Improving Monolithic Perovskite Silicon Tandem Solar Cells From an Optical Viewpoint

Perovskite silicon tandem solar cells are the most promising concept for a future photovoltaic technology. We report on recent progress from an optical viewpoint and disucss how we achieved more than 25 device efficienc

Perovskite CIGS Tandem Solar Cells From Certified 24.2 toward 30 and Beyond

We demonstrate a monolithic perovskite CIGS tandem solar cell with a certified power conversion efficiency PCE of 24.2 . The tandem solar cell still exhibits photocurrent mismatch between the subcells; thus optical simulations are used to determine the optimal device stack. Results reveal a high optical potential with the optimized device reaching a short circuit current density of 19.9 mA cm 2 and 32 PCE based on semiempirical material properties. To evaluate its energy yield, we first determine the CIGS temperature coefficient, which is at amp; 8722;0.38 K 1 notably higher than the one from the perovskite subcell amp; 8722;0.22 K 1 , favoring perovskite in the field operation at elevated cell temperatures. Both single junction cells, however, are significantly outperformed by the combined tandem device. The enhancement in energy output is more than 50 in the case of CIGS single junction device. The results demonstrate the high potential of perovskite CIGS tandem solar cells, for which we describe optical guidelines toward 30 PC

Textured interfaces in monolithic perovskite silicon tandem solar cells advanced light management for improved efficiency and energy yield

Efficient light management in monolithic perovskite silicon tandem solar cells is one of the prerequisites for achieving high power conversion efficiencies PCEs . Textured silicon wafers can be utilized for light management, however, this is typically not compatible with perovskite solution processing. Here, we instead employ a textured light management LM foil on the front side of a tandem solar cell processed on a wafer with planar front side and textured back side. This way the PCE of monolithic, 2 terminal perovskite silicon heterojunction tandem solar cells is significantly improved from 23.4 to 25.5 . Furthermore, we validate an advanced numerical model for our fabricated device and use it to optically optimize a number of device designs with textures at different interface with respect to the PCE and energy yield. These simulations predict a slightly lower optimal bandgap of the perovskite top cell in a textured device as compared to a flat one and demonstrate strong interdependency between the bandgap and the texture position in the monolithic stack. We estimate the PCE potential for the best performing both side textured device to be 32.5 for a perovskite bandgap of 1.66 eV. Furthermore, the results show that under perpendicular illumination conditions, for optimized designs, the LM foil on top of the cell performs only slightly better than a flat anti reflective coating. However, under diffuse illumination, the benefits of the LM foil are much greater. Finally, we calculate the energy yield for the different device designs, based on true weather data for three different locations throughout the year, taking direct as well as diffuse illumination fully into account. The results further confirm the benefits of front side texture, even more for BIPV applications. Overall, devices built on a both side textured silicon wafer perform best. However, we show that devices with textured LM foils on the cell s front side are a highly efficient alternativ

27.9 Efficient Monolithic Perovskite Silicon Tandem Solar Cells on Industry Compatible Bottom Cells

Monolithic perovskite silicon tandem solar cells recently surpass the efficiency of silicon single junction solar cells. Most tandem cells utilize gt;250 amp; 8201; amp; 956;m thick, planarized float zone FZ silicon, which is not compatible with commercial production using lt;200 amp; 8201; amp; 956;m thick Czochralski CZ silicon. The perovskite silicon tandem cells based on industrially relevant 100 amp; 8201; amp; 956;m thick CZ silicon without mechanical planarization are demonstrated. The best power conversion efficiency PCE of 27.9 is only marginally below the 28.2 reference value obtained on the commonly used front side polished FZ Si, which are about three times thicker. With both wafer types showing the same median PCE of 27.8 , the thin CZ Si based devices are preferred for economic reasons. To investigate perspectives for improved current matching and, therefore, further efficiency improvement, optical simulations with planar and textured silicon have been conducted the perovskite s bandgap needs to be increased by amp; 8776;0.02 amp; 8201;eV when reducing the silicon thickness from 280 to 100 amp; 8201; amp; 956;m. The need for bandgap enlargement has a strong impact on future tandem developments ensuring photostable compositions with lossless interfaces at bandgaps around or above 1.7 amp; 8201;e

