Volcanic ash as a resource for future research on Earth and the Moon

When a volcano erupts, it is often associated with destruction, particularly damage to infrastructure and loss of life. But these natural events also offer unexpected research opportunities, leading to serendipitous discoveries. This was the case for the volcanic events that made the headlines during 19 September to 25 December 2021, on the Canarian Island of La Palma. Rather than viewing the voluminous ash that erupted as a waste material needing to be removed as soon as possible, we saw the many possibilities that this remarkable material could offer science and engineering. Sustainability is a word that is commonly used in connection with geology these days. Here we present some possibilities of how the La Palma ash can be re‐purposed for use on this planet but also help us to develop new ideas for the future living on the Moon

Magma-Crust Interaction at Subduction Zone Volcanoes

The focus of this work is magma-crust interaction processes and associated crustal volatile release in subduction zone volcanoes, drawing on rock, mineral, and gas geochemistry as well as experimental petrology. Understanding the multitude of differentiation processes that modify an original magma during ascent to the surface is vital to unravel the contributions of the various sources that contribute to the final magmas erupted at volcanoes. In particular, magma-crust interaction (MCI) processes have been investigated at a variety of scales, from a local scale in the Vesuvius, Merapi, and Kelut studies, to a regional scale, in the Java to Bali segment of the Sunda Arc.  The role of crustal influences is still not well constrained in subduction systems, particulary in terms of the compositional impact of direct magma crust interplay. To address this shortcoming, we studied marble and calc-silicate (skarn) xenoliths, and used high resolution short timescale experimental petrology at Vesuvius volcano. The marbles and calc-silicates help to identify different mechanisms of magma-carbonate and magma-xenolith interaction, and the subsequent effects of volatile release on potential eruptive behaviour, while sequential short-duration experiments simulate the actual processes of carbonate assimilation employing natural materials and controlled magmatic conditions. The experiments highlight the efficiency of carbonate assimilation and associated carbonate-derived CO2 liberated over short timescales. The findings at Merapi and Kelut demonstrate a complex magmatic plumbing system underneath these volcanoes with magma residing at different depths, spanning from the mantle-crust boundary to the upper crust. The erupted products and volcanic gas emissions enable us to shed light on MCI-processes and associated volatile release in these systems. The knowledge gained from studying individual volcanoes (e.g., Merapi and Kelut) is then tested on a regional scale and applied to the entire Java and Bali arc segment. An attempt is presented to distinguish the extent of source versus crustal influences and establish a quantitative model of late stage crustal influence in this arc segment. This thesis therefore hopes to contribute to our knowledge of magma genesis and magma-crust interaction (MCI) processes that likely operate in subduction zone systems worldwide.

Magma-Crust Interaction at Subduction Zone Volcanoes

The focus of this work is magma-crust interaction processes and associated crustal volatile release in subduction zone volcanoes, drawing on rock, mineral, and gas geochemistry as well as experimental petrology. Understanding the multitude of differentiation processes that modify an original magma during ascent to the surface is vital to unravel the contributions of the various sources that contribute to the final magmas erupted at volcanoes. In particular, magma-crust interaction (MCI) processes have been investigated at a variety of scales, from a local scale in the Vesuvius, Merapi, and Kelut studies, to a regional scale, in the Java to Bali segment of the Sunda Arc.  The role of crustal influences is still not well constrained in subduction systems, particulary in terms of the compositional impact of direct magma crust interplay. To address this shortcoming, we studied marble and calc-silicate (skarn) xenoliths, and used high resolution short timescale experimental petrology at Vesuvius volcano. The marbles and calc-silicates help to identify different mechanisms of magma-carbonate and magma-xenolith interaction, and the subsequent effects of volatile release on potential eruptive behaviour, while sequential short-duration experiments simulate the actual processes of carbonate assimilation employing natural materials and controlled magmatic conditions. The experiments highlight the efficiency of carbonate assimilation and associated carbonate-derived CO2 liberated over short timescales. The findings at Merapi and Kelut demonstrate a complex magmatic plumbing system underneath these volcanoes with magma residing at different depths, spanning from the mantle-crust boundary to the upper crust. The erupted products and volcanic gas emissions enable us to shed light on MCI-processes and associated volatile release in these systems. The knowledge gained from studying individual volcanoes (e.g., Merapi and Kelut) is then tested on a regional scale and applied to the entire Java and Bali arc segment. An attempt is presented to distinguish the extent of source versus crustal influences and establish a quantitative model of late stage crustal influence in this arc segment. This thesis therefore hopes to contribute to our knowledge of magma genesis and magma-crust interaction (MCI) processes that likely operate in subduction zone systems worldwide.

