1,212 research outputs found
Dynamic Responses of Female Volunteers in Rear Impact Sled Tests at Two Head Restraint Distances
The objective of this study was to assess the biomechanical and kinematic responses of female volunteers with two different head restraint (HR) configurations when exposed to a low-speed rear loading environment. A series of rear impact sled tests comprising eight belted, near 50th percentile female volunteers, seated on a simplified laboratory seat, was performed with a mean sled acceleration of 2.1 g and a velocity change of 6.8 km/h. Each volunteer underwent two tests; the first test configuration, HR10, was performed at the initial HR distance ∼10 cm and the second test configuration, HR15, was performed at ∼15 cm. Time histories, peak values and their timing were derived from accelerometer data and video analysis, and response corridors were also generated. The results were separated into three different categories, HR10C (N = 8), HR15C (N = 6), and HR15NC (N= 2), based on: (1) the targeted initial HR distance [10 cm or 15 cm] and (2) whether the volunteers’ head had made contact with the HR [Contact (C) or No Contact (NC)] during the test event. The results in the three categories deviated significantly. The greatest differences were found for the average peak head angular displacements, ranging from 10\ub0 to 64\ub0. Furthermore, the average neck injury criteria (NIC) value was 22% lower in HR10C (3.9 m2/s2), and 49% greater in HR15NC (7.4 m2/s2) in comparison to HR15C (5.0 m2/s2). This study supplies new data suitable for validation of mechanical or mathematical models of a 50th percentile female. A model of a 50th percentile female remains to be developed and is urgently required to complement the average male models to enhance equality in safety assessments. Hence, it is important that future protection systems are developed and evaluated with female properties taken into consideration too. It is likely that the HR15 test configuration is close to the limit for avoiding HR contact for this specific seat setup. Using both datasets (HR15C and HR15NC), each with its corresponding HR contact condition, will be possible in future dummy or model evaluation
Co-firing of biomass and other wastes in fluidised bed systems
A project on co-firing in large-scale power plants burning coal is currently funded by the European Commission. It is called COPOWER. The project involves 10 organisations from 6 countries. The project involves combustion studies over the full spectrum of equipment size, ranging from small laboratory-scale reactors and pilot plants, to investigate fundamentals and operating parameters, to proving trials on a commercial power plant in Duisburg. The power plant
uses a circulating fluidized bed boiler. The results to be obtained are to be compared as function of scale-up. There are two different coals, 3 types of biomass and 2 kinds of waste materials are to be used for blending with coal for co-firing tests. The baseline values are obtained during a campaign of one month at the power station and the results are used for comparison with those to be obtained in other units of various sizes. Future tests will be implemented with the objective to achieve improvement on baseline values. The fuels to be used are already characterized. There are ongoing studies to determine reactivities of fuels and chars produced from the fuels. Reactivities are determined not only for individual fuels but also for blends to be used. Presently pilot-scale combustion tests are also undertaken to study the effect of blending coal with different types of biomass and waste materials. The potential for synergy to improve combustion is investigated. Early results will be reported in the Conference. Simultaneously, studies to verify the availability of biomass and waste materials in Portugal, Turkey and Italy have been undertaken. Techno-economic barriers for the future use of biomass and other waste materials are identified. The potential of using these materials in coal fired power stations has been assessed. The conclusions will also be reported
Producing Enactable Protocols in Artificial Agent Societies
This paper draws upon our previous work [7, 16] in which we proposed the organisation of services around the concept of artificial agent societies and presented a framework for representing roles and protocols using LTSs. The agent would apply for a role in the society, which would result in its participation in a number of protocols. We advocated the use of the games-based metaphor for describing the protocols and presented a framework for assessing the admission of the agent to the society on the basis of its competence. In this work we look at the subsequent question: what information should the agent receive upon entry?. We can not provide it with the full protocol because of security and overload issues. Therefore, we choose to only provide the actions pertinent to the protocols that the role the agent applied for participates in the society. We employ branching bisimulation for producing a protocol equivalent to the original one with all actions not involving the role translated into silent (τ) actions. However, this approach sometimes results in non-enactable protocols. In this case, we need to repair the protocol by adding the role in question as a recipient to certain protocol messages that were causing the problems. We present three different approaches for repairing protocols, depending on the number of messages from the original protocol they modify. The modified protocol is adopted as the final one and the agent is given the role automaton that is derived from the branching bisimulation process
Mitigating theoretical and coverage biases in the design of theory-building research: an example from international entrepreneurship
Shape modeling technique KOALA validated by ESA Rosetta at (21) Lutetia
We present a comparison of our results from ground-based observations of
asteroid (21) Lutetia with imaging data acquired during the flyby of the
asteroid by the ESA Rosetta mission. This flyby provided a unique opportunity
to evaluate and calibrate our method of determination of size, 3-D shape, and
spin of an asteroid from ground-based observations. We present our 3-D
shape-modeling technique KOALA which is based on multi-dataset inversion. We
compare the results we obtained with KOALA, prior to the flyby, on asteroid
(21) Lutetia with the high-spatial resolution images of the asteroid taken with
the OSIRIS camera on-board the ESA Rosetta spacecraft, during its encounter
with Lutetia. The spin axis determined with KOALA was found to be accurate to
within two degrees, while the KOALA diameter determinations were within 2% of
the Rosetta-derived values. The 3-D shape of the KOALA model is also confirmed
by the spectacular visual agreement between both 3-D shape models (KOALA pre-
and OSIRIS post-flyby). We found a typical deviation of only 2 km at local
scales between the profiles from KOALA predictions and OSIRIS images, resulting
in a volume uncertainty provided by KOALA better than 10%. Radiometric
techniques for the interpretation of thermal infrared data also benefit greatly
from the KOALA shape model: the absolute size and geometric albedo can be
derived with high accuracy, and thermal properties, for example the thermal
inertia, can be determined unambiguously. We consider this to be a validation
of the KOALA method. Because space exploration will remain limited to only a
few objects, KOALA stands as a powerful technique to study a much larger set of
small bodies using Earth-based observations.Comment: 15 pages, 8 figures, 2 tables, accepted for publication in P&S
Photometric observations of distant active comets
We present CCD VR_C observations of 6 distant comets located at heliocentric
distances of 3.4--7.2 AU. Time-series data were obtained on three nights in
July, 2000 covering 16 hours. Each comet was observed after the perihelion,
when a lower activity was expected. Contrary to expectation, we found
well-defined circular comae and extended tails visible out to a few (3-5)
arcminutes. We detected a quasi-cyclic light variation of C/1999 J2, while
C/1999 N4 showed some hints of a more complex variation. C/2000 K1 was constant
to +/-0.04 mag during the observing run. The standard V and R_C data were used
to estimate nuclear diameters, while the colour indices implied a slighly
reddish (V-R=0.68, C/2000 K1), a neutral (V-R=0.47, C/1999 N4) and a slightly
bluish (V-R=0.25, C/1999 J2) coma. Simple fits of the surface brightness
distributions are also presented enabling order of magnitude estimates of
nuclear radii. Beside the time-series observations, further single-shot
observations of three faint comets are briefly described.Comment: 8 pages, 5 figures, accepted for publication in A&
Does Entrepreneurial Self-Efficacy Predict Discontinuation of Venture Idea Development?
Airfall on Comet 67P/Churyumov-Gerasimenko
We here study the transfer process of material from one hemisphere to the
other (deposition of airfall material) on an active comet nucleus, specifically
67P/Churyumov-Gerasimenko. Our goals are to: 1) quantify the thickness of the
airfall debris layers and how it depends on the location of the target area, 2)
determine the amount of and ice that are lost
from icy dust assemblages of different sizes during transfer through the coma,
and 3) estimate the relative amount of vapor loss in airfall material after
deposition in order to understand what locations are expected to be more active
than others on the following perihelion approach.
We use various numerical simulations, that include orbit dynamics,
thermophysics of the nucleus and of individual coma aggregates, coma gas
kinetics and hydrodynamics, as well as dust dynamics due to gas drag, to
address these questions. We find that the thickness of accumulated airfall
material varies substantially with location, and typically is of the order
-. The airfall material preserves substantial amounts of
water ice even in relatively small (cm-sized) coma aggregates after a rather
long () residence in the coma. However, is lost
within a couple of hours even in relatively large (dm-sized) aggregates, and is
not expected to be an important component in airfall deposits. We introduce
reachability and survivability indices to measure the relative capacity of
different regions to simultaneously collect airfall and to preserve its water
ice until the next perihelion passage, thereby grading their potential of
contributing to comet activity during the next perihelion passage.Comment: 65 pages, 11 figures. Published manuscrip
Impact of childhood experiences on the development of entrepreneurial intentions
Fostering entrepreneurship and an entrepreneurial culture has become a key policy priority for governments. To encourage entrepreneurship and an entrepreneurial culture, however, there is a need to understand the factors that influence and shape individuals' intentions to start a business. This study extends models of entrepreneurial intentions by investigating the influence of various childhood-experience factors on the perceived feasibility and desirability of starting a business. A structured questionnaire was completed by over 1,000 university students and analysed using regression analysis. Results indicated that perceptions of entrepreneurship were influenced not only by parental ownership of a business, but also by a difficult childhood and frequent relocation
- …