738 research outputs found
Exploring Agricultural Production Systems and Their Fundamental Components with System Dynamics Modelling
Agricultural production in the United States is undergoing marked changes due to rapid shifts in consumer demands, input costs, and concerns for food safety and environmental impact. Agricultural production systems are comprised of multidimensional components and drivers that interact in complex ways to influence production sustainability. In a mixed-methods approach, we combine qualitative and quantitative data to develop and simulate a system dynamics model that explores the systemic interaction of these drivers on the economic, environmental and social sustainability of agricultural production. We then use this model to evaluate the role of each driver in determining the differences in sustainability between three distinct production systems: crops only, livestock only, and an integrated crops and livestock system. The result from these modelling efforts found that the greatest potential for sustainability existed with the crops only production system. While this study presents a stand-alone contribution to sector knowledge and practice, it encourages future research in this sector that employs similar systems-based methods to enable more sustainable practices and policies within agricultural production
Physicochemical Properties and Catalytic Behavior of the Molecular Sieve SSZ-70
SSZ-70 is synthesized using 1,3-bis(isobutyl)imidazolium, 1,3-bis(cyclohexyl)imidazolium, and 1,3-bis(cycloheptyl)imidazolium structure directing agents (SDAs), and the solids obtained are characterized by powder X-ray diffraction (XRD), ^(29)Si magic angle spinning nuclear magnetic resonance (MAS NMR), electron microscopy, nitrogen and hydrocarbon adsorption, and thermogravimetric analyses. The physicochemical properties of SSZ-70 show that it is a new molecular sieve that has similarities to MWW-type materials. The catalytic behavior of SSZ-70 is evaluated through the use of the constraint index (CI) test. Distinct differences in the reactivity between Al-SSZ-70 and SSZ-25 (MWW) are observed and are the consequences of the structural differences between these two molecular sieves
Biomimetic direction of arrival estimation for resolving front-back confusions in hearing aids
Sound sources at the same angle in front or behind a two-microphone array (e.g., bilateral hearing aids) produce the same time delay and two estimates for the direction of arrival: A front-back confusion. The auditory system can resolve this issue using head movements. To resolve front-back confusion for hearing-aid algorithms, head movement was measured using an inertial sensor. Successive time-delay estimates between the microphones are shifted clockwise and counterclockwise by the head movement between estimates and aggregated in two histograms. The histogram with the largest peak after multiple estimates predicted the correct hemifield for the source, eliminating the front-back confusions
A conceptual model for glaciogenic reservoirs : from landsystems to reservoir architecture
Acknowledgements Authors would like to thank Benjamin Bellwald, Daniel Le Heron and one anonymous reviewer for their insightful comments and suggestions which helped to improve the manuscript. Funding This manuscript contains work conducted during a PhD study undertaken as part of the Natural Environment Research Council (NERC) Centre for Doctoral Training (CDT) in Oil & Gas [grant number NEM00578X/1]. It is sponsored by The University of Aberdeen University via their Scholarship Scheme.Peer reviewedPostprin
Late-seeded cover crops in a semiarid environment: overyielding, dominance and subsequent crop yield
Interest in cover crops is increasing but information is limited on integrating them into crop rotations especially in the relatively short growing season on the northern Great Plains. A 3-yr research project, initiated in 2009 near Mandan, North Dakota, USA, evaluated (1) what impact cover crops may have on subsequent cash crops yields and (2) whether cover crop mixtures are more productive and provide additional benefits compared to cover crop monocultures. The study evaluated 18 different cover crop monocultures and mixtures that were seeded in August following dry pea (Pisum sativum L.). The following year, spring wheat (Triticum aestivum L.), corn (Zea mays L.), soybean (Glycine max L.) and field pea were seeded into the different cover crop treatments and a non-treated control. A lack of timely precipitation in 2009 resulted in a low cover crop yield of 17 g m2 compared to 100 and 77 g m2 in 2008 and 2010, respectively. Subsequent cash crop yield was not affected by late-seeded cover crops. Cool-season cover crop monocultures were more productive than warm-season mono-cultures and some mixtures in 2008 and 2010. Relative yield total did not differ from one in any cover crop mixture suggesting that overyielding did not occur. Species selection rather than species diversity was the most important contributor to cover crop yield. Cover crops can be grown following short-season cash crops in the northern Great Plains, but precipitation timing and species selection are critical
