Mechanical strength of ground WC-Co cemented carbides after coating deposition

Manufacturing of hardmetal tools often involves surface grinding, ion etching and final coating. Each stage throughout the manufacturing chain introduces surface integrity changes which may be critical for defining the final mechanical behavior of the coated tools. Within this context, an experimental test program has been developed to assess the influence of a coating (TiN) deposition on surface integrity and transverse rupture strength of a previously ground fine-grained WC-Co grade substrate. Four different substrate surface finish conditions (prior to ion etching and coating) were evaluated: as sintered (AS), ground (G), polished (P), and ground plus high temperature annealing (GTT). Surface integrity and fracture resistance characterization, complemented with a detailed fractographic analysis, were performed on both uncoated and coated samples. Results show that the surface integrity after grinding has been partly modified during the ion etching and film deposition processes, particularly in terms of a reduced compressive residual stress state at the substrate surface level. Consequently, the grinding induced strength enhancement in hardmetals is reduced for coated specimens. Main reason behind it is the change of nature, location and stress state acting on critical flaw: from processing defects existing at the subsurface (uncoated G specimens) to grinding-induced microcracks located close to the interface between coating and substrate, but within the subsurface of the latter (coated G specimens). This is not the case for AS and P conditions, where flexural strength does not change as a result of ion etching and coating. Finally, fracture resistance increases slightly for GTT specimens after coating process, possibly caused by a beneficial effect of the deposited film on the residual stress state at the surfac

Enhanced thermal stability and fracture toughness of TiAlN coatings by Cr, Nb and V-alloying

The effect of metal alloying on mechanical properties including hardness and fracture toughness were investigated in three alloys, Ti~0.33Al0.50(Me)~0.17N (Me¿=¿Cr, Nb and V), and compared to Ti0.50Al0.50N, in the as-deposited state and after annealing. All studied alloys display similar as-deposited hardness while the hardness evolution during annealing is found to be connected to phase transformations, related to the alloy's thermal stability. The most pronounced hardening was observed in Ti0.50Al0.50N, while all the coatings with additional metal elements sustain their hardness better and they are harder than Ti0.50Al0.50N after annealing at 1100¿°C. Fracture toughness properties were extracted from scratch tests. In all tested conditions, as-deposited and annealed at 900 and 1100¿°C, Ti0.33Al0.50Nb0.17N show the least surface and sub-surface damage when scratched despite the differences in decomposition behavior and h-AlN formation. Theoretically estimated ductility of phases existing in the coatings correlates well with their crack resistance. In summary, Ti0.33Al0.50Nb0.17N is the toughest alloy in both as-deposited and post-annealed states.Peer ReviewedPostprint (author's final draft

Contact damage resistance of TiN-coated hardmetals: Beneficial effects associated with substrate grinding

Contact loading is a common service condition for coated hardmetal tools and components. Substrate grinding represents a key step within the manufacturing chain of these coated systems. Within this context, the influence of surface integrity changes caused by abrasive grinding of the hardmetal substrate, prior to coating, is evaluated with respect to contact damage resistance. Three different substrate surface finish conditions are studied: ground (G), mirror-like polished (P) and ground plus heat-treated (GTT). Tests are conducted by means of spherical indentation under increasing monotonic load and the contact damage resistance is assessed. Substrate grinding enhances resistance against both crack nucleation at the coating surface and subsequent propagation into the hardmetal substrate. Hence, crack emergence and damage evolution is effectively delayed for the coated G condition, as compared to the reference P one. The observed system response is discussed on the basis of the beneficial effects associated with compressive residual stresses remnant at the subsurface level after grinding, ion-etching and coating. The influence of the stress state is further corroborated by the lower contact damage resistance exhibited by the coated GTT specimens. Finally, differences observed on the interaction between indentation-induced damage and failure mode under flexural testing points in the direction that substrate grinding also enhances damage tolerance of the coated system when exposed to contact loadsPeer ReviewedPostprint (author's final draft

