Electrocatalysis of fuel cell reactions: Investigation of alternate electrolytes

Oxygen reduction and transport properties of the electrolyte in the phosphoric acid fuel cell are studied. The areas covered were: (1) development of a theoretical expression for the rotating ring disk electrode technique; (2) determination of the intermediate reaction rate constants for oxygen reduction on platinum in phosphoric acid electrolyte; (3) determination of oxygen reduction mechanism in trifluoreomethanesulfonic acid (TFMSA) which was considered as an alternate electrolyte for the acid fuel cells; and (4) the measurement of transport properties of the phosphoric acid electrolyte at high concentrations and temperatures

Electrocatalysis of fuel cell reactions: Investigation of alternate electrolytes

Oxygen reduction and transport properties of the electrolyte in the phosphoric acid fuel cell are studied. A theoretical expression for the rotating ring-disk electrode technique; the intermediate reaction rate constants for oxygen reduction on platinum in phosphoric acid electrolyte; oxygen reduction mechanism in trifluoromethanesulfonic acid (TFMSA), considered as an alternate electrolyte for the acid fuel cells; and transport properties of the phosphoric acid electrolyte at high concentrations and temperatures are covered

Multimedia object placement for hybrid transparent data replication

In this paper, we address present an optimal solution for the problem of multimedia object placement for hybrid transparent data replication. The performance objective is to minimize the total access cost by considering both transmission cost and transcoding cost. The performance of the proposed solution is evaluated with a set of carefully designed simulation experiments for various performance metrics over a wide range of system parameters. The simulation results show that our solution consistently and significantly outperforms comparison solutions in terms of all the performance metrics considered. © 2005 IEEE.published_or_final_versio

Multimedia object placement for hybrid transparent data replication

© 2005 IEEEIn this paper, we address present an optimal solution for the problem of multimedia object placement for hybrid transparent data replication. The performance objective is to minimize the total access cost by considering both transmission cost and transcoding cost. The performance of the proposed solution is evaluated with a set of carefully designed simulation experiments for various performance metrics over a wide range of system parameters. The simulation results show that our solution consistently and significantly outperforms comparison solutions in terms of all the performance metrics considered

Fibre from pumpkin (Cucurbita pepo L.) seeds and rinds : physico-chemical properties, antioxidant capacity and application as bakery product ingredients.

Introduction: The aims of this study were to determine the proximate composition, functional properties and antioxidant activity of pumpkin seeds and rind. Besides, the effects of dietary fibre in pumpkin seeds and rinds on bread qualities and properties were evaluated. Methods: Formulations for bread substituted with 0%, 5% and 10% pumpkin seed and rind, respectively were produced. Sensory evaluation of the prepared bread samples for such attributes as appearance, aroma, flavour, texture and overall acceptability was undertaken. The physical properties of the bread samples, including dough expansion, loaf volume, crumb colour and bread texture, were determined. Proximate analysis and determination of antioxidant activity of the bread samples were also conducted. Results: Crude fibre of the pumpkin seeds and pumpkin rinds was high at 31.48% and 14.83%, respectively. The total phenolic compound (TPC) and DPPH radical scavenging activity for the pumpkin rinds were 38.60 mg GAE/ 100 g dry weight and 69.38%, respectively, which were higher than those of pumpkin seeds. A 5% level of pumpkin rind bread gave the best overall acceptability and sensory attributes, followed by 5% pumpkin seed bread. Total dietary fibre, total phenolic compound and DPPH radical scavenging activity in breads substituted with 5% pumpkin seed and 5% pumpkin rind flour were higher than the values in control bread. Conclusion: Pumpkin seeds and rinds can be used as dietary fibre sources in bakery

Bending properties of Laminated Veneer Lumber produced from Keruing (Dipterocarpus sp.) reinforced with low density wood species

Low density wood such as Pulai (Alstonia sp.), Sesendok (Endospermum sp.) and Kekabu Hutan (Bombax sp.) have never been regarded as structural material due to their inferior strengths. Converting these timbers into Laminated Veneer Lumber (LVL) and reinforcing them with stronger timber could turn them into much sought after materials. This study discusses the effects of incorporating Keruing veneers into LVL panels made from low density wood. Laminated Veneer Lumber comprised 11-ply and 15-ply veneers fabricated by arranging Keruing veneers located at the surface and the low density woods were arranged as core. Phenol Formaldehyde (PF) resin was used as the binder. The LVLs were subjected to cyclic boil-dry test according to voluntary product Standard PS1-95: Construction and Industrial Plywood. The bending properties and percent delamination were determined according to the Japanese Agricultural Standard (JAS) for Structural LVL: 1993 before and after the cyclic boil dry treatment. Result showed through incorporating low density wood with Keruing veneers, both 11-ply and 15-ply LVL panels achieved the minimum requirements for various grades stipulated in the JAS for Structural LVL Standard: 1993. At the same panel thickness, 15-ply LVL shows a better performance compares to those of 11-ply LVL. Presence of Keruing veneers as surface layers significantly increased the strength of the LVL panels. All panels passed the delamination test stipulated on the JAS for Structural LVL: 1993. Conclusively, combining Keruing and the low density wood veneers in LVL fabrication gave greater strength and more stable material

Heat treatment of rapidly quenched Fe-6.5 wt % Si ribbon

A rapidly quenched Fe-Si Alloy containing 6 to 7 wt % is heat treated to promote and control an order-disorder reaction, thereby improving its ac core loss and exciting power at induction levels about B=1.2 T. The alloy has a substantially texture, a grain size of about 1 to 2 mm, a R2 domain size of 100 to 850 nm, a DO3 domain size of about 5 to 25 nm, an ac core loss of about 1.2 to 1.6 W/kg and an exciting power of about 15 to 46 VA/kg, the core loss and exciting power being measured at an induction level of B=1.4 T and a frequency of f=60 Hz

The intermediate evolution phase in case of truncated selection

Using methods of statistical physics, we present rigorous theoretical calculations of Eigen's quasispecies theory with the truncated fitness landscape which dramatically limits the available sequence space of a reproducing quasispecies. Depending on the mutation rates, we observe three phases, a selective one, an intermediate one with some residual order and a completely randomized phase. Our results are applicable for the general case of fitness landscape.Comment: 8 page

Sex and Gender in Medical Education, and proceedings from the 2015 Sex and Gender Education Summit

The Sex and Gender Medical Education Summit: a roadmap for curricular innovation was a collaborative initiative of the American Medical Women\u27s Association, Laura W. Bush Institute for Women’s Health, Mayo Clinic, and Society for Women\u27s Health Research (www.sgbmeducationsummit.com). It was held on October 18–19, 2015 to provide a unique venue for collaboration among nationally and internationally renowned experts in developing a roadmap for the incorporation of sex and gender based concepts into medical education curricula. The Summit engaged 148 in-person attendees for the 1 1/2-day program. Pre- and post-Summit surveys assessed the impact of the Summit, and workshop discussions provided a framework for informal consensus building. Sixty-one percent of attendees indicated that the Summit had increased their awareness of the importance of sex and gender specific medicine. Other comments indicate that the Summit had a significant impact for motivating a call to action among attendees and provided resources to initiate change in curricula within their home institutions. These educational efforts will help to ensure a sex and gender basis for delivery of health care in the future