Mutations and Binding Sites of Human Transcription Factors
Mutations in any genome may lead to phenotype characteristics that determine ability of an individual to cope with adaptation to environmental challenges. In studies of human biology, among the most interesting ones are phenotype characteristics that determine responses to drug treatments, response to infections, or predisposition to specific inherited diseases. Most of the research in this field has been focused on the studies of mutation effects on the final gene products, peptides, and their alterations. Considerably less attention was given to the mutations that may affect regulatory mechanism(s) of gene expression, although these may also affect the phenotype characteristics. In this study we make a pilot analysis of mutations observed in the regulatory regions of 24,667 human RefSeq genes. Our study reveals that out of eight studied mutation types, “insertions” are the only one that in a statistically significant manner alters predicted transcription factor binding sites (TFBSs). We also find that 25 families of TFBSs have been altered by mutations in a statistically significant manner in the promoter regions we considered. Moreover, we find that the related transcription factors are, for example, prominent in processes related to intracellular signaling; cell fate; morphogenesis of organs and epithelium; development of urogenital system, epithelium, and tube; neuron fate commitment. Our study highlights the significance of studying mutations within the genes regulatory regions and opens way for further detailed investigations on this topic, particularly on the downstream affected pathways
Quantifying traces of tool use: a novel morphometric analysis of damage patterns on percussive tools
Percussive technology continues to play an increasingly important role in understanding the evolution of tool use. Comparing the archaeological record with extractive foraging behaviors in nonhuman primates has focused on percussive implements as a key to investigating the origins of lithic technology. Despite this, archaeological approaches towards percussive tools have been obscured by a lack of standardized methodologies. Central to this issue have been the use of qualitative, non-diagnostic techniques to identify percussive tools from archaeological contexts. Here we describe a new morphometric method for distinguishing anthropogenically-generated damage patterns on percussive tools from naturally damaged river cobbles. We employ a geomatic approach through the use of three-dimensional scanning and geographical information systems software to statistically quantify the identification process in percussive technology research. This will strengthen current technological analyses of percussive tools in archaeological frameworks and open new avenues for translating behavioral inferences of early hominins from percussive damage patterns.Palaeontological Scientific Trust; National Research Foundation; National Science Foundation [BCS-1128170, BCS-0924476]; Integrative Graduate Education and Research Traineeship Program [DGE-0801634]; George Washington University's Selective Excellence Fund; George Washington University Columbian College Facilitating Fund; Clare Hall College [JRF]; Newnham College [Gibbs Travelling Fellowship] Cambridge; European Research Council [283959]info:eu-repo/semantics/publishedVersio
Biomass round bales infield aggregation logistics scenarios
