A micro-electro-mechanical-system-based thermal shear-stress sensor with self-frequency compensation

By applying the micro-electro-mechanical-system (MEMS) fabrication technology, we developed a micro-thermal sensor to measure surface shear stress. The heat transfer from a polysilicon heater depends on the normal velocity gradient and thus provides the surface shear stress. However, the sensitivity of the shear-stress measurements in air is less than desirable due to the low heat capacity of air. A unique feature of this micro-sensor is that the heating element, a film 1 µm thick, is separated from the substrate by a vacuum cavity 2 µm thick. The vacuum cavity prevents the conduction of heat to the substrate and therefore improves the sensitivity by an order of magnitude. Owing to the low thermal inertia of the miniature sensing element, this shear-stress micro-sensor can provide instantaneous measurements of small-scale turbulence. Furthermore, MEMS technology allows us make multiple sensors on a single chip so that we can perform distributed measurements. In this study, we use multiple polysilicon sensor elements to improve the dynamic performance of the sensor itself. It is demonstrated that the frequency-response range of a constant-current sensor can be extended from the order of 100 Hz to 100 kHz

Experiments in fault tolerant software reliability

The reliability of voting was evaluated in a fault-tolerant software system for small output spaces. The effectiveness of the back-to-back testing process was investigated. Version 3.0 of the RSDIMU-ATS, a semi-automated test bed for certification testing of RSDIMU software, was prepared and distributed. Software reliability estimation methods based on non-random sampling are being studied. The investigation of existing fault-tolerance models was continued and formulation of new models was initiated

Macro aerodynamic devices controlled by micro systems

Micro-ElectroMechanical-Systems (MEMS) have emerged as a major enabling technology across the engineering disciplines. In this study, the possibility of applying MEMS to the aerodynamic field was explored. We have demonstrated that microtransducers can be used to control the motion of a delta wing in a wind tunnel and can even maneuver a scaled aircraft in flight tests. The main advantage of using micro actuators to replace the traditional control surface is the significant reduction of radar cross-sections. At a high angle of attack, a large portion of the suction loading on a delta wing is contributed by the leading edge separation vortices which originate from thin boundary layers at the leading edge. We used microactuators with a thickness comparable to that of the boundary layer in order to alter the separation process and thus achieved control of the global motion by minute perturbations

Verification of a localization criterion for several disordered media

We analytically compute a localization criterion in double scattering approximation for a set of dielectric spheres or perfectly conducting disks uniformly distributed in a spatial volume which can be either spherical or layered. For every disordered medium, we numerically investigate a localization criterion, and examine the influence of the system parameters on the wavelength localization domains.Comment: 30 pages, LateX, amstex, revtex styles, 20 figure

Electromagnetic modes of Maxwell fisheye lens

We provide an analysis of the radial structure of TE and TM modes of the Maxwell fisheye lens, by means of Maxwell equations as applied to the fisheye case. Choosing a lens of size R = 1 cm, we plot some of the modes in the infrared range.Comment: 2+6 pages in Latex, 3 figures to be found in the published referenc

Resilience governance and acceptance of climate change policy in Taiwan Special Municipalities

Resilience is a city's continual ability to resist, adapt, change, and prepare for shocks and pressures, whether of environmental, social, institutional, or economic origin, in order to preserve city operations and improve responsiveness to future shocks. The goal of this research was to see how well each aspect of resilience governance (economic, social, environmental, and institutional) predicted acceptance of climate change policy (ACCP) in a Taiwan sample. A total of 1089 employees from the Environmental Protection Agency (EPA) from six special municipalities were included in the study (Taipei, New Taipei, Taoyuan, Taichung, Tainan, Kaohsiung). The analysis discovered that for all six cities, the economic dimension of resilience governance was significantly negatively correlated with the ACCP, while the social and institutional dimensions of resilience governance were significantly positively correlated with the ACCP. Furthermore, the institutional dimension of resilience governance was the only characteristic of resilience governance that consistently predicted EPA staffers' ACCP across six Taiwanese special municipalities

A hierarchy of avalanche models on arbitrary topography

We use the non-Cartesian, topography-based equations of mass and momentum balance for gravity driven frictional flows of Luca etal. (Math. Mod. Meth. Appl. Sci. 19, 127-171 (2009)) to motivate a study on various approximations of avalanche models for single-phase granular materials. By introducing scaling approximations we develop a hierarchy of model equations which differ by degrees in shallowness, basal curvature, peculiarity of constitutive formulation (non-Newtonian viscous fluids, Savage-Hutter model) and velocity profile parametrization. An interesting result is that differences due to the constitutive behaviour are largely eliminated by scaling approximations. Emphasis is on avalanche flows; however, most equations presented here can be used in the dynamics of other thin films on arbitrary surface

Modeling Shallow Over-Saturated Mixtures on Arbitrary Rigid Topography

In this paper a system of depth-integrated equations for over-saturated debris flows on three-dimensional topography is derived. The lower layer is a saturated mixture of density preserving solid and fluid constituents, where the pore fluid is in excess, so that an upper fluid layer develops above the mixture layer. At the layer interface fluid mass exchange may exist and for this a parameterization is needed. The emphasis is on the description of the influence on the flow by the curvature of the basal surface, and not on proposing rheological models of the avalanching mass. To this end, a coordinate system fitted to the topography has been used to properly account for the geometry of the basal surface. Thus, the modeling equations have been written in terms of these coordinates, and then simplified by using (1) the depth-averaging technique and (2) ordering approximations in terms of an aspect ratio ϵ which accounts for the scale of the flowing mass. The ensuing equations have been complemented by closure relations, but any other such relations can be postulated. For a shallow two-layer debris with clean water in the upper layer, flowing on a slightly curved surface, the equilibrium free surface is shown to be horizonta

Parylene Accelerometer Utilizing Spiral Beams

This paper reports a Parylene accelerometer utilizing spiral beams. Since Parylene has intrinsic tensile stress, the resonant frequency ω_n of sensor structure is higher than that under no tensile stress. Considering the sensitivity of accelerometer is 1/ω_n^2 , the investigation of ω_n of a suspended structure supported by straight beams is carried out both theoretically and experimentally. As a result, it is proved that comparatively long beams are necessary for realizing the high sensitivity of a Parylene sensor with tensile stress. A spiral beam is effective for not only realizing a long beam in a limited space, but also realizing stress relaxation. Both Parylene accelerometer with straight beams and that with spiral beams are fabricated. Sensitivity of them is characterized, and the effectiveness of utilizing spiral beam is confirmed

The Influence of Observation Errors on Analysis Error and Forecast Skill Investigated with an Observing System Simulation Experiment

The Global Modeling and Assimilation Office (GMAO) observing system simulation experiment (OSSE) framework is used to explore the response of analysis error and forecast skill to observation quality. In an OSSE, synthetic observations may be created that have much smaller error than real observations, and precisely quantified error may be applied to these synthetic observations. Three experiments are performed in which synthetic observations with magnitudes of applied observation error that vary from zero to twice the estimated realistic error are ingested into the Goddard Earth Observing System Model (GEOS-5) with Gridpoint Statistical Interpolation (GSI) data assimilation for a one-month period representing July. The analysis increment and observation innovation are strongly impacted by observation error, with much larger variances for increased observation error. The analysis quality is degraded by increased observation error, but the change in root-mean-square error of the analysis state is small relative to the total analysis error. Surprisingly, in the 120 hour forecast increased observation error only yields a slight decline in forecast skill in the extratropics, and no discernable degradation of forecast skill in the tropics