The salience of sport in cross-race friendship selection

In response to growing racial concerns, stakeholders have called for programs that facilitate positive cross-race interactions. Adolescence has been targeted as the most effective life stage to initiate programs promoting relationships. Since schools are one of the primary social influences on adolescent development, they have been emphasized as a particularly important setting for promoting intergroup contact. Sport plays an important role in the experiences of students, and contributes to intergroup relations within a school. The purpose of this study is to examine the unique effect of sport participation on cross-race friendship selection. Using data from Wave I of The National Longitudinal Study of Adolescent Health (Add Health), mixed-effects regression models and analysis of variance (ANOVA) were used to assess the effects of sport participation on friendship heterogeneity. Overall, participation in sport activities did not significantly influence the racial heterogeneity of adolescent’s friendship networks

Satellite assessment of land surface evapotranspiration for the pan-Arctic domain

Regional evapotranspiration (ET), including water loss from plant transpiration and soil evaporation, is essential to understanding interactions between land-atmosphere surface energy and water balances. Vapor pressure deficit (VPD) and surface air temperature are key variables for stomatal conductance and ET estimation. We developed an algorithm to estimate ET using the Penman-Monteith approach driven by Moderate Resolution Imaging Spectroradiometer (MODIS)-derived vegetation data and daily surface meteorological inputs including incoming solar radiation, air temperature, and VPD. The model was applied using alternate daily meteorological inputs, including (1) site level weather station observations, (2) VPD and air temperature derived from the Advanced Microwave Scanning Radiometer (AMSR-E) on the EOS Aqua satellite, and (3) Global Modeling and Assimilation Office (GMAO) reanalysis meteorology-based surface air temperature, humidity, and solar radiation data. Model performance was assessed across a North American latitudinal transect of six eddy covariance flux towers representing northern temperate grassland, boreal forest, and tundra biomes. Model results derived from the three meteorology data sets agree well with observed tower fluxes (r \u3e 0.7; P \u3c 0.003; root mean square error of latent heat flux \u3c30 W m−2) and capture spatial patterns and seasonal variability in ET. The MODIS-AMSR-E–derived ET results also show similar accuracy to ET results derived from GMAO, while ET estimation error was generally more a function of algorithm parameterization than differences in meteorology drivers. Our results indicate significant potential for regional mapping and monitoring daily land surface ET using synergistic information from satellite optical IR and microwave remote sensing

Downbeat Nystagmus in a 7-Year-Old Girl with Epstein-Barr Virus-Associated Meningitis and Cerebellitis

Downbeat nystagmus is a type of jerk nystagmus that may be seen in patients with lesions affecting the vestibulocerebellum. This is a case of a 7-year-old girl presenting with a history of fever, headache, and episodic vertigo with downbeat nystagmus. The diagnosis of Epstein-Barr virus meningitis with acute cerebellitis was made by contrast magnetic resonance imaging, cerebrospinal fluid analysis, and serum Epstein-Barr virus titers. Contrast magnetic resonance imaging demonstrated enhancement of the meninges and inferior cerebellar folia, correlating with the neuroophthalmological symptom of downbeat nystagmus

Evaluation of MERRA Land Surface Estimates in Preparation for the Soil Moisture Active Passive Mission

