Adaptive Optics Images of Kepler Objects of Interest

All transiting planets are at risk of contamination by blends with nearby, unresolved stars. Blends dilute the transit signal, causing the planet to appear smaller than it really is, or produce a false positive detection when the target star is blended with eclipsing binary stars. This paper reports on high spatial-resolution adaptive optics images of 90 Kepler planetary candidates. Companion stars are detected as close as 0.1 arcsec from the target star. Images were taken in the near-infrared (J and Ks bands) with ARIES on the MMT and PHARO on the Palomar Hale 200-inch. Most objects (60%) have at least one star within 6 arcsec separation and a magnitude difference of 9. Eighteen objects (20%) have at least one companion within 2 arcsec of the target star; 6 companions (7%) are closer than 0.5 arcsec. Most of these companions were previously unknown, and the associated planetary candidates should receive additional scrutiny. Limits are placed on the presence of additional companions for every system observed, which can be used to validate planets statistically using the BLENDER method. Validation is particularly critical for low-mass, potentially Earth-like worlds, which are not detectable with current-generation radial velocity techniques. High-resolution images are thus a crucial component of any transit follow-up program.Comment: 9 pages, 4 figures, accepted to A

Predictions of the electrical conductivity and charging of the cloud particles in Jupiter's atmosphere

The electrical conductivity and electrical charge on cloud particles ( composed of ammonia, ammonium hydrosulfide, and water) in the atmosphere of Jupiter are computed for pressures between 5.5 and 0.1 bars. The source of ionization is galactic cosmic rays (GCR). The distribution of charge among the various reservoirs is a function of altitude and the total area of the aerosol particles. For pressures below 4 bars, the electrons are scavenged efficiently by the cloud particles, decreasing the electron- ion recombination rate and resulting in increased positive ion abundance over that in the absence of the particles. For the upper regions of each cloud layer, the area of the aerosols and the large diffusion rate of the electrons cause most aerosol particles to be negatively charged. Near the bases of the cloud layers, the larger total area of the aerosols causes most of the charge, positive and negative, to reside on particles. Where clouds are present, the reduction of the electron conductivity ranges from a factor of 30 at 0.1 bar to 10 4 at 4 bars. At pressures near 1 bar and 4 bars, the positive ion conductivity increases by a factor of 10 over that expected for the clear atmosphere. A parametric study of negative ions shows that they are likely to be insignificant. For altitudes below the 0.3- bar level the predicted positive and negative conductivities are well below the detection limit of the relaxation and mutual impedance instruments such as those employed on the Huygens entry probe

Red-giant stars in eccentric binaries

The unparalleled photometric data obtained by NASA’s Kepler Space Telescope has led to improved understanding of red-giant stars and binary stars. We discuss the characterization of known eccentric system, containing a solar-like oscillating red-giant primary component. We also report several new binary systems that are candidates for hosting an oscillating companion. A powerful approach to study binary stars is to combine asteroseimic techniques with light curve fitting. Seismology allows us to deduce the properties of red giants. In addition, by modeling the ellipsoidal modulations we can constrain the parameters of the binary system. An valuable independent source are ground-bases, high-resolution spectrographs

Detection of Potential Transit Signals in the First Three Quarters of Kepler Mission Data

We present the results of a search for potential transit signals in the first three quarters of photometry data acquired by the Kepler Mission. The targets of the search include 151,722 stars which were observed over the full interval and an additional 19,132 stars which were observed for only 1 or 2 quarters. From this set of targets we find a total of 5,392 detections which meet the Kepler detection criteria: those criteria are periodicity of the signal, an acceptable signal-to-noise ratio, and a composition test which rejects spurious detections which contain non-physical combinations of events. The detected signals are dominated by events with relatively low signal-to-noise ratio and by events with relatively short periods. The distribution of estimated transit depths appears to peak in the range between 40 and 100 parts per million, with a few detections down to fewer than 10 parts per million. The detected signals are compared to a set of known transit events in the Kepler field of view which were derived by a different method using a longer data interval; the comparison shows that the current search correctly identified 88.1% of the known events. A tabulation of the detected transit signals, examples which illustrate the analysis and detection process, a discussion of future plans and open, potentially fruitful, areas of further research are included

Detection of a transit of the super-Earth 55 Cnc e with Warm Spitzer

We report on the detection of a transit of the super-Earth 55 Cnc e with warm Spitzer in IRAC's 4.5-micron band. Our MCMC analysis includes an extensive modeling of the systematic effects affecting warm Spitzer photometry, and yields a transit depth of 410 +- 63 ppm, which translates to a planetary radius of 2.08 +- 0.16 R_Earth as measured in IRAC 4.5-micron channel. A planetary mass of 7.81 +- 0.58 M_Earth is derived from an extensive set of radial-velocity data, yielding a mean planetary density of 4.8 +- 1.3 g cm-3. Thanks to the brightness of its host star (V = 6, K = 4), 55 Cnc e is a unique target for the thorough characterization of a super-Earth orbiting around a solar-type star.Comment: Accepted for publication in A&A on 31 July 2011. 9 pages, 7 figures and 3 tables. Minor changes. The revised version includes a baseline models comparison and a new figure presenting the spatially- and time-dependent terms of the model function used in Eq.

Photometric Variability in Kepler Target Stars: The Sun Among Stars -- A First Look

The Kepler mission provides an exciting opportunity to study the lightcurves of stars with unprecedented precision and continuity of coverage. This is the first look at a large sample of stars with photometric data of a quality that has heretofore been only available for our Sun. It provides the first opportunity to compare the irradiance variations of our Sun to a large cohort of stars ranging from vary similar to rather different stellar properties, at a wide variety of ages. Although Kepler data is in an early phase of maturity, and we only analyze the first month of coverage, it is sufficient to garner the first meaningful measurements of our Sun's variability in the context of a large cohort of main sequence stars in the solar neighborhood. We find that nearly half of the full sample is more active than the active Sun, although most of them are not more than twice as active. The active fraction is closer to a third for the stars most similar to the Sun, and rises to well more than half for stars cooler than mid K spectral types.Comment: 13 pages, 4 figures, accepted to ApJ Letter

Possibility of a photometric detection of "exomoons"

We examined which exo-systems contain moons that may be detected in transit. We numerically modeled transit light curves of Earth-like and giant planets that cointain moons with 0.005--0.4 Earth-mass. The orbital parameters were randomly selected, but the entire system fulfilled Hill-stability. We conclude that the timing effect is caused by two scenarios: the motion of the planet and the moon around the barycenter. Which one dominates depends on the parameters of the system. Already planned missions (Kepler, COROT) may be able to detect the moon in transiting extrasolar Earth-Moon-like systems with a 20% probability. From our sample of 500 free-designed systems, 8 could be detected with the photometric accuracy of 0.1 mmag and a 1 minute sampling, and one contains a stony planet. With ten times better accuracy, 51 detections are expected. All such systems orbit far from the central star, with the orbital periods at least 200 and 10 days for the planet and the moon, while they contain K- and M-dwarf stars. Finally we estimate that a few number of real detections can be expected by the end of the COROT and the Kepler missions.Comment: 5 pages, 4 figures, accepted by Astronomy and Astrophysic

Physics of Eclipsing Binaries: Modelling in the new era of ultra-high precision photometry

Recent ultra-high precision observations of eclipsing binaries, especially data acquired by the Kepler satellite, have made accurate light curve modelling increasingly challenging but also more rewarding. In this contribution, we discuss low-amplitude signals in light curves that can now be used to derive physical information about eclipsing binaries but that were unaccessible before the Kepler era. A notable example is the detection of Doppler beaming, which leads to an increase in flux when a star moves towards the satellite and a decrease in flux when it moves away. Similarly, Rømer delays, or light travel time effects, also have to taken into account when modelling the supreme quality data that is now available. The detection of offsets between primary and secondary eclipse phases in binaries with extreme mass ratios, and the observation of Rømer delays in the signals of pulsators in binary stars, have allowed us to determine the orbits of several binaries without the need for spectroscopy. A third example of a small-scale effect that has to be taken into account when modelling specific binary systems, are lensing effects. A new binary light curve modelling code, PHOEBE 2.0, that takes all these effect into account is currently being developed