Slot Die Coated Triple Halide Perovskites for Efficient and Scalable Perovskite Silicon Tandem Solar Cells

Wide bandgap halide perovskite materials show promising potential to pair with silicon bottom cells. To date, most efficient wide bandgap perovskites layers are fabricated by spin coating, which is difficult to scale up. Here, we report on slot die coating for an efficient, 1.68 eV wide bandgap triple halide 3halide perovskite absorber, Cs0.22FA0.78 Pb I0.85Br0.15 3 5 mol MAPbCl3. A suitable solvent system is designed specifically for the slot die coating technique. We demonstrate that our fabrication route is suitable for tandem solar cells without phase segregation. The slot die coated wet halide perovskite is dried by a nitrogen N2 knife with high reproducibility and avoiding antisolvents. We explore varying annealing conditions and identify parameters allowing crystallization of the perovskite film into large grains reducing charge collection losses and enabling higher current density. At 150 C, an optimized trade off between crystallization and the PbI2 aggregates on the film s top surface is found. Thus, we improve the cell stability and performance of both single junction cells and tandems. Combining the 3halide top cells with a 120 amp; 956;m thin saw damage etched commercial Czochralski industrial wafer, a 2 terminal monolithic tandem solar cell with a PCE of 25.2 on a 1 cm2 active area is demonstrated with fully scalable processe

21.6 efficient Monolithic Perovskite Cu In,Ga Se2 Tandem Solar Cells with Thin Conformal Hole Transport Layers for Integration on Rough Bottom Cell Surfaces

Perovskite based tandem solar cells can increase the power conversion efficiency PCE of conventional single junction photovoltaic devices. Here, we present monolithic perovskite CIGSe tandem solar cells with a perovskite top cell fabricated directly on an as grown, rough CIGSe bottom cell. To prevent potential shunting due to the rough CIGSe surface, a thin NiOx layer is conformally deposited via atomic layer deposition on the front contact of the CIGSe bottom cell. The performance is further improved by an additional layer of the polymer PTAA at the NiOx perovskite interface. This hole transport bilayer enables a 21.6 stabilized PCE of the tandem device at amp; 8764;0.8 cm2 active area. We use TEM EDX measurements to investigate the deposition uniformity and conformality of the NiOx and PTAA layers. By absolute photoluminescence measurements, the contribution of the individual subcells to the tandem VOC is determined, revealing that further fine tuning of the recombination layers might improve the tandem VOC. Finally, on the basis of the obtained results, we give guidelines to improve monolithic perovskite CIGSe tandems toward predicted PCE estimates above 3

Determining Structure Activity Relationships in Oxide Derived Cu Sn Catalysts During CO2 Electroreduction Using X Ray Spectroscopy

The development of earth abundant catalysts for selective electrochemical CO2 conversion is a central challenge. Cu amp; 63743;Sn bimetallic catalysts can yield selective CO2 reduction toward either CO or formate. This study presents oxide derived Cu amp; 63743;Sn catalysts tunable for either product and seeks to understand the synergetic effects between Cu and Sn causing these selectivity trends. The materials undergo significant transformations under CO2 reduction conditions, and their dynamic bulk and surface structures are revealed by correlating observations from multiple methods X ray absorption spectroscopy for in situ study, and quasi in situ X ray photoelectron spectroscopy for surface sensitivity. For both types of catalysts, Cu transforms to metallic Cu0 under reaction conditions. However, the Sn speciation and content differ significantly between the catalyst types the CO selective catalysts exhibit a surface Sn content of 13 at. predominantly present as oxidized Sn, while the formate selective catalysts display an Sn content of amp; 8776;70 at. consisting of both metallic Sn0 and Sn oxide species. Density functional theory simulations suggest that Sn amp; 948; sites weaken CO adsorption, thereby enhancing CO selectivity, while Sn0 sites hinder H adsorption and promote formate production. This study reveals the complex dependence of catalyst structure, composition, and speciation with electrochemical bias in bimetallic Cu catalyst