The authors evaluated several land surface variables from the Modern-Era Retrospective Analysis for Research and Applications (MERRA) product that are important for global ecological and hydrological studies, including daily maximum (Tmax) and minimum (Tmin) surface air temperatures, atmosphere vapor pressure deficit (VPD), incident solar radiation (SWrad), and surface soil moisture. The MERRA results were evaluated against in situ measurements, similar global products derived from satellite microwave [the Advanced Microwave Scanning Radiometer for Earth Observing System (EOS) (AMSR-E)] remote sensing and earlier generation atmospheric analysis [Goddard Earth Observing System version 4 (GEOS-4)] products. Relative to GEOS-4, MERRA is generally warmer (~0.5°C for Tmin and Tmax) and drier (~50 Pa for VPD) for low- and middle-latitude regions (\u3c50°N) associated with reduced cloudiness and increased SWrad. MERRA and AMSR-E temperatures show relatively large differences (\u3e3°C) in mountainous areas, tropical forest, and desert regions. Surface soil moisture estimates from MERRA (0–2-cm depth) and two AMSR-E products (~0–1-cm depth) are moderately correlated (R ~ 0.4) for middle-latitude regions with low to moderate vegetation biomass. The MERRA derived surface soil moisture also corresponds favorably with in situ observations (R = 0.53 ± 0.01, p \u3c 0.001) in the midlatitudes, where its accuracy is directly proportional to the quality of MERRA precipitation. In the high latitudes, MERRA shows inconsistent soil moisture seasonal dynamics relative to in situ observations. The study’s results suggest that satellite microwave remote sensing may contribute to improved reanalysis accuracy where surface meteorological observations are sparse and in cold land regions subject to seasonal freeze–thaw transitions. The upcoming NASA Soil Moisture Active Passive (SMAP) mission is expected to improve MERRA-type reanalysis accuracy by providing accurate global mapping of freeze–thaw state and surface soil moisture with 2–3-day temporal fidelity and enhanced (≤9 km) spatial resolution

Shockwave/Boundary-Layer Interaction Studies Performed in the NASA Langley 20-Inch Mach 6 Air Tunnel

