Gallium Desorption Behavior At AlGaAs/GaAs Heterointerfaces During High-temperature Molecular Beam Epitaxy

A Monte Carlo simulation study is performed to investigate the Ga desorption behavior during AlGaAs-on-GaAs heterointerface formation by molecular beam epitaxy. The transients in the Ga desorption rate upon opening the Al shutter are shown to be associated with the concurrent reduction in the V/III flux ratio. Monte Carlo simulations employing a constant V/III flux ratio yield a “steplike” variation in the Ga desorption rate with the resulting interfaces closer in abruptness to the ideal AlGaAs-on-GaAs interface. Further details on the stoichiometry of the interface and its relationship with predicted Ga desorption profiles is presented

Two-Dimensional Digitized Picture Arrays and Parikh Matrices

Parikh matrix mapping or Parikh matrix of a word has been introduced in the literature to count the scattered subwords in the word. Several properties of a Parikh matrix have been extensively investigated. A picture array is a two-dimensional connected digitized rectangular array consisting of a finite number of pixels with each pixel in a cell having a label from a finite alphabet. Here we extend the notion of Parikh matrix of a word to a picture array and associate with it two kinds of Parikh matrices, called row Parikh matrix and column Parikh matrix. Two picture arrays A and B are defined to be M-equivalent if their row Parikh matrices are the same and their column Parikh matrices are the same. This enables to extend the notion of M-ambiguity to a picture array. In the binary and ternary cases, conditions that ensure M-ambiguity are then obtained

PERFORMANCE ANALYSIS OF SOLAR WATER HEATER INTEGRATED WITH SODIUM ACETATE TRIHYDRATE AS PHASE CHANGE MATERIAL

The Solar Water Heater (SWH) has an important place among solar heating collectors due to the fact that construction of the water heater requires less material than others. The Solar water heater may be used for space heating and drying. The main objectives of this paper are to increase the efficiency of flat plate collector solar water heater. The efficiency of Solar Water Heater is increased with decreasing, the thermal losses. To overcome the high thermal losses due to conduction, convection and radiation in the flat plate collector, PCM materials are used. To improve the efficiency of the flat plate collector, it is integrated with the Sodium Acetate Trihydrate as PCM. To enhance the heating rate of the solar water heater, the PCM is integrated and stored directly in flat plate collector. The performance of the flat plate collector is measured with and without using PCM. The Experimental result were taken for the area of 0.42 m2. The efficiency of the flat plate collector is increased up to 5 to 7% while compared to with and without using PCM

The Sasa-Satsuma higher order nonlinear Schrodinger equation and its bilinearization and multi-soliton solutions

Higher order and multicomponent generalizations of the nonlinear Schrodinger equation are important in various applications, e.g., in optics. One of these equations, the integrable Sasa-Satsuma equation, has particularly interesting soliton solutions. Unfortunately the construction of multi-soliton solutions to this equation presents difficulties due to its complicated bilinearization. We discuss briefly some previous attempts and then give the correct bilinearization based on the interpretation of the Sasa-Satsuma equation as a reduction of the three-component Kadomtsev-Petvishvili hierarchy. In the process we also get bilinearizations and multi-soliton formulae for a two component generalization of the Sasa-Satsuma equation (the Yajima-Oikawa-Tasgal-Potasek model), and for a (2+1)-dimensional generalization.Comment: 13 pages in RevTex, added reference

Breeding Cultivars for Heat Stress Tolerance in Staple Food Crops

Food and nutritional security will be worsened by climate change-induced high temperatures, droughts and reduced water availability in most agricultural food crops environments, particularly in developing countries. Recent evidences indicate that countries in the southern hemisphere are more vulnerable to food production due to greater frequency of extreme weather events. These challenges can be addressed by: (i) adoption of climate mitigation tools in agricultural and urban activities; (ii) development of heat and drought tolerant cultivars in major food crops; (iii) bringing back forgotten native minor food crops such as millets and root crops; and (iv) continued investment in agricultural research and development with the strong government policy support on native crops grown by small holder farmers. The native crops have inherent potential and traits to cope with adverse climate during the course of its evolution process. Therefore, diversifying the crops should be a prime framework of the climate-smart agriculture to meet the global food and nutritional security for which policy-driven production changes are highly required in developing countries. The adverse effects of climate change on agricultural production need to be addressed by multidisciplinary team and approaches through strong network of research consortium including private sectors and multinational governments for global impact