Subcell Operation and Long Term Stability Analysis of Perovskite Based Tandem Solar Cells Using a Bichromatic Light Emitting Diode Light Source

In monolithic tandem solar cells, current voltage J V characteristics of subcells provide invaluable information about their quality and tandem operation. However, accessing the subcell J Vs is challenging and requires sophisticated spectral methods. Herein, a customized, bichromatic light emitting diode setup BCLED for in depth analysis of tandem solar cells, suitable for subcell operation analysis, and long term stability testing is presented. For this, two spectrally independent LED arrays are used to selectively bias the two subcells. The power of the developed setup is demonstrated by successfully disentangling the tandem J V curve into subcell J V curves. The method is based on a one diode model for each subcell and is validated by electrical simulations. Afterward, it is used on a fabricated 27.6 efficient perovskite silicon tandem device, resulting in great agreement with the measured J V curve. Therefore, the BCLED setup is a versatile tool, suitable for subcell characteristics and long term stability analysis of tandem solar cell

Nemateriālo aktīvu grāmatvedības metodoloģiskās problēmas Latvijas Republikā

Nonfluorinated hydrophobic surfaces are of interest for reduced cost, toxicity, and environmental problems. Searching for such surfaces together with versatile processing, A200 silica nanoparticles are modified with an oligodimethylsiloxane and used by themselves or with a polymer matrix. The goal of the surface modification is controlled aggregate size and stable suspensions. Characterization is done by NMR, microanalysis, nitrogen adsorption, and dynamic light scattering. The feasibility of the concept is then demonstrated. The silica aggregates are sprayed in a scalable process to form ultrahydrophobic and imperceptible coatings with surface topographies of controlled nanoscale roughness onto different supports, including nanofibrillated cellulose. To improve adhesion and wear properties, the organosilica was mixed with polymers. The resulting composite coatings are characterized by FE-SEM, AFM, and contact angle measurements. Depending on the nature of the polymer, different functionalities can be developed. Poly­(methyl methacrylate) leads to almost superhydrophobic and highly transparent coatings. Composites based on commercial acrylic car paint show “pearl-bouncing” droplet behavior. A light-emitting polyfluorene is synthesized to prepare luminescent and water repellent coatings on different supports. The interactions between polymers and the organosilica influence coating roughness and are critical for wetting behavior. In summary, the feasibility of a facile, rapid, and fluorine-free hydrophobization concept was successfully demonstrated in multipurpose antiwetting applications

Strategy for large???scale monolithic Perovskite/Silicon tandem solar cell: A review of recent progress

For any solar cell technology to reach the final mass-production/commercialization stage, it must meet all technological, economic, and social criteria such as high efficiency, large-area scalability, long-term stability, price competitiveness, and environmental friendliness of constituent materials. Until now, various solar cell technologies have been proposed and investigated, but only crystalline silicon, CdTe, and CIGS technologies have overcome the threshold of mass-production/commercialization. Recently, a perovskite/silicon (PVK/Si) tandem solar cell technology with high efficiency of 29.1% has been reported, which exceeds the theoretical limit of single-junction solar cells as well as the efficiency of stand-alone silicon or perovskite solar cells. The International Technology Roadmap for Photovoltaics (ITRPV) predicts that silicon-based tandem solar cells will account for about 5% market share in 2029 and among various candidates, the combination of silicon and perovskite is the most likely scenario. Here, we classify and review the PVK/Si tandem solar cell technology in terms of homo- and hetero-junction silicon solar cells, the doping type of the bottom silicon cell, and the corresponding so-called normal and inverted structure of the top perovskite cell, along with mechanical and monolithic tandemization schemes. In particular, we review and discuss the recent advances in manufacturing top perovskite cells using solution and vacuum deposition technology for large-area scalability and specific issues of recombination layers and top transparent electrodes for large-area PVK/Si tandem solar cells, which are indispensable for the final commercialization of tandem solar cells