This paper highlights results from a collaborative study performed by The University of Tennessee Space Institute (UTSI) and NASA Langley Research Center on the Shockwave/Boundary-Layer Interaction (SWBLI) generated by a cylindrical protuberance on a flat plate in a Mach 6 flow. The study was performed in the 20-Inch Mach 6 Air Tunnel at NASA Langley Research Center and consisted of two separate entries. In the first entry, simultaneous high-speed schlieren and high-speed pressure-sensitive paint (PSP) imaging which was performed for the first time in the 20-Inch Mach 6 facility at NASA Langley were performed as well as simultaneous high-speed schlieren and oil-flow imaging. In the second entry, the model configuration was modified to increase the size of the interaction region. High-speed schlieren and infrared thermography (IR) surface imaging were performed in this second entry. The goal of these tests was to characterize the SBLI in the presence of a laminar, transitional, and turbulent boundary layer using high-speed optical imaging techniques. AoA = sting angle-of-attack () dcylinder = cylinder diameter (mm) dtrip = cylindrical tripping element diameter (mm) shock = shock stand-off distance (mm) hcylinder = cylinder height (mm) htrip = cylindrical tripping element height (mm) HSS = high-speed schlieren M = freestream Mach number PSP = pressure-sensitive paint Re = freestream unit Reynolds number (m-1) SWBLI = shockwave/boundary-layer interaction plate = model plate angle () Introduction his paper highlights two experimental entries performed in the 20-Inch Mach 6 Air Blowdown Tunnel at NASA Langley Research Center in collaboration with The University of Tennessee Space Institute (UTSI). The purpose of these entries was to characterize the dynamic shockwave/boundary-layer interaction (SWBLI) between a vertical cylinder on a flat plate and laminar, transitional (XSWBLI), and turbulent (SWTBLI) boundary layers with a freestream Mach number of 6 using non-intrusive optical diagnostics. Experiments performed by Murphree et al.1,2 were among the first to specifically characterize XSWBLI induced by a vertical cylinder on a flat plate geometry using several optical measurement techniques. Recent optical studies of XSWBLI phenomenon have been performed by UTSI at Mach 2 in their low-enthalpy blow wind tunnel3-8 and by Texas A&M University and UTSI at Mach numbers of 6 and 7 in their Adjustable Contour Expansion wind tunnel.9 The experiments described in this paper were intended to complement previous studies by expanding the freestream unit Reynolds number range, Re, over which the XSWBLI phenomena has been observed. Additionally these experiments, made possible under NASAs new facility funding model under the Aeronautics Evaluation and Test Capabilities (AETC) project, promoted collaboration between university and NASA researchers. The initial entry in the 20-Inch Mach 6 Air Tunnel at NASA Langley occurred in December of 2016. Originally, testing was to occur in November of 2016 in the 31-Inch Mach 10 Air Tunnel at NASA Langley. This facility was chosen so that the XSWBLI phenomenon could be observed at much higher Mach numbers than had previously been attempted in ground test experiments. The model selected for this experiment, a 10 half-angle wedge with a sharp leading edge (described in detail in section II.B), had previously been used by Danehy et al. [10] for boundary layer transition studies using the nitric oxide planar laser-induced fluorescence (NO PLIF) flow visualization technique. In that work, it was determined that transition could be induced downstream of a single htrip = 1-mm tall, dtrip = 4-mm diameter cylindrical tripping element and that the streamwise location of the transition could be changed for a single Re by changing the model angle-of-attack (AoA) (see Fig. A3 in Ref. [10] for more details). Based on the findings of that work, a decision was made to use the wedge model with the cylindrical tripping element to trip the boundary layer flow ahead of a cylindrical protuberance in order to achieve a XSWBLI. Unfortunately, the 31-Inch Mach 10 facility had been taken offline for repairs in October of 2016 and a decision was made to move the test to the 20-Inch Mach 6 facility. Since the behavior of the boundary layer with the chosen model configuration had not been studied before in that facility and the available test time was limited, the entry was considered to be exploratory and was used to collect spatially-resolved and time-resolved flow and surface visualization data that would be used to inform a second entry. Test techniques included simultaneous high-speed schlieren (HSS) captured at 160 kHz and high-speed pressure sensitive paint captured at 10 kHz as well as oil flow visualization, captured at 750 Hz. The second entry in the 20-Inch