Structure of turbulent non-premixed flames modeled with two-step chemistry

Direct numerical simulations of turbulent diffusion flames modeled with finite-rate, two-step chemistry, A + B yields I, A + I yields P, were carried out. A detailed analysis of the turbulent flame structure reveals the complex nature of the penetration of various reactive species across two reaction zones in mixture fraction space. Due to this two zone structure, these flames were found to be robust, resisting extinction over the parameter ranges investigated. As in single-step computations, mixture fraction dissipation rate and the mixture fraction were found to be statistically correlated. Simulations involving unequal molecular diffusivities suggest that the small scale mixing process and, hence, the turbulent flame structure is sensitive to the Schmidt number

Effect of finite-rate chemistry and unequal Schmidt numbers on turbulent non-premixed flames modeled with single-step chemistry

The interaction between a quasi-laminar flame and a turbulent flowfield is investigated through direct numerical simulations (DNS) of reacting flow in two- and three-dimensional domains. Effects due to finite-rate chemistry are studied using a single step global reaction A (fuel) + B (oxidizer) yields P (product), and by varying a global Damkoehler number, as a result of which the turbulence-chemistry interaction in the flame is found to generate a wide variety of conditions, ranging from near-equilibrium to near-extinction. Differential diffusion effects are studied by changing the Schmidt number of one reactive species to one-half. It is observed that laminar flamelet response is followed within the turbulent flowfield, except in regions where transient effects seem to dominate

Co-Axial Gyro-Spinning of PCL/PVA/HA Core-Sheath Fibrous Scaffolds for Bone Tissue Engineering

The present study aspires towards fabricating core-sheath fibrous scaffolds by state-of-the-art pressurized gyration for bone tissue engineering applications. The core-sheath fibers comprising dual-phase poly-ε-caprolactone (PCL) core and polyvinyl alcohol (PVA) sheath are fabricated using a novel "co-axial" pressurized gyration method. Hydroxyapatite (HA) nanocrystals are embedded in the sheath of the fabricated scaffolds to improve the performance for application as a bone tissue regeneration material. The diameter of the fabricated fiber is 3.97 ± 1.31 µm for PCL-PVA/3%HA while pure PCL-PVA with no HA loading gives 3.03 ± 0.45 µm. Bead-free fiber morphology is ascertained for all sample groups. The chemistry, water contact angle and swelling behavior measurements of the fabricated core-sheath fibrous scaffolds indicate the suitability of the structures in cellular activities. Saos-2 bone osteosarcoma cells are employed to determine the biocompatibility of the scaffolds, wherein none of the scaffolds possess any cytotoxicity effect, while cell proliferation of 94% is obtained for PCL-PVA/5%HA fibers. The alkaline phosphatase activity results suggest the osteogenic activities on the scaffolds begin earlier than day 7. Overall, adaptations of co-axial pressurized gyration provides the flexibility to embed or encapsulate bioactive substances in core-sheath fiber assemblies and is a promising strategy for bone healing

Gyrospun antimicrobial nanoparticle loaded fibrous polymeric filters

© 2016 The Authors. Published by Elsevier B.V. © 2016 The Authors. Published by Elsevier B.V. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).A one step approach to prepare hybrid nanoparticle embedded polymer fibres using pressurised gyration is presented. Two types of novel antimicrobial nanoparticles and poly (methylmethacrylate) polymer were used in this work. X-ray diffraction analysis of the nanoparticles revealed Ag, Cu and W are the main elements present in them. The concentration of the polymer solution and the nanoparticle concentration had a significant influence on the fibre diameter, pore size and morphology. Fibres with a diameter in the range of 6-20 ìm were spun using 20 wt% polymer solutions containing 0.1, 0.25 and 0.5 w% nanoparticles under 0.3 MPa working pressure and a rotational speed of 36000 rpm. Continuous, bead-free fibre morphologies were obtained for each case. The pore size in the fibres varied between 36-300 nm. Successful incorporation of the nanoparticles in polymer fibres was confirmed by energy dispersive x-ray analysis. The fibres were also gyrospun on to metallic disks to prepare filters which were tested for their antibacterial activity on a suspension of Pseudomonas aeruginosa. Nanoparticle loaded fibres showed higher antibacterial efficacy than pure poly(methylmethacrylate) fibres.8pÍuPeer reviewedFinal Published versio