821 research outputs found
Bacteria-laden microgels as autonomous three-dimensional environments for stem cell engineering
A one-step microfluidic system is developed in this study which enables the encapsulation of stem cells and genetically engineered non-pathogenic bacteria into a so-called three-dimensional (3D) pearl lace–like microgel of alginate with high level of monodispersity and cell viability. The alginate-based microgel constitutes living materials that control stem cell differentiation in either an autonomous or heteronomous manner. The bacteria (Lactococcus lactis) encapsulated within the construct surface display adhesion fragments (III7-10 fragment of human fibronectin) for integrin binding while secreting growth factors (recombinant human bone morphogenetic protein-2) to induce osteogenic differentiation of human bone marrow–derived mesenchymal stem cells. We concentrate on interlinked pearl lace microgels that enabled us to prototype a low-cost 3D bioprinting platform with highly tunable properties
When Langmuir is too simple: H-2 dissociation on Pd(111) at high coverage
Recent experiments of H2 adsorption on Pd(111) [T. Mitsui et al., Nature (London) 422, 705 (2003)] have questioned the classical Langmuir picture of second order adsorption kinetics at high surface coverage requiring pairs of empty sites for the dissociative chemisorption. Experiments find that at least three empty sites are needed. Through density functional theory, we find that H2 dissociation is favored on ensembles of sites that involve a Pd atom with no direct interaction with adsorbed hydrogen. Such active sites are formed by aggregation of at least 3 H-free sites revealing the complex structure of the "active sites.
Hybrid Core-Shell Scaffolds for Bone Tissue Engineering
The tissue engineering applications of coaxial electrospinning are growing due to the potential increased functionality of the fibres compared to basic electrospinning. Previous studies of core and shell scaffolds have placed the active elements in the core, however, the surface response to a biomaterial affects the subsequent behaviour, thus here hydroxyapatite (HA) was added to the shell. Coaxial electrospun polycaprolactone (PCL)-polylactic acid (PLA)/HA (core-shell) scaffolds were produced in 2D sheets using a plate collector, or 3D tubes for bone tissue engineering using a rotating needle collector. The scaffolds include high hydroxyapatite content while retaining their structural and mechanical integrity. The effect of the collector type on fibre diameter, fibre alignment and mechanical properties have been evaluated, and the impact of HA incorporation on bioactivity, BMP-2 release, cell behaviour and mechanical properties for up to 12 weeks degradation were assessed. Fibre uniformity in coaxial electrospinning depends on the relative flow rate of the core and shell solutions. Using a rotating needle collector increased fibre alignment compared to a stationary collector, without affecting fibre diameter significantly, while HA content increased fibre non-uniformity. Coaxial PCL-PLA/HA fibres exhibited significantly higher bioactivity compared to PCL-PLA scaffolds due to the surface exposure of the HA particles. Apatite formation increased with increasing SBF immersion time. Coaxial tubular scaffolds with and without HA incorporation showed gradual reductions in their mechanical properties over 12 weeks in PBS or SBF but still retained their structural integrity. Coaxial scaffolds with and without HA exhibited gradual and sustained BMP-2 release and supported MSCs proliferation and differentiation with no significant difference between the two scaffolds types. These materials therefore show potential applications as bone tissue engineering scaffolds
In-situ X-ray photoelectron spectroscopy studies of water on metals and oxides at ambient conditions
X-ray photoelectron spectroscopy (XPS) is a powerful tool for surface and interface analysis, providing the elemental composition of surfaces and the local chemical environment of adsorbed species. Conventional XPS experiments have been limited to ultrahigh vacuum (UHV) conditions due to a short mean free path of electrons in a gas phase. The recent advances in instrumentation coupled with third-generation synchrotron radiation sources enables in-situ XPS measurements at pressures above 5 Torr. In this review, we describe the basic design of the ambient pressure XPS setup that combines differential pumping with an electrostatic focusing. We present examples of the application of in-situ XPS to studies of water adsorption on the surface of metals and oxides including Cu(110), Cu(111), TiO2(110) under environmental conditions of water vapor pressure. On all these surfaces we observe a general trend where hydroxyl groups form first, followed by molecular water adsorption. The importance of surface OH groups and their hydrogen bonding to water molecules in water adsorption on surfaces is discussed in detail
Resistive jet simulations extending radially self-similar magnetohydrodynamic models
Numerical simulations with self-similar initial and boundary conditions
provide a link between theoretical and numerical investigations of jet
dynamics. We perform axisymmetric resistive magnetohydrodynamic (MHD)
simulations for a generalised solution of the Blandford & Payne type, and
compare them with the corresponding analytical and numerical ideal-MHD
solutions. We disentangle the effects of the numerical and physical
diffusivity. The latter could occur in outflows above an accretion disk, being
transferred from the underlying disk into the disk corona by MHD turbulence
(anomalous turbulent diffusivity), or as a result of ambipolar diffusion in
partially ionized flows. We conclude that while the classical magnetic Reynolds
number measures the importance of resistive effects in the
induction equation, a new introduced number, \rbeta=(\beta/2)R_{\rm m} with
the plasma beta, measures the importance of the resistive effects in
the energy equation. Thus, in magnetised jets with , when \rbeta \la
1 resistive effects are non-negligible and affect mostly the energy equation.