Mach 6 facility occurred in June and July of 2017. In this follow-on test, modifications to the wind tunnel model were made based on observations made during the first entry and included removing the cylindrical tripping element, increasing the size of the cylinder used to induce the SWBLI to increase the size of the interaction while simultaneously improving spatial resolution, and using a swept ramp array, similar to that described in Ref. [11], to trip the flow to turbulence. Simultaneous HSS (captured at 140 kHz, 100 kHz, and 40 kHz) and conventional IR thermography (captured at 30 Hz) imaging were performed simultaneously in this follow-on entry. This paper is intended to serve as a summary of the work performed during these two entries, to detail lessons learned from each entry, and to highlight some of the datasets acquired. Details on the experimental setup, model configuration, and techniques used are provided. Papers providing a more rigorous analysis of data acquired during the second entry, including statistical, spectral, and modal decomposition methods, can be found in Refs. [12,13]. An entry examining XSWBLI in the 31-Inch Mach 10 Blowdown Wind Tunnel facility is currently planned for mid-to-late calendar year 2019, pending the success of facility repairs. The work performed and described in this paper and the upcoming entry in the 31-Inch Mach 10 facility at NASA Langley have been made possible by NASAs new facility funding model under the Aeronautics Evaluation and Test Capabilities (AETC) project. Wind Tunnel Facility All experiments discussed in this paper were performed in the 20-Inch Mach 6 Air Tunnel at NASA Langley Research Center. Specific details pertaining to this facility can be found in Refs. [14,15], with only a brief description of the facility provided here. For both entries, the nominal freestream unit Reynolds number was varied between 1.8106 m-1 (0.5106 ft-1) and 26.3106 m-1 (8106 ft-1). The nominal stagnation pressure was varied between 0.21 MPa and 3.33 MPa and the nominal stagnation temperature was varied between 480 K and 520 K to achieve the desired Re condition. For all runs, the nominal freestream Mach number was 6. The nearly square test section is 520.7-mm (20.5-inches) wide by 508-mm (20-inches) high. Two 431.8-mm (17-inch) diameter windows made of Corning 7940, Grade 5F schlieren-quality glass serve as the side walls of the tunnel and provide optical access for the high-speed schlieren measurements. A rectangular window made of the same material as the side windows served as the top wall of the test section and provided optical access for the high-speed PSP and oil flow measurements. For the second entry, this top window was replaced with a Zinc Selenide (ZnSe) window with an anti-reflection coating capable of passing IR wavelengths between 8m and 12m with greater than 98% transmittance. The model was sting supported by a strut attached to a hydraulic system that allows for the model pitch angle to be adjusted between -5 to +55. For the first entry, an initial pitch/pause sweep of the model AoA was performed to observe the resulting SWBLI. Ultimately, however, the sting pitch angle for this entry was fixed at +10.0 so that the angle of the top surface of the wedge relative to the streamwise axis of the tunnel (referred to herein as the plate angle, plate), was plate = 0. For the second entry, plate = 0 and plate = -13.25 were initially tested with the swept ramp array (discussed in the following section) to determine which orientation produced conditions most favorable for XSWBLI to occur based on the heating signatures observed over the top surface of the model in the IR thermography images. Based on these initial tests, plate = -13.25 was set for the remainder of the runs in the second entry. For both entries, any model changes were performed in a housing located beneath the closed test section. Prior to performing a run of the tunnel, the housing was sealed and the tunnel started. Once the appropriate freestream conditions were achieved, the model was injected into the test section using a hydraulic injection system. B. Model Geometry For all runs, a 10 half-angle (20 full-angle) wedge model with a sharp leading edge was used. The model is described in detail in Refs. [10,16]. The top surface of the sharp leading edge of the model extended 47.8 mm from its upstream-most edge to a junction with the upstream edge of a stainless steel top plate that then extended an (a) (c) (b) Fig. 1 (a) Schematic of top surface of wedge model with gas seeding insert, (b) perspective view of the model in the 20-Inch Mach 6 tunnel with centerline pressure orifices on sharp leading edge, and (c) a perspective view of the model with stainless steel (top) and SLA middle insert (bottom) during the first entry. Flow occurs from left to right