Mechanical strength of ground WC-Co cemented carbides after coating deposition

Manufacturing of hardmetal tools often involves surface grinding, ion etching and final coating. Each stage throughout the manufacturing chain introduces surface integrity changes which may be critical for defining the final mechanical behavior of the coated tools. Within this context, an experimental test program has been developed to assess the influence of a coating (TiN) deposition on surface integrity and transverse rupture strength of a previously ground fine-grained WC-Co grade substrate. Four different substrate surface finish conditions (prior to ion etching and coating) were evaluated: as sintered (AS), ground (G), polished (P), and ground plus high temperature annealing (GTT). Surface integrity and fracture resistance characterization, complemented with a detailed fractographic analysis, were performed on both uncoated and coated samples. Results show that the surface integrity after grinding has been partly modified during the ion etching and film deposition processes, particularly in terms of a reduced compressive residual stress state at the substrate surface level. Consequently, the grinding induced strength enhancement in hardmetals is reduced for coated specimens. Main reason behind it is the change of nature, location and stress state acting on critical flaw: from processing defects existing at the subsurface (uncoated G specimens) to grinding-induced microcracks located close to the interface between coating and substrate, but within the subsurface of the latter (coated G specimens). This is not the case for AS and P conditions, where flexural strength does not change as a result of ion etching and coating. Finally, fracture resistance increases slightly for GTT specimens after coating process, possibly caused by a beneficial effect of the deposited film on the residual stress state at the surfac

Substrate surface finish effects on scratch resistance and failure mechanisms of TiN-coated hardmetals

In this study, the influence of substrate surface finish on scratch resistance and associated failure mechanisms is investigated in the case of a TiN-coated hardmetal. Three different surface finish conditions are studied: as-sintered (AS), ground (G), and mirror-like polished (P). For G conditioned samples, scratch tests are conducted both parallel and perpendicular to the direction of the grinding grooves. It is found that coated AS, G and P samples exhibit similar critical load for initial substrate exposure and the same brittle adhesive failure mode. However, the damage scenarios are different, i.e. the substrate exposure is discrete and localized to the scratch tracks for G samples while a more pronounced and continuous exposure is seen for AS and P ones. Aiming to understand the role played by the grinding-induced compressive residual stresses, the study is extended to coated systems where ground substrates are thermal annealed (for relieving stresses) before being ion etched and coated. It yielded lower critical loads and changes in the mechanisms for the scratch-related failure; the latter depending on the relative orientation between scratching and grinding directions.Peer Reviewe

The impact of European Communities' policy on quality management in construction

SIGLEAvailable from British Library Document Supply Centre- DSC:8377.36(CIRIA-SP--89) / BLDSC - British Library Document Supply CentreGBUnited Kingdo

Contact damage resistance of TiN-coated hardmetals: Beneficial effects associated with substrate grinding

Contact loading is a common service condition for coated hardmetal tools and components. Substrate grinding represents a key step within the manufacturing chain of these coated systems. Within this context, the influence of surface integrity changes caused by abrasive grinding of the hardmetal substrate, prior to coating, is evaluated with respect to contact damage resistance. Three different substrate surface finish conditions are studied: ground (G), mirror-like polished (P) and ground plus heat-treated (GTT). Tests are conducted by means of spherical indentation under increasing monotonic load and the contact damage resistance is assessed. Substrate grinding enhances resistance against both crack nucleation at the coating surface and subsequent propagation into the hardmetal substrate. Hence, crack emergence and damage evolution is effectively delayed for the coated G condition, as compared to the reference P one. The observed system response is discussed on the basis of the beneficial effects associated with compressive residual stresses remnant at the subsurface level after grinding, ion-etching and coating. The influence of the stress state is further corroborated by the lower contact damage resistance exhibited by the coated GTT specimens. Finally, differences observed on the interaction between indentation-induced damage and failure mode under flexural testing points in the direction that substrate grinding also enhances damage tolerance of the coated system when exposed to contact loadsPeer Reviewe

A methodology for operational reliability programme development and assessment with application to ship propulsion plant

SIGLEAvailable from British Library Document Supply Centre-DSC:DXN036018 / BLDSC - British Library Document Supply CentreGBUnited Kingdo

Substrate surface finish effects on scratch resistance and failure mechanisms of TiN-coated hardmetals

In this study, the influence of substrate surface finish on scratch resistance and associated failure mechanisms is investigated in the case of a TiN-coated hardmetal. Three different surface finish conditions are studied: as-sintered (AS), ground (G), and mirror-like polished (P). For G conditioned samples, scratch tests are conducted both parallel and perpendicular to the direction of the grinding grooves. It is found that coated AS, G and P samples exhibit similar critical load for initial substrate exposure and the same brittle adhesive failure mode. However, the damage scenarios are different, i.e. the substrate exposure is discrete and localