1,440 research outputs found
On the Geometric Ramsey Number of Outerplanar Graphs
We prove polynomial upper bounds of geometric Ramsey numbers of pathwidth-2
outerplanar triangulations in both convex and general cases. We also prove that
the geometric Ramsey numbers of the ladder graph on vertices are bounded
by and , in the convex and general case, respectively. We
then apply similar methods to prove an upper bound on the
Ramsey number of a path with ordered vertices.Comment: 15 pages, 7 figure
TensorQuant - A Simulation Toolbox for Deep Neural Network Quantization
Recent research implies that training and inference of deep neural networks
(DNN) can be computed with low precision numerical representations of the
training/test data, weights and gradients without a general loss in accuracy.
The benefit of such compact representations is twofold: they allow a
significant reduction of the communication bottleneck in distributed DNN
training and faster neural network implementations on hardware accelerators
like FPGAs. Several quantization methods have been proposed to map the original
32-bit floating point problem to low-bit representations. While most related
publications validate the proposed approach on a single DNN topology, it
appears to be evident, that the optimal choice of the quantization method and
number of coding bits is topology dependent. To this end, there is no general
theory available, which would allow users to derive the optimal quantization
during the design of a DNN topology. In this paper, we present a quantization
tool box for the TensorFlow framework. TensorQuant allows a transparent
quantization simulation of existing DNN topologies during training and
inference. TensorQuant supports generic quantization methods and allows
experimental evaluation of the impact of the quantization on single layers as
well as on the full topology. In a first series of experiments with
TensorQuant, we show an analysis of fix-point quantizations of popular CNN
topologies
Estimation of silver nanoparticles size in SiO2 sol-gel layers by use of UV-VIS spectroscopy
Silica glass layers containing silver nanoparticles were prepared by the sol-gel method. The layers were deposited on a glass substrate by the dip-coating method, dried and heat treated at various temperatures. The average silver particle size was determined from absorption spectra according to Mie’s theory. A good correlation was found between the calculated values and analysis of HRTEM images. A very narrow size distribution was obtained by this procedure. The average particle size of silver particles fell between 1 and 2 nm for dried samples; in case of glasses treated at 500 and 550°C the size ranged between 2 and 4 nm
Hyaluronan random coils in electrolyte solutions—a molecular dynamics study
A computational method of modeling random coils of hyaluronan was developed based on the molecular-dynamics simulations. An oligosaccharide of 48 monosaccharide units was equilibrated within a 70–100 ns simulation and randomly chosen pieces of this molecule from different simulation frames were combined to constitute a long polysaccharide chain, both for hyaluronan and its non-ionic analog containing glucose instead of glucuronic acid. The dihedral angles of the glycoside connections of the pieces obeyed the statistics deduced from the simulation. The simulations were performed at various concentrations of NaCl and MgCl2. The calculated radii of gyration show a striking agreement with experimental data from the literature and indicate a key importance of the polymer-ion interactions for the random-coil conformation, but a low influence of the excluded volume of the chain and the carboxylate-groups repulsion. The method has thus the potential to become a versatile tool of modeling macromolecules of various semirigid polymers. © 2017 Elsevier LtdNational Grid Infrastructure MetaCentrum, provided under the program "Projects of Large Research, Development, and Innovations Infrastructures" [CESNET LM2015042
Effects of Ultrasound Power, Temperature and Flow Rate of Solvent on Decontamination of Sensitive Equipment by Extraction
The solvent extraction process is regarded amongst other known methods to be applicable for decontamination of sensitive equipment components, especially in cases the components are contaminated in-depth with chemical warfare agents. Viability of the solvent extraction method was evaluated on coupons of butadiene rubber contaminated by sulphur mustard before decontamination by the solvent extraction. The contaminated coupons were extracted in a flow cell, which the solvent (ethoxynonafluorobutane) passed through. Three following specific operational factors, namely the temperature, the flow rate, and the power of ultrasound bath, were assessed for the extent of influencing upon the respective observed extraction efficiencies. The paper describes the results of the evaluation of the solvent extraction effectiveness.Defence Science Journal, 2014, 64(2), pp. 168-172. DOI: http://dx.doi.org/10.14429/dsj.64.388
PRECISENESS OF SATELLITE NAVIGATION SYSTEM GPS AND ITS AVAILABILITY UNDER CRITICAL CONDITIONS
Článek se zabývá přesností určování polohy pomocí satelitů označovaných zkratkou GNSS (Global Navigation Satellite Systems). Obecně popisuje princip činnosti těchto systémů, podává souhrnnou informaci o příčinách chyb při určování polohy prostřednictvím systému GPS a experimentálně ověřuje základní vlastnosti moderního přijímače GPS.The paper is aimed on accuracy of location determination through satellites called GNSS (Global Navigation Satellite Systems). It generally describes the principles of these systems working and provides information about cause of mistakes made during GPS location determination. It also experimentally checks basic parameters of modern reciever GPS
The Influence of Electrolyte Temperature on Characteristics of Ni- Fe Electrodeposits
Import 04/07/2011MAREK, J. Vliv teploty elektrolytu na vlastnosti slitinového galvanického povlaku Ni-Fe. Ostrava: katedra mechanické technologie, Fakulta strojní VŠB – Technická univerzita Ostrava, 2011, Diplomová práce, vedoucí Ing. Xenie Ševčíková.
Diplomová práce se zaměřuje na vliv teploty elektrolytu a složení lázně
u galvanických povlaků Ni-Fe. Cílem je zachování mechanických vlastností Ni-Fe povlaku, při dosažení co nejnižších teplot lázně elektrolytu. Práce obsahuje teoretický popis Ni-Fe povlaků, požadavky na ně kladené a prvky ovlivňující vylučování Ni-Fe povlaku. S využitím poznatků v galvanotechnice byly stanoveny parametry vylučování. Experimentální část se poté zabývá působením změn parametru na mechanické vlastnosti Ni-Fe povlaků.MAREK, J. The Influence of Electrolyte Temperature on Characteristics of Ni- Fe Electrodeposits. Ostrava: Department of Mechanical Technology, Faculty of Mechanical Engineering VŠB - Technical University of Ostrava, 2011, head: Ing. Xenie Ševčíková
This graduation thesis focuses on theinfluence of temperature and electrolyte bath composition forelectroplating Ni -Fecoatings. The aim is to preserve the mechanical properties of Ni-Fe coating process to achieve the lowest temperature of the bath electrolyte. The work includes a theoretical description of the Ni-Fe coatings, the requirements placed on them and the elements affecting the secretion of Ni-Fe coating. Using knowledge of electroplating parameters were determined excretion.
The experimental section then deals with the effects of parameter changes on the mechanical properties of Ni-Fe coatings.345 - Katedra mechanické technologievýborn
Recommended from our members
Landscape Connectivity bottlenecks in the Moravian-Slovak Borderlands - Transport Infrastructure and Other Anthropogenic Threats
Based on the findings of the TransGREEN and SaveGREEN projects, changes in land use in selected critical locations were analysed for the period after 1990, when new socio-economic conditions emerged. Aerial images and 1:10,000 topographic maps were used for the detailed analysis. Also changes in traffic intensities according to the National Traffic Census were explored. The next step was field visits to evaluate the permeability of existing transport infrastructure and other barriers in the landscape based on the principles and recommendations from the Wildlife and Traffic in the Carpathians handbook and new national Methodology of environmental audit. Estimation of future development was investigated by evaluating existing spatial-planning documentation. A selection of examples of good and bad practice will accompany the paper
- …