Biochar for wastewater treatment – a Minireview**

Wastewater must be treated no matter if is reused or discharged into the environment. The cost of wastewater treatment may be rather high, though other solutions are sought. One of them is the application of filter materials. The filter materials have been used for removal of various pollutants in different kinds of wastewater and a wide range of filter materials (natural products, industrial waste products or man-made products) have been investigated. Among these filter materials, biochar has attracted increasing attention during the last decade. A large number of publications are devoted to production, properties and potential applications of biochar. They reveal that biochar is capable of removing pollutants of different kinds from wastewaters. A number of experiments was focused on the removal of commonly found pollutants, e.g. nutrients, heavy metals, organic matters and pharmaceuticals. It was found that the origin of the feedstock and the thermochemical treatment method are tightly connected and will have an impact on the properties of the biochar. A large number of different feedstock material like wood or wood residues, garden wastes or human and animal wastes can be transformed into biochar by torrefaction and pyrolysis. Properties of biochar will depend on transformation method. Surface area, porosity, pH, surface charge, functional groups and mineral components contribute to a vast number of mechanisms that are responsible for the metal removal, e.g. electrostatic interaction between the surface of the biochar and the specific metal, the cation exchange capacity between metals and protons and the alkaline metals on the surface of the biochar, metal complexation with functional groups and precipitation of metals that form non-soluble compounds. Biochar was successfully applied in wetlands systems to increase the removal of some targeted pollutants

Effect of organic load on phosphorus and bacteria removal from wastewater using alkaline filter materials

AbstractThe organic matter released from septic tanks can disturb the subsequent step in on-site wastewater treatment such as the innovative filters for phosphorus removal. This study investigated the effect of organic load on phosphorus (P) and bacteria removal by reactive filter materials under real-life treatment conditions. Two long-term column experiments were conducted at very short hydraulic residence times (average ∼5.5 h), using wastewater with high (mean ∼120 mg L−1) and low (mean ∼20 mg L−1) BOD7 values. Two alkaline filter materials, the calcium-silicate material Polonite and blast furnace slag (BFS), were tested for the removal capacity of total P, total organic carbon (TOC) and Enterococci. Both experiments showed that Polonite removed P significantly (p < 0.01) better than BFS. An increase in P removal efficiency of 29.3% was observed for the Polonite filter at the lower concentration of BOD7 (p < 0.05). Polonite was also better than BFS with regard to removal of TOC, but there were no significant differences between the two filter materials with regard to removal of Enterococci. The reduction in Enterococci was greater in the experiment using wastewater with high BOD7, an effect attributable to the higher concentration of bacteria in that wastewater. Overall, the results demonstrate the importance of extensive pre-treatment of wastewater to achieve good phosphorus removal in reactive bed filters and prolonged filter life

Existing evidence related to soil retention of phosphorus from on-site wastewater treatment systems in boreal and temperate climate zones: a systematic map

BackgroundIn Sweden there are nearly one million soil-based on-site wastewater treatment systems (OWTSs). OWTSs may contribute to eutrophication of surface waters, due to the discharge of phosphorus (P). Hence, in certain cases, a high P removal rate (up to 90%) of OWTSs is required by Swedish authorities. Since these requirements may have costly consequences to property owners, it is debated whether they are too strict. In this debate, it is often claimed that the soil retention of P occurring in the natural environments may be underestimated by authorities. Soil retention is the inhibition of the transport of P through the ground, due to different chemical, physical and biological processes occurring there. These processes make the P transport slower, which may reduce the unwanted impact on receiving water bodies. However, the efficiency of soil retention of P remains unclear. The objective of this systematic map was to collect, code, organise and elucidate the relevant evidence related to the topic, to be able to guide stakeholders through the evidence base, and to support future research synthesising, commissioning, and funding. The systematic map was carried out in response to needs declared by the Swedish Agency for Marine and Water Management but the conclusions should be valid for a wider range of countries across boreo-temperate regions.MethodsSearches were made for peer-reviewed and grey literature using bibliographic databases, search engines, specialist websites, and stakeholder contacts. The references were screened for relevance according to a predefined set of eligibility criteria. A detailed database of the relevant studies was compiled. Data and metadata that enable evaluation and discussion of the character and quality of the evidence base were extracted and coded. Special focus was placed on assessing if existing evidence could contribute to policy and practice decision making. Descriptive information about the evidence base was presented in tables and figures. An interactive evidence atlas and a choropleth were created, displaying the locations of all studies.Review findings234 articles out of 10,797 screened records fulfilled the eligibility criteria. These articles contain 256 studies, performed in the field or in the laboratory. Six different study types were identified, based on where the measurements were conducted. Most studies, including laboratory studies, lack replicates. Most field studies are observational case studies.ConclusionsIt is not possible to derive valid generic measures of the efficiency of soil retention of P occurring in the natural soil environment from available research. Neither does the evidence base allow for answering the question of the magnitude of the potential impact of OWTSs on the P concentration in recipients on a general basis, or under what conditions OWTSs generally have such an impact. A compilation of groundwater studies may provide examples of how far the P may reach in x years, but the number of groundwater studies is insufficient to draw any general conclusions, given the complexity and variability of the systems. Future research should strive for replicated study designs, more elaborate reporting, and the establishment of a reporting standard

A critical review on production, modification and utilization of biochar

There has been an increased interest in the production of sustainable biochar in the past years, as biochar shows versatile physicochemical properties and, can have a wide applicability in diverse fields. Comprehensive studies have been made to characterize biochar produced from various biomass materials, using different production technologies and under different process conditions. However, research is still lacking in correlating biochar properties needed for certain applications with (i) feedstock, (ii) biochar production processes and conditions and (iii) biochar upgrading and modification strategies. To produce biochar with desired properties, there is a great need to establish and clarify such correlations, which can guide the selection of feedstock, tuning and optimization of the production process and more efficient utilization of biochar. On the other hand, further elucidation of these correlations is also important for biochar-stakeholder and end-users for predicting physiochemical properties of biochar from certain feedstock and production conditions, assessing potential effects of biochar utilization and clearly address needs towards biochar critical properties. This review summarizes a wide range of literature on the impact of feedstocks and production processes and reactions conditions on the biochar properties and the most important biochar properties required for the different potential applications. Based on collected data, recommendations are provided for mapping out biochar production for different biochar applications. Knowledge gaps and perspectives for future research have also been identified regarding the characterization and production of biochar.acceptedVersio

The Use of Blast Furnace Slag for Removal of Phosphorus from Wastewater in Sweden—A Review

Research on Phosphorus (P) removal capacity by blast furnace slags (BFS) has been undertaken in Sweden for the last decade. Both laboratory experiments and field trials have been carried out. While laboratory investigations revealed that BFS has a high P-sorption capacity (95–100%), P removal in field trials was much lower, ranging from 40 to 53%. In addition, a number of problems have been observed in BFS field testing including clogging, sulfuric odor and environmental (regulatory) concerns about possible leaching of heavy metals from the slag. In spite of these problems, and questioning by the environmental regulatory authorities, research continues to provide evidence that BFS can be regarded as a suitable filter media, and attempts have also been undertaken in order to further improve the P-removal capacity of this adsorbing material

Heavy metal sorption by sludge-derived biochar with focus on Pb²⁺ sorption capacity at μg/L concentrations

Abstract Municipal wastewater management causes metal exposure to humans and the environment. Targeted metal removal is suggested to reduce metal loads during sludge reuse and release of effluent to receiving waters. Biochar is considered a low-cost sorbent with high sorption capacity for heavy metals. In this study, heavy metal sorption to sludge-derived biochar (SDBC) was investigated through batch experiments and modeling and compared to that of wood-derived biochar (WDBC) and activated carbon (AC). The aim was to investigate the sorption efficiency at metal concentrations comparable to those in municipal wastewater (&lt;1 mg/L), for which experimental data are lacking and isotherm models have not been verified in previous works. Pb²⁺ removal of up to 83% was demonstrated at concentrations comparable to those in municipal wastewater, at pH 2. SDBC showed superior Pb²⁺ sorption capacity (maximum ~2 mg/g at pH 2) compared to WDBC and AC (&lt;0 and (3.5 ± 0.4) × 10⁻³ mg/g, respectively); however, at the lowest concentration investigated (0.005 mg/L), SDBC released Pb²⁺. The potential risk of release of other heavy metals (i.e., Ni, Cd, Cu, and Zn) needs to be further examined. The sorption capacity of SDBC over a metal concentration span of 0.005–150 mg Pb²⁺/L could be predicted with the Redlich–Peterson model. It was shown that experimental data at concentrations comparable to those in municipal wastewater are necessary to accurately model and predict the sorption capacity of SDBC at these concentrations

What evidence exists related to soil retention of phosphorus from on-site wastewater treatment systems in boreal and temperate climate zones? : A systematic map protocol

Background Soil-based on-site wastewater treatment systems (OWSs) are suspected to contribute to eutrophication of surface waters, due to the discharge of phosphorus (P). However, along the flow path between the facilities and surface waters, different processes contribute to delay the transport of phosphorus through the ground. This may reduce the unwanted impact on receiving water bodies. However, the strength and significance of this so-called soil retention remains unclear. In Sweden, there are nearly one million OWSs. To protect surface waters, a high P removal rate (up to 90%) is often required by the local municipalities. However, since these requirements may have costly consequences to property owners, it is debated as to whether they are too strict. In this debate, it is often claimed that the retention of P occurring in natural environments may be underestimated by authorities. Accordingly, there is a need for a scrutiny of the available evidence related to soil retention of phosphorus from OWSs. This is the objective of the planned systematic map. Focus will be on boreal and temperate climate zones. Methods Searches will be made for peer-reviewed articles and grey literature using bibliographic databases, search engines, specialist websites and stakeholder contacts. The references will be screened for relevance according to a predefined set of eligibility criteria. At stage one, after testing and clarifying the eligibility criteria, the references will be single-screened based on title and abstract. At stage two, potentially relevant references will be screened in full-text independently by two reviewers. We will compile a detailed database of the relevant studies. Moreover, a narrative report will be produced, describing the research landscape in general terms. This will be carried out with a conceptual model, describing the processes involved in P retention in natural environments, as a foundation. It will be discussed where the respective studies/study types fit into the conceptual model, and also evaluated how each study/study type can be related to the overarching question of eutrophication. Moreover, we will describe identified knowledge gaps that warrant further primary research effort, as well as identified knowledge clusters that could be suitable for systematic reviews