Addressing present pitfalls in 3D printing for tissue engineering to enhance future potential

Additive manufacturing in tissue engineering has significantly advanced in acceptance and use to address complex problems. However, there are still limitations to the technologies used and potential challenges that need to be addressed by the community. In this manuscript, we describe how the field can be advanced not only through the development of new materials and techniques but also through the standardization of characterization, which in turn may impact the translation potential of the field as it matures. Furthermore, we discuss how education and outreach could be modified to ensure end-users have a better grasp on the benefits and limitations of 3D printing to aid in their career development

STANDARDIZATION AND COMPARATIVE EVALUATION OF AYURVEDIC POLYHERBAL GHRITA FORMULATION WITH MODERN EXTRACTION TECHNIQUE FOR EXTRACTION EFFICIENCY USING REVERSED PHASE-HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY

Objective: Sarasvata ghrita (SG) is a polyherbal formulation in Ayurvedic Indian medicinal system, in which ghee is the main ingredient used for extraction. Ghee is 100% lipid, thus its regular use is limited, and there is a lack of quality control profile of SG. Thus, the objective of the study is to develop quality control method for standardization of SG and to analyze manufacturing process of SG and an effective method of extraction to extract phytoconstituents from herbs used in SG to overcome the limitation of SG.Methods: SG was processed as per the traditional method, whereas ethanolic extract (EE) and hydroalcoholic extract (HAE) were obtained by the conventional method and lipid-based extract (LE) was prepared by modern extraction method. SG and all extracts were standardized using newly developed high-performance liquid chromatography (LC) with respect to bebeerine, piperine, 6-shogaol, β-asarone, and chebulinic acid. All extracts were analyzed for pesticides, and heavy metal content by LC/mass spectrometry (MS/MS) and inductively coupled plasma/MS, respectively, screened for total polyphenols and flavonoids content, in vitro antioxidant potential, and for assessing its stability over time.Results: The better extraction was observed with maceration extraction using ethanol compared to ayurvedic method and LE method. All extracts were found to have a negligible amount of pesticide and heavy metals and found to be stable for 6 months under accelerated storage condition. Better polyphenols and flavonoid content and in vitro antioxidant potential were resulted in EE.Conclusion: EE showed a better potential in comparison with SG and LE

RAPD Analysis for Determination of Components in Herbal Medicine

In this study, the RAPD (Random Amplified Polymorphic DNA) technique was employed for determination of the components in an Ayurvedic herbal prescription, Rasayana Churna. One-hundred-and-twenty decamer oligonucleotide primers were screened in the RAPD analysis to identify three Ayurvedic medicines, dried stem of Tinospora cordifolia, dried fruit of Emblica officinalis and dried fruit of Tribulus terestris, the Ayurvedic prescription. Primer OPC-6 simultaneously generated three distinct amplicons, each specific to one component. The marker with 600 bp is specific to Tinospora cordifolia; the marker 500 bp is specific to Emblica officinalis and the remaining marker >1000 bp was present in Tribulus terestris. Presence of three herbal medicines was determined when RAPD reaction with OPC-6 was performed. The technique was proved to contribute to the identification of components in Ayurvedic herbal preparation and thus helping to serve as a complementary tool for quality control

Anti-inflammatory and analgesic activity of different fractions of Boswellia serrata

The study was designed to investigate the anti-inflammatory and analgesic effect of different fractions of Boswellia serrata. The effect of different fractions of Boswellia serrata were studied using carrageenan induced paw edema, acetic acid induced writhing response, formalin induced pain, hot plate and tail flick method for studying anti-inflammatory and analgesic activity, respectively. The different fractions of B. serrata, essential oil (10 ml/kg), gum (100 mg/kg, resin (100 mg/kg) oleo-resin (100 mg/kg) and oleo-gum-resin (100 mg/kg) significantly reduces carrageenan induced inflammation in rats and shows analgesic activity, as determined by acetic acid induced writhing response, formalin induced pain, hot plate and tail flick method. The different fractions of B. serrata showed prompt anti-inflammatory and analgesic activity due to the inhibition of 5-lipoxygenase enzyme.Keywords: Analgesic; Boswellia serrata; Inflammation; 5- lipoxygenase; Burseraceae

