130 research outputs found
Assessing membrane material properties from the response of giant unilamellar vesicles to electric fields
Knowledge of the material properties of membranes is crucial to understanding cell viability and physiology. A number of methods have been developed to probe membranes in vitro, utilizing the response of minimal biomimetic membrane models to an external perturbation. In this review, we focus on techniques employing giant unilamellar vesicles (GUVs), model membrane systems, often referred to as minimal artificial cells because of the potential they offer to mimick certain cellular features. When exposed to electric fields, GUV deformation, dynamic response and poration can be used to deduce properties such as bending rigidity, pore edge tension, membrane capacitance, surface shear viscosity, excess area and membrane stability. We present a succinct overview of these techniques, which require only simple instrumentation, available in many labs, as well as reasonably facile experimental implementation and analysis
Recommended from our members
Performance evaluation of rail trackbed stiffness: pre and post stabilisation
Excessive deflection of a rail in response to axle loading can lead to discomfort for passengers and increased wear of both railway structures and trains. These oscillations are often caused by poor trackbed stiffness which may be due to either soft subgrade and/or contaminated ballast. A variety of trackbed stabilisation (TBS) techniques are available to remediate soft subgrades and increase the safety of tracks within the railway network. Traditional TBS methods require track removal, which is expensive, disruptive and often inefficient maintenance works. Micro-piling, using screw piles installed between sleepers, is an innovative low disruption TBS technique. This paper investigates the performance of a soft subgrade and contaminated ballast section of rail line in the UK, before and after screw pile TBS. Pre and post remediation, a computer vision-based system was used to measure rail vertical deflections during train passages and then analysed to quantify the trackbed stiffness. Additionally, 3D finite element models are created and validated by the site measurements. The finite element models are used to simulate a range of different scenarios exploring how changes to the TBS piling layout and/or further works, such as ballast improvement could add further improvements or design efficiencies. Site measurements show TBS reduced rail deflection by 20–30%, indicating that micro-piling is an effective technique for soft subgrades. The finite element analysis revealed the efficiency of micro-piling is highly dependent on the conditions of ballast, strength of the ground at the pile toe, and the pile arrangement. When the aforementioned are optimised the rail deflection could be reduced to approximately 50% of the pre TBS condition
Branch-pipe: Improving graph skeletonization around branch points in 3D point clouds
Modern plant phenotyping requires tools that are robust to noise and missing data, while being able to efficiently process large numbers of plants. Here, we studied the skeletonization of plant architectures from 3D point clouds, which is critical for many downstream tasks, including analyses of plant shape, morphology, and branching angles. Specifically, we developed an algorithm to improve skeletonization at branch points (forks) by leveraging the geometric properties of cylinders around branch points. We tested this algorithm on a diverse set of high-resolution 3D point clouds of tomato and tobacco plants, grown in five environments and across multiple developmental timepoints. Compared to existing methods for 3D skeletonization, our method efficiently and more accurately estimated branching angles even in areas with noisy, missing, or non-uniformly sampled data. Our method is also applicable to inorganic datasets, such as scans of industrial pipes or urban scenes containing networks of complex cylindrical shapes
Quantitative insights into the cyanobacterial cell economy
© Zavřel et al. Phototrophic microorganisms are promising resources for green biotechnology. Compared to heterotrophic microorganisms, however, the cellular economy of phototrophic growth is still insufficiently understood. We provide a quantitative analysis of light-limited, light-saturated, and light-inhibited growth of the cyanobacterium Synechocystis sp. PCC 6803 using a reproducible cultivation setup. We report key physiological parameters, including growth rate, cell size, and photosynthetic activity over a wide range of light intensities. Intracellular proteins were quantified to monitor proteome allocation as a function of growth rate. Among other physiological acclimations, we identify an upregulation of the translational machinery and downregulation of light harvesting components with increasing light intensity and growth rate. The resulting growth laws are discussed in the context of a coarse-grained model of phototrophic growth and available data obtained by a comprehensive literature search. Our insights into quantitative aspects of cyanobacterial acclimations to different growth rates have implications to understand and optimize photosynthetic productivity
Performance of electrical discharge machining (EDM) with nickel added dielectric fluid
In this study, the effect of nickel powder mixed dielectric fluid on Electrical Discharge Machining (EDM) performance of mild steel has been carried out. Peak current, tool/electrode diameter and concentration of powder are the process parameters. The process performance is measured in terms of material removal rate (MRR), tool wear rate (TWR), and surface roughness (SR). The experiment has been designed using a Full Factorial in Design of Experiment (DOE) software. The research outcome is to identify the important process parameters that maximize MRR and minimize TWR and SR. The experiment has been carried out using 2 levels of current (3.5 A and 6.5 A), tool diameters (14 mm and 20 mm) and Nickel powder concentrations (0 g/l and 6 g/l). The weight of the mild steel work piece and copper electrode are measured before and after each run. Based on the results, current is the most significant parameter affecting MRR, TWR, and SR. It was also found that with added nickel powder in the dielectric fluid, the tool life is longer and surface roughness of the work piece is improved. Furthermore, it was shown that both MRR and TWR increased with the increase in tool diameter. However, SR was improved as tool diameter increased but its effect was not very significant
Antimicrobial and antioxidant properties of methanol extract, fractions and compounds from the stem bark of Entada abyssinica Stend ex A. Satabie
<p>Abstract</p> <p>Background</p> <p>The aim of this study was to evaluate the antimicrobial and antioxidant activities of the methanol extract, fractions and isolated compounds from <it>Entada abyssinica </it>stem bark, plant used traditionally against gastrointestinal infections.</p> <p>Methods</p> <p>The methanol extract of <it>E. abyssinica </it>stem bark was pre-dissolved in a mixture of methanol and water, and then partitioned between <it>n</it>-hexane, ethyl acetate and <it>n</it>-butanol. The ethyl acetate portion was fractionated by column chromatography and the structures of isolated compounds elucidated by analysis of spectroscopic data and comparison with literature data. Antimicrobial activity was assayed by broth microdilution techniques on bacteria and yeasts. The antioxidant activity was determined by DPPH radical scavenging method.</p> <p>Results</p> <p>Four known compounds [(5<it>S</it>,6<it>R</it>,8a<it>R</it>)-5-(carboxymethyl)-3,4,4a,5,6,7,8,8a-octahydro-5,6,8a-trimethylnaphthalenecarboxylic acid (<b>1</b>), methyl 3,4,5-trihydroxybenzoate (<b>2</b>), benzene-1,2,3-triol (<b>3</b>) and 2,3-dihydroxypropyltriacontanoate (<b>4</b>)] were isolated. Compared to the methanol extract, fractionation increased the antibacterial activities of the <it>n</it>-hexane and ethyl acetate fractions, while the antifungal activities increased in ethyl acetate, <it>n</it>-butanol and aqueous residue fractions. The isolated compounds were generally more active on bacteria (9.7 to 156.2 μg/ml) than yeasts (78.1 to 312.5 μg/ml). Apart from compound <b>1</b>, the three others displayed DPPH<sup>· </sup>scavenging activity (RSa), with RSa<sub>50 </sub>values of 1.45 and 1.60 μg/ml.</p> <p>Conclusion</p> <p>The results obtained from this study support the ethnomedicinal use of <it>E. abyssinica </it>in the treatment of gastrointestinal infections and the isolated compounds could be useful in the standardisation of antimicrobial phytomedicine from this plant.</p
A persistent neutrophil-associated immune signature characterizes post-COVID-19 pulmonary sequelae
Interstitial lung disease and associated fibrosis occur in a proportion of individuals who have recovered from severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infection through unknown mechanisms. We studied individuals with severe coronavirus disease 2019 (COVID-19) after recovery from acute illness. Individuals with evidence of interstitial lung changes at 3 to 6 months after recovery had an up-regulated neutrophil-associated immune signature including increased chemokines, proteases, and markers of neutrophil extracellular traps that were detectable in the blood. Similar pathways were enriched in the upper airway with a concomitant increase in antiviral type I interferon signaling. Interaction analysis of the peripheral phosphoproteome identified enriched kinases critical for neutrophil inflammatory pathways. Evaluation of these individuals at 12 months after recovery indicated that a subset of the individuals had not yet achieved full normalization of radiological and functional changes. These data provide insight into mechanisms driving development of pulmonary sequelae during and after COVID-19 and provide a rational basis for development of targeted approaches to prevent long-term complications
Recommended from our members
Differential settlement and dynamic load effects across lime treated rail transition zones
Comparison of Frequency Vaginal and Cesarean Deliveries
"nBackground: We investigated the rate of vaginal childbirth and Cesarean and its causes in maternity wards of Imam Khomeini Educational Hospital in Ahwaz the capital city of Khuzestan Province and Al- Hadi Hospital in Shoostar as a traditional city."nMethods: In this comparative descriptive study data were obtained from medical records of birth deliveries in six months (March to September) in year 2007. Data were analyzed using SPSS software."nResults: The results show a total rate of 29% Cesarean and 71% vaginal childbirth in hospitals. The rate of Cesarean in Imam and Al -Hadi Hospitals was 23% and 33%, respectively. The main cause of Cesarean in Imam and Al-Hadi Hospitals was failure of labor progression (35% and 33%, respectively). Most Cesarean s were occurred in an age range of 20-25 yr."nConclusion: Comparing with international acceptable rate (20-22%), Cesarean rate in both hospitals was high. It seems spe&shy;cial attention should be made by persons, committees or organizations in charge of community health to child birth practices in both hospitals
- …