Biomass bales often need to be aggregated (collected into groups and transported) to a field-edge stack or a temporary storage before utilization. Several logistics scenarios for aggregation involving equipment and aggregation strategies were modeled and evaluated. Cumulative Euclidean distance criteria evaluated the various aggregation scenarios. Application of a single-bale loader that aggregated bales individually was considered as the “control” scenario with which others were compared. A computer simulation program developed determined bale coordinates in ideal and random layouts that evaluated aggregation scenarios. Simulation results exhibited a “diamond pattern” of bales on ideal layout and a “random pattern” emerged when ≥ 10% variation was introduced. Statistical analysis revealed that the effect of field shape, swath width, biomass yield, and randomness on bale layout did not affect aggregation logistics, while area and number of bales handled had significant effects. Number of bales handled in the direct method significantly influenced the efficiency. Self-loading bale picker with minimum distance path (MDP, 80%) and parallel transport of loader and truck with MDP (78%) were ranked the highest, and single-bale central grouping the lowest (29%) among 19 methods studied. The MDP was found significantly more efficient (4%-16%) than the baler path. Simplistic methods, namely a direct triple-bale loader with MDP (64%-66%), or a loader and truck handling six bales running parallel with MDP (75%-82%) were highly efficient. Great savings on cumulative distances that directly influence time, fuel, and cost were realized when the number of bales handled was increased or additional equipment was utilized
Syntheses, characterization, density functional theory calculations, and activity of tridentate SNS zinc pincer complexes based on bis-imidazole or bis-triazole precursors
A series of tridentate pincer ligands, each possessing two sulfur- and one nitrogen-donor functionalities (SNS), based on bis-imidazole or bis-triazole salts were metallated with ZnCl2 to give new tridentate SNS pincer zinc(II) complexes [(SNS)ZnCl]+. The zinc complexes serve as models for the zinc active site in liver alcohol dehydrogenase (LADH) and were characterized with single crystal X-ray diffraction, 1H, 13C, and HSQC NMR spectroscopies, electrospray mass spectrometry, and elemental analysis. The zinc complexes feature SNS donor atoms and pseudotetrahedral geometry about the zinc center, as is seen for liver alcohol dehydrogenase. The bond lengths and bond angles of the zinc complexes correlate well to those in horse LADH. The SNS ligand precursors were characterized with 1H, 13C, and HSQC NMR spectroscopies, elemental analysis, and cyclic voltammetry, and were found to be redox active. Gaussian calculations were performed and agree with the experimentally observed oxidation potentials for the pincer ligand precursors. The zinc complexes were screened for the reduction of electron-poor aldehydes in the presence of a hydrogen donor, 1-benzyl-1,4-dihydronicotinamide (BNAH), and it was determined that they enhance the reduction of electron-poor aldehydes. The SNS zinc pincer complexes with bis-triazole ligand precursors exhibit higher activity for the reduction of 4-nitrobenzaldehyde than do SNS zinc pincer complexes with bis-imidazole ligand precursors. Quantitative stoichiometric conversion was seen for the reduction of pyridine-2-carboxaldehyde via SNS zinc pincer complexes with either bis-imidazole or bis-triazole ligand precursors
Synthesis, Characterization, Density Functional Theory Calculations, and Activity of a Thione-Containing NNN-Zinc Pincer Complex Based on a Bis-triazole Precursor
A novel ambidentate tridentate pincer ligand based on a bis-triazole precursor, was prepared, characterized, and metallated with ZnCl2 to give a new tridentate NNN-bound pincer zinc(II) pincer complex: dichloro(η3-N,N,N)-[2,6-bis(3-[N-butyl]triazol-5-thione-1-yl)]pyridinezinc(II), [(NNN)ZnCl2]. This compound has pseudo-trigonal bipyramidal geometry at the zinc(II) center and exhibits metal–ligand binding that contrasts with our previously reported SNS-bound systems despite the availability of these same donor atoms in the current ligand set. The zinc complex was characterized with single crystal X-ray diffraction, 1H, 13C, and HSQC NMR spectroscopies, and electrospray mass spectrometry. The ligand precursors were characterized with 1H, 13C, and HSQC NMR spectroscopies, and cyclic voltammetry, and were found to be redox active. Density functional calculations, which investigate and support the nature of the NNN binding suggest that the experimentally observed oxidation and reduction waves are not the result of a simple one-electron process. The zinc complex was screened for the reduction of electron-poor aldehydes in the presence of a hydrogen donor, 1-benzyl-1,4-dihydronicotinamide (BNAH), and it was determined that they enhance the reduction of 4-nitrobenzaldehyde. Quantitative stoichiometric conversion was seen for the reduction of pyridine-2-carboxaldehyde
- …