RVC (88 %) and LDC (97 %). Sequences from the LSU clone library analysis of the LDC, however, split into two distinct phylogenetic clusters with low sequence identity to Caecomyces sp. (94–96 %) and Liebetanzomyces sp. (92 %) respectively. Sequences belonging to cultured Neocallimastix spp. dominated in LVC (81 %) and rectum (75.5 %). Quantification of anaerobic fungi showed significantly higher concentrations in RVC and RDC compared to other segments, which influenced the interpretation of the changes in anaerobic fungal diversity along the horse hindgut. These preliminary findings require further investigation.</p
Gene expansion shapes genome architecture in the human pathogen Lichtheimia corymbifera: an evolutionary genomics analysis in the ancient terrestrial mucorales (Mucoromycotina)
Lichtheimia species are the second most important cause of mucormycosis in Europe. To provide broader insights into the molecular basis of the pathogenicity-associated traits of the basal Mucorales, we report the full genome sequence of L. corymbifera and compared it to the genome of Rhizopus oryzae, the most common cause of mucormycosis worldwide. The genome assembly encompasses 33.6 MB and 12,379 protein-coding genes. This study reveals four major differences of the L. corymbifera genome to R. oryzae: (i) the presence of an highly elevated number of gene duplications which are unlike R. oryzae not due to whole genome duplication (WGD), (ii) despite the relatively high incidence of introns, alternative splicing (AS) is not frequently observed for the generation of paralogs and in response to stress, (iii) the content of repetitive elements is strikingly low (<5%), (iv) L. corymbifera is typically haploid. Novel virulence factors were identified which may be involved in the regulation of the adaptation to iron-limitation, e.g. LCor01340.1 encoding a putative siderophore transporter and LCor00410.1 involved in the siderophore metabolism. Genes encoding the transcription factors LCor08192.1 and LCor01236.1, which are similar to GATA type regulators and to calcineurin regulated CRZ1, respectively, indicating an involvement of the calcineurin pathway in the adaption to iron limitation. Genes encoding MADS-box transcription factors are elevated up to 11 copies compared to the 1–4 copies usually found in other fungi. More findings are: (i) lower content of tRNAs, but unique codons inL. corymbifera, (ii) Over 25% of the proteins are apparently specific for L. corymbifera. (iii) L. corymbifera contains only 2/3 of the proteases (known to be essential virulence factors) in comparision to R. oryzae. On the other hand, the number of secreted proteases, however, is roughly twice as high as in R. oryzae
Illicit and Counterfeit Drug Analysis by Morphologically Directed Raman Spectroscopy
Morphologically directed Raman spectroscopy (MDRS) is a novel tool for the forensic analysis of illicit and counterfeit drug samples. MDRS combines Raman microspectroscopy with automated particle imaging so that physical and chemical information about the components of a mixture sample can be obtained. Results of automated particle imaging are used to determine samples for Raman analysis. The use of MDRS for these types of samples can be employed for both forensic investigations and adjudications of cases. The method provides insight about the physical and chemical composition of the sample, as well as about manufacturing and sample history. Here, MDRS was used in four different illicit and counterfeit drug analyses: (1) examination of a multicomponent drug mixture where the results could be used for comparative source attribution, (2) the detection of low (or trace) concentration particles in a drug sample, (3) the analysis of synthetic cathinone samples (i.e., bath salts), and (4) a study of counterfeit pharmaceutical products
Notes for genera: basal clades of Fungi (including Aphelidiomycota, Basidiobolomycota, Blastocladiomycota, Calcarisporiellomycota, Caulochytriomycota, Chytridiomycota, Entomophthoromycota, Glomeromycota, Kickxellomycota, Monoblepharomycota, Mortierellomycota, Mucoromycota, Neocallimastigomycota, Olpidiomycota, Rozellomycota and Zoopagomycota)
Compared to the higher fungi (Dikarya), taxonomic and evolutionary studies on the basal clades of fungi are fewer in number. Thus, the generic boundaries and higher ranks in the basal clades of fungi are poorly known. Recent DNA based taxonomic studies have provided reliable and accurate information. It is therefore necessary to compile all available information since basal clades genera lack updated checklists or outlines. Recently, Tedersoo et al. (MycoKeys 13:1--20, 2016) accepted Aphelidiomycota and Rozellomycota in Fungal clade. Thus, we regard both these phyla as members in Kingdom Fungi. We accept 16 phyla in basal clades viz. Aphelidiomycota, Basidiobolomycota, Blastocladiomycota, Calcarisporiellomycota, Caulochytriomycota, Chytridiomycota, Entomophthoromycota, Glomeromycota, Kickxellomycota, Monoblepharomycota, Mortierellomycota, Mucoromycota, Neocallimastigomycota, Olpidiomycota, Rozellomycota and Zoopagomycota. Thus, 611 genera in 153 families, 43 orders and 18 classes are provided with details of classification, synonyms, life modes, distribution, recent literature and genomic data. Moreover, Catenariaceae Couch is proposed to be conserved, Cladochytriales Mozl.-Standr. is emended and the family Nephridiophagaceae is introduced
- …