The presented simulations indeed show that for a range of magnetic
diffusivities corresponding to \rbeta \ga 1 the flow remains close to the
ideal-MHD self-similar solution.Comment: Accepted for publication in MNRA
Improved behavioral analysis of fuzzy cognitive map models
Fuzzy Cognitive Maps (FCMs) are widely applied for describing the major components of complex systems and their interconnections. The popularity of FCMs is mostly based on their simple system representation, easy model creation and usage, and its decision support capabilities. The preferable way of model construction is based on historical, measured data of the investigated system and a suitable learning technique. Such data are not always available, however. In these cases experts have to define the strength and direction of causal connections among the components of the system, and their decisions are unavoidably affected by more or less subjective elements. Unfortunately, even a small change in the estimated strength may lead to significantly different simulation outcome, which could pose significant decision risks. Therefore, the preliminary exploration of model ‘sensitivity’ to subtle weight modifications is very important to decision makers. This way their attention can be attracted to possible problems. This paper deals with the advanced version of a behavioral analysis. Based on the experiences of the authors, their method is further improved to generate more life-like, slightly modified model versions based on the original one suggested by experts. The details of the method is described, its application and the results are presented by an example of a banking application. The combination of Pareto-fronts and Bacterial Evolutionary Algorithm is a novelty of the approach. © Springer International Publishing AG, part of Springer Nature 2018.Peer reviewe
The structure of mixed H2O-OH monolayer films on Ru(0001)
Scanning tunneling microscopy (STM) and x-ray absorption spectroscopy (XAS) have been used to study the structures produced by water on Ru(0001) at temperatures above 140 K. It was found that while undissociated water layers are metastable below 140 K, heating above this temperature produces drastic transformations whereby a fraction of the water molecules partially dissociate and form mixed H{sub 2}O-OH structures. XPS and XAS revealed the presence of hydroxyl groups with their O-H bond essentially parallel to the surface. STM images show that the mixed H{sub 2}O-OH structures consist of long narrow stripes aligned with the three crystallographic directions perpendicular to the close-packed atomic rows of the Ru(0001) substrate. The internal structure of the stripes is a honeycomb network of H-bonded water and hydroxyl species. We found that the metastable low temperature molecular phase can also be converted to a mixed H{sub 2}O-OH phase through excitation by the tunneling electrons when their energy is 0.5 eV or higher above the Fermi level. Structural models based on the STM images were used for Density Functional Theory optimizations of the stripe geometry. The optimized geometry was then utilized to calculate STM images for comparison with the experiment
Recommended from our members
Chemical reactions of water molecules on Ru(0001) induced by selective excitation of vibrational modes
Tunneling electrons in a scanning tunneling microscope were used to excite specific vibrational quantum states of adsorbed water and hydroxyl molecules on a Ru(0 0 0 1) surface. The excited molecules relaxed by transfer of energy to lower energy modes, resulting in diffusion, dissociation, desorption, and surface-tip transfer processes. Diffusion of H{sub 2}O molecules could be induced by excitation of the O-H stretch vibration mode at 445 meV. Isolated molecules required excitation of one single quantum while molecules bonded to a C atom required at least two quanta. Dissociation of single H{sub 2}O molecules into H and OH required electron energies of 1 eV or higher while dissociation of OH required at least 2 eV electrons. In contrast, water molecules forming part of a cluster could be dissociated with electron energies of 0.5 eV
Metabolic effects of diets differing in glycaemic index depend on age and endogenous GIP
Aims/hypothesis
High- vs low-glycaemic index (GI) diets unfavourably affect body fat mass and metabolic markers in rodents. Different effects of these diets could be age-dependent, as well as mediated, in part, by carbohydrate-induced stimulation of glucose-dependent insulinotrophic polypeptide (GIP) signalling.
Methods
Young-adult (16 weeks) and aged (44 weeks) male wild-type (C57BL/6J) and GIP-receptor knockout (Gipr −/− ) mice were exposed to otherwise identical high-carbohydrate diets differing only in GI (20–26 weeks of intervention, n = 8–10 per group). Diet-induced changes in body fat distribution, liver fat, locomotor activity, markers of insulin sensitivity and substrate oxidation were investigated, as well as changes in the gene expression of anorexigenic and orexigenic hypothalamic factors related to food intake.
Results
Body weight significantly increased in young-adult high- vs low-GI fed mice (two-way ANOVA, p < 0.001), regardless of the Gipr genotype. The high-GI diet in young-adult mice also led to significantly increased fat mass and changes in metabolic markers that indicate reduced insulin sensitivity. Even though body fat mass also slightly increased in high- vs low-GI fed aged wild-type mice (p < 0.05), there were no significant changes in body weight and estimated insulin sensitivity in these animals. However, aged Gipr −/− vs wild-type mice on high-GI diet showed significantly lower cumulative net energy intake, increased locomotor activity and improved markers of insulin sensitivity.
Conclusions/interpretation
The metabolic benefits of a low-GI diet appear to be more pronounced in younger animals, regardless of the Gipr genotype. Inactivation of GIP signalling in aged animals on a high-GI diet, however, could be beneficial
- …