Coupon scale Z-pinned IM7/8552 delamination tests under dynamic loading

Dynamic impact onto laminated composite structures can lead to large-scale delamination. This can be mitigated by the introduction of through-thickness reinforcement, such as z-pins. Here, mode I & II and mixed-mode delamination tests have been designed and conducted at high loading rate, for both unpinned and Z-pinned coupons to study the effect of rate of loading. It was found that the Z-pins were not effective in delaying the dynamic crack initiation or resisting the dynamic propagation of delaminations shorter than 5 mm. However, the further growth of cracks was substantially delayed by Z-pinning, especially for the pure mode I and mode I dominated failure modes. On the other hand, the effectiveness of Z-pins in shear tests was relatively modest. The mode I dominated delamination resistance of Z-pinned laminates was found to be sensitive to the loading rate

SEPARATION OF BACOSIDE A 3 AND BACOPASIDE II, MAJOR TRITERPENOID SAPONINS IN Bacopa monnieri, BY HPTLC AND SFC. APPLICATION OF SFC IN IMPLEMENTATION OF UNIFORM DESIGN FOR HERBAL DRUG STANDARDIZATION, WITH THERMODYNAMIC STUDY

SUMMARY Development, optimization, and validation of new analytical methods for standardization of bacoside A 3 and bacopaside II, the major triterpenoid saponins present in Bacopa monnieri extract, are needed to improve the quality assurance of derived extracts and phytomedicines. Two chromatographic methods are described for evaluation of the quality of Bacopa monnieri extract and its commercial formulations. The first is reversed-phase high-performance thin-layer chromatography (RP-HPTLC), the second is packed column supercritical-fluid chromatography with photodiode-array detection (PC-SFC-DAD). SFC conditions were optimized by uniform design. The effect of temperature on the separation of the saponins was studied in detail. The Van't Hoff plots for retention and selectivity were found to be linear. To obtain a better understanding of the different separations, the temperature dependence was studied to determine the thermodynamic data ∆H°, ∆S°, ∆∆H° and ∆∆S°. These data revealed that separation of bacoside A 3 was enthalpically favoured in the range of temperatures investigated whereas entropy-controlled separation was observed for bacopaside II. Both methods were validated for precision, robustness, recovery, and limits of detection and quantitation. Analysis of variance (ANOVA) and Student's t-test were used to correlate results from quantitative determination of the markers by RP-HPTLC and PC-SFC-DAD. -126

Зарубежный опыт в материальном стимулировании персонала

Материалы XVII Междунар. науч.-техн. конф. студентов, аспирантов и молодых ученых, Гомель, 27–28 апр. 2017 г

Tracing the architecture of caffeic acid phenethyl ester cocrystals: studies on crystal structure, solubility, and bioavailability implications

YesCaffeic acid phenethyl ester (CAPE) is a polyphenolic active compound present in popular apiproduct, ‘propolis’ obtained from beehives. Though it has broad therapeutic capability, the bioavailability of CAPE is limited due to poor solubility. In this study, we report novel cocrystals of CAPE engineered using coformers such as caffeine (CAF), isonicotinamide (INIC), nicotinamide (NIC) with enhanced solubility and bioavailability of CAPE. The cocrystals were prepared by microwave-assisted cocrystallization and characterized using PXRD, DSC and Raman spectroscopy. PXRD and DSC confirm the successful formation and phase purity of CAPE-CAF, CAPE-INIC and CAPE-NIC cocrystals. Raman spectra of CAPE cocrystals complement these results in confirming the formation of novel crystalline phases. CAPE-NIC cocrystal was further subjected to X-ray crystallography to understand its molecular arrangement and hydrogen bonding in the crystal structure. The CAPE-NIC cocrystal structure is found to be stabilized by a rare 1,2-benzenediol-amide heterosynthon. Cocrystallization of CAPE with NIC improved its aqueous solubility and pharmacokinetic profile thereby demonstrating 2.76 folds escalation in bioavailability.We thank UKIERI: UK-India Education and Research Initiative (TPR26) and EPSRC (EP/J003360/1, EP/L027011/1) for providing financial support during this study

Genetic diversity studies in kodo millet (Paspalum scrobiculatum L.)

The present investigation was undertaken to assess genetic diversity in seventy genotypes of kodo millet. The analysis of variance revealed the presence of significant variation among the genotypes for all 13 characters. Higher genotypic coefficient of variation (GCV), phenotypic coefficient of variation (PCV), heritability and genetic advance as per cent mean were recorded for thumb raceme length, number of productive tillers per plant, length of panicle, raceme length and grain yield per plant, indicating that simple selection could be practised for improving these traits. Seventy genotypes were grouped into seven different clusters on the basis of magnitude of D2 values by Mahalanobis D2 analysis. Cluster I had 51 genotypes followed by cluster II with 14 genotypes, while clusters III, IV, V, VI and VII were mono genotypic. The inter–cluster distance was high between clusters II and III and therefore it is suggested to use these genotypes as parents for hybridization to evolve potential segregants