Magma-Crust Interaction at Subduction Zone Volcanoes

The focus of this work is magma-crust interaction processes and associated crustal volatile release in subduction zone volcanoes, drawing on rock, mineral, and gas geochemistry as well as experimental petrology. Understanding the multitude of differentiation processes that modify an original magma during ascent to the surface is vital to unravel the contributions of the various sources that contribute to the final magmas erupted at volcanoes. In particular, magma-crust interaction (MCI) processes have been investigated at a variety of scales, from a local scale in the Vesuvius, Merapi, and Kelut studies, to a regional scale, in the Java to Bali segment of the Sunda Arc.  The role of crustal influences is still not well constrained in subduction systems, particulary in terms of the compositional impact of direct magma crust interplay. To address this shortcoming, we studied marble and calc-silicate (skarn) xenoliths, and used high resolution short timescale experimental petrology at Vesuvius volcano. The marbles and calc-silicates help to identify different mechanisms of magma-carbonate and magma-xenolith interaction, and the subsequent effects of volatile release on potential eruptive behaviour, while sequential short-duration experiments simulate the actual processes of carbonate assimilation employing natural materials and controlled magmatic conditions. The experiments highlight the efficiency of carbonate assimilation and associated carbonate-derived CO2 liberated over short timescales. The findings at Merapi and Kelut demonstrate a complex magmatic plumbing system underneath these volcanoes with magma residing at different depths, spanning from the mantle-crust boundary to the upper crust. The erupted products and volcanic gas emissions enable us to shed light on MCI-processes and associated volatile release in these systems. The knowledge gained from studying individual volcanoes (e.g., Merapi and Kelut) is then tested on a regional scale and applied to the entire Java and Bali arc segment. An attempt is presented to distinguish the extent of source versus crustal influences and establish a quantitative model of late stage crustal influence in this arc segment. This thesis therefore hopes to contribute to our knowledge of magma genesis and magma-crust interaction (MCI) processes that likely operate in subduction zone systems worldwide.

Interaction between high-temperature magmatic fluids and limestone explains 'Bastnäs-type' REE deposits in central Sweden

The presently increasing demand for rare earth elements (REE), particularly in high-tech and "green energy" applications, has led to global interest in the distribution, origins and formation conditions of REE deposits. The World's first hard-rock REE sources, the polymetallic deposits of Bastnasfaltet in Bergslagen, central Sweden, were also the place of the original discovery of several REE and many of their host minerals. Similar deposits with high concentrations of REE occur along a >100 km corridor in the region and they share a number of geological and mineralogical features; all comprising Palaeoproterozoic, skarn-hosted magnetite-REE mineralisation of ambiguous origin. Here we report oxygen isotope data for magnetite and quartz, and oxygen and carbon isotope data for carbonates from ten of these classic deposits, to model and assess their mode of origin. Combined with existing geological observations, the isotope results support an origin in a c. 1.9 Ga shallow-marine back-arc, sub-seafloor setting, where felsic magmatic-sourced, high-temperature fluids reacted with pre-existing limestone interlayers, leading to localised skarn formation and magnetite-REE-mineral precipitation. These findings help us to better understand the geological processes that have produced economic REE mineralisation and may assist future exploration for these critical commodities

Multi-level magma plumbing at Agung and Batur volcanoes increases risk of hazardous eruptions

The island of Bali in Indonesia is home to two active stratovolcanoes, Agung and Batur, but relatively little is known of their underlying magma plumbing systems. Here we define magma storage depths and isotopic evolution of the 1963 and 1974 eruptions using mineral-melt equilibrium thermobarometry and oxygen and helium isotopes in mineral separates. Olivine crystallised from a primitive magma and has average delta O-18 values of 4.8%. Clinopyroxene records magma storage at the crust-mantle boundary, and displays mantle-like isotope values for Helium (8.62 R-A) and delta O-18 (5.0-5.8%). Plagioclase reveals crystallisation in upper crustal storage reservoirs and shows delta O-18 values of 5.5-6.4%. Our new thermobarometry and isotope data thus corroborate earlier seismic and InSAR studies that inferred upper crustal magma storage in the region. This type of multi-level plumbing architecture could drive replenishing magma to rapid volatile saturation, thus increasing the likelihood of explosive eruptions and the consequent hazard potential for the population of Bali

Detecting radioactive particles in complex environmental samples using real-time autoradiography

International audienceRadioactive particles often contain very high radioactivity concentrations and are widespread. They pose a potential risk to human health and the environment. Their detection, quantification, and characterization are crucial if we are to understand their impact. Here, we present the use of a real-time autoradiography gaseous detector (using parallel ionization multiplier) to expedite and improve the accuracy of radioactive particle screening in complex environmental samples. First, standard particles were used to assess the detector capabilities (spatial resolution, spectrometry, and artefact contributions), then, we applied the technique to more complex and environmentally relevant samples. The real-time autoradiography technique provides data with a spatial resolution (≲100 µm) suitable for particle analysis in complex samples. Further, it can differentiate between particles predominantly emitting alpha and beta radiation. Here, the technique is applied to radioactive cesium-rich microparticles collected from the Fukushima Daiichi nuclear exclusion zone, showing their accurate detection, and demonstrating the viability of real-time autoradiography in environmental scenarios. Indeed, for more complex samples (radioactive particles in a less radioactive heterogeneous background mix of minerals), the technique permits relatively high selectivity for radioactive particle screening (up to 61.2% success rate) with low false positive percentages (~ 1%)

The Recycling of End-of-Life Lithium-Ion Batteries and the Phase Characterisation of Black Mass

Black mass is the industry term applied to end-of-life (EoL) lithium-ion batteries that have been mechanically processed for potential use as a recycled material to recover the valuable metals present, including cobalt, lithium, manganese, nickel and copper. A significant challenge to the effective processing of black mass is the complexity of the feed material. Two samples of black mass from a European source were analysed using a combination of methods including automated SEM-EDS (AMICS) to characterise and quantify the phases present and particle chemistry. Micro X-CT imaging, overlain onto automated mineralogy images, enabled the 3D morphology of the particles to be determined. Micro-XRF was used to map the copper, nickel, manganese and cobalt-bearing phases. Since Li cannot be detected using SEM-EDS, its abundance was semi-quantified using laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS). The integration of these complimentary analytical methods allowed for detailed phase characterisation, which may guide the potential hydrometallurgical or pyrometallurgical recycling routes and chemical assaying