Artificial Light Increases Local Predator Abundance, Predation Rates, and Herbivory.

Human activity is rapidly increasing the radiance and geographic extent of artificial light at night (ALAN) leading to alterations in the development, behavior, and physiological state of many organisms. A limited number of community-scale studies investigating the effects of ALAN have allowed for spatial aggregation through positive phototaxis, the commonly observed phenomenon of arthropod movement toward light. We performed an open field study (without restricted arthropod access) to determine the effects of ALAN on local arthropod community composition, plant traits, and local herbivory and predation rates. We found strong positive phototaxis in 10 orders of arthropods, with increased (159% higher) overall arthropod abundance under ALAN compared to unlit controls. The arthropod community under ALAN was more diverse and contained a higher proportion of predaceous arthropods (15% vs 8%). Predation of immobilized flies occurred 3.6 times faster under ALAN; this effect was not observed during the day. Contrary to expectations, we also observed a 6% increase in herbivory under ALAN. Our results highlight the importance of open experimental field studies in determining community-level effects of ALAN

Consumption of New Zealand blackcurrant extract improves recovery from exercise-induced muscle damage in non-resistance trained men and women: A double-blind randomised trial

Background: Blackcurrant is rich in anthocyanins that may protect against exercise-induced muscle damage (EIMD) and facilitate a faster recovery of muscle function. We examined the effects of New Zealand blackcurrant (NZBC) extract on indices of muscle damage and recovery following a bout of strenuous isokinetic resistance exercise. Methods: Using a double-blind, randomised, placebo controlled, parallel design, twenty-seven healthy participants received either a 3 g·day−1 NZBC extract (n = 14) or the placebo (PLA) (n = 13) for 8 days prior to and 4 days following 60 strenuous concentric and eccentric contractions of the biceps brachii muscle on an isokinetic dynamometer. Muscle soreness (using a visual analogue scale), maximal voluntary contraction (MVC), range of motion (ROM) and blood creatine kinase (CK) were assessed before (0 h) and after (24, 48, 72 and 96 h) exercise. Results: Consumption of NZBC extract resulted in faster recovery of baseline MVC (p = 0.04), attenuated muscle soreness at 24 h (NZBC: 21 ± 10 mm vs. PLA: 40 ± 23 mm, p = 0.02) and 48 h (NZBC: 22 ± 17 vs. PLA: 44 ± 26 mm, p = 0.03) and serum CK concentration at 96 h (NZBC: 635 ± 921 UL vs. PLA: 4021 ± 4319 UL, p = 0.04) following EIMD. Conclusions: Consumption of NZBC extract prior to and following a bout of eccentric exercise attenuates muscle damage and improves functional recovery. These findings are of practical importance in recreationally active and potentially athletic populations, who may benefit from accelerated recovery following EIMD

Trapped: Experiences of unpaid carers of clinically vulnerable people "shielding" during the coronavirus disease 2019 pandemic

This is the final version. Available from SAGE Publications via the DOI in this record. Summary: Unpaid carers were profoundly impacted by the coronavirus disease 2019 pandemic and public health responses. In the UK, in March 2020, people identified as clinically extremely vulnerable and their household members were advised to “shield” for an initial 12-week period, which meant minimizing all contacts from outside the household and not leaving the house at all, unless in an emergency. In a modified form, shielding guidance remained in place until August 2020 and was reinstituted from December 2020 until April 1, 2021. This article, reporting on qualitative interviews with 47 unpaid carers in Wales, thematically analyzed using a coding framework, explores the experiences of unpaid carers affected by this shielding guidance and their wider implications for social work with unpaid carers in the future. Findings: Participants in our study described ways in which their caring role expanded, due to the need to provide additional practical and emotional support for loved ones who were shielding, and who lost access to other avenues of support. Some also described their caring role as becoming more involved and complex due to the declining health or self-care capacity of the person cared-for as a direct consequence of shielding restrictions. Alongside the increase in their caring responsibilities, carers reported losing access to important avenues of support for their own well-being. Applications: We draw on ecological systems theory to highlight the importance during care planning and management of exploring the carer's mesosystem to identify and optimize sustaining forces, and of attending to the microsystem involving the carer and person cared-for.Public Health Wale

Using Patient-Specific 3D Modeling and Simulations to Optimize Microwave Ablation Therapy for Liver Cancer

Microwave ablation (MWA) of liver tumors presents challenges like under- and over-ablation, potentially leading to inadequate tumor destruction and damage to healthy tissue. This study aims to develop personalized three-dimensional (3D) models to simulate MWA for liver tumors, incorporating patient-specific characteristics. The primary objective is to validate the predicted ablation zones compared to clinical outcomes, offering insights into MWA before therapy to facilitate accurate treatment planning. Contrast-enhanced CT images from three patients were used to create 3D models. The simulations used coupled electromagnetic wave propagation and bioheat transfer to estimate the temperature distribution, predicting tumor destruction and ablation margins. The findings indicate that prolonged ablation does not significantly improve tumor destruction once an adequate margin is achieved, although it increases tissue damage. There was a substantial overlap between the clinical ablation zones and the predicted ablation zones. For patient 1, the Dice score was 0.73, indicating high accuracy, with a sensitivity of 0.72 and a specificity of 0.76. For patient 2, the Dice score was 0.86, with a sensitivity of 0.79 and a specificity of 0.96. For patient 3, the Dice score was 0.8, with a sensitivity of 0.85 and a specificity of 0.74. Patient-specific 3D models demonstrate potential in accurately predicting ablation zones and optimizing MWA treatment strategies