Global variability in seawater Mg:Ca and Sr:Ca ratios in the modern ocean

Seawater Mg:Ca and Sr:Ca ratios are biogeochemical parameters reflecting the Earth–ocean–atmosphere dynamic exchange of elements. The ratios’ dependence on the environment and organisms' biology facilitates their application in marine sciences. Here, we present a measured single-laboratory dataset, combined with previous data, to test the assumption of limited seawater Mg:Ca and Sr:Ca variability across marine environments globally. High variability was found in open-ocean upwelling and polar regions, shelves/neritic and river-influenced areas, where seawater Mg:Ca and Sr:Ca ratios range from ∼4.40 to 6.40 mmol:mol and ∼6.95 to 9.80 mmol:mol, respectively. Open-ocean seawater Mg:Ca is semiconservative (∼4.90 to 5.30 mol:mol), while Sr:Ca is more variable and nonconservative (∼7.70 to 8.80 mmol:mol); both ratios are nonconservative in coastal seas. Further, the Ca, Mg, and Sr elemental fluxes are connected to large total alkalinity deviations from International Association for the Physical Sciences of the Oceans (IAPSO) standard values. Because there is significant modern seawater Mg:Ca and Sr:Ca ratios variability across marine environments we cannot absolutely assume that fossil archives using taxa-specific proxies reflect true global seawater chemistry but rather taxa- and process-specific ecosystem variations, reflecting regional conditions. This variability could reconcile secular seawater Mg:Ca and Sr:Ca ratio reconstructions using different taxa and techniques by assuming an error of 1 to 1.50 mol:mol, and 1 to 1.90 mmol:mol, respectively. The modern ratios’ variability is similar to the reconstructed rise over 20 Ma (Neogene Period), nurturing the question of seminonconservative behavior of Ca, Mg, and Sr over modern Earth geological history with an overlooked environmental effect

Correction for Lebrato et al., Global variability in seawater Mg:Ca and Sr:Ca ratios in the modern ocean

4 pages, 5 figures.-- Correction Global variability in seawater Mg:Ca and Sr:Ca ratios in the modern ocean; Proceedings of the National Academy of Sciences of the USA 117(36): 22281-22292 (2020); doi: 10.1073/pnas.1918943117; http://hdl.handle.net/10261/221953The authors wish to note the following: “This study’s seawater Sr:Ca values were systematically low as a consequence of normalization to another published low value for the International Association for the Physical Sciences of the Oceans (IAPSO) (1). IAPSO has been used at the Ocean Drilling Program, Texas A&M University (ODP-TAMU) (http://www-odp.tamu.edu/), and is still being used as the primary standard for elemental composition of seawater/interstitial water. Consequently, our seawater value of Sr:Ca = 8.28 mmol:mol was systematically low by approx. 3.70%, if we accept seawater Sr:Ca 8.60 mmol:mol as the recommended value for IAPSO North Atlantic surface water salinity standard. The uncertainty budget should be expanded including the uncertainty of IAPSO composition. The largest contribution to expanded uncertainty of our data comes from the uncertainty of the IAPSO reference composition, which is 3.29% using all published values. This will result in 3.30% (1 SD) expanded uncertainty for seawater Sr:Ca (and 0.5%, for seawater Mg:Ca) of the entire data set with respect to accuracy. We have corrected all seawater Sr:Ca values with a factor of 1.0243 in all our tables (e.g., SI Appendix, Table S1 averages) and in the figures (Fig. 4, Fig. 5), where a ratio was used. Note that the seawater Sr:Ca % changes are small, thus changes are hardly noticeable on large displays (e.g., Figures), but they can be seen in the tables and averages/SD calculations. Seawater Sr:Ca ratios are also corrected in the main text where relevantPeer reviewe

System design of a fast W-band line scan camera using a broadband SFCW approach

In this paper the development of a W-band line scan camera for the use in industrial quality control applications is described. In order to achieve a high line scan rate, a DDS-based baseband generation approach is employed to drive multiple pixel clusters. Each cluster comprising four channels is operated in a time-division multiplexed mode. This allows for the channel clusters to be cascaded and enables wide scan lines without causing additional timing or configuration overhead. The novel system approach is based on independent frontend modules enabling transmission and reflection measurements as well as hybrid geometries. Using flexible dielectric waveguides and 3D printed support structures, arbitrary pixel configurations can be realized in space-constrained environments. The scan time of below 2 ms for a scan line of arbitrary width qualifies the system for the use in real time measurements on conveyor belts with speeds exceeding 5 m/s

Radar-Based High Precision Thickness Measurement for Rolling Mills

Nowadays, hot and cold rolling of steel strips is mainly monitored by optical or radiometric measurement systems. In some production stages, however, conventional systems still face challenges due to harsh environmental conditions or other influencing factors. To meet some of these challenges, a prototype system consisting of eight radar sensors for thickness measurement of steel strips in hot and cold rolling mills is being developed. It provides an accuracy in the micrometre range and is being optimized for the conditions in the mill. After finishing the laboratory tests, the radar sensors will be implemented in an industrial measurement gauge and tested in the field. In the following, the system setup and results of laboratory measurements are presented

Material characteristics of concretes during the dehydration process in furnaces

Improvements in safety, quality and costs in industrial processes depend significantly on measuring the characteristics of products during their production process. Insensitivity to steam, dust and spray water, temperature independent measurements and the penetration of non-electric materials are technological advantages of radar radiation for industrial applications. As a high temperature environment, the water content of concretes in furnaces is an important parameter to analyse before heating up the furnace after a refractory lining. A radar based moisture measurement system for concretes in furnaces is presented in this paper

Global variability in seawater Mg:Ca and Sr:Ca ratios in the modern ocean

Seawater Mg:Ca and Sr:Ca ratios are biogeochemical parameters reflecting the Earth–ocean–atmosphere dynamic exchange of elements. The ratios’ dependence on the environment and organisms' biology facilitates their application in marine sciences. Here, we present a measured single-laboratory dataset, combined with previous data, to test the assumption of limited seawater Mg:Ca and Sr:Ca variability across marine environments globally. High variability was found in open-ocean upwelling and polar regions, shelves/neritic and river-influenced areas, where seawater Mg:Ca and Sr:Ca ratios range from ∼4.40 to 6.40 mmol:mol and ∼6.95 to 9.80 mmol:mol, respectively. Open-ocean seawater Mg:Ca is semiconservative (∼4.90 to 5.30 mol:mol), while Sr:Ca is more variable and nonconservative (∼7.70 to 8.80 mmol:mol); both ratios are nonconservative in coastal seas. Further, the Ca, Mg, and Sr elemental fluxes are connected to large total alkalinity deviations from International Association for the Physical Sciences of the Oceans (IAPSO) standard values. Because there is significant modern seawater Mg:Ca and Sr:Ca ratios variability across marine environments we cannot absolutely assume that fossil archives using taxa-specific proxies reflect true global seawater chemistry but rather taxa- and process-specific ecosystem variations, reflecting regional conditions. This variability could reconcile secular seawater Mg:Ca and Sr:Ca ratio reconstructions using different taxa and techniques by assuming an error of 1 to 1.50 mol:mol, and 1 to 1.90 mmol:mol, respectively. The modern ratios’ variability is similar to the reconstructed rise over 20 Ma (Neogene Period), nurturing the question of seminonconservative behavior of Ca, Mg, and Sr over modern Earth geological history with an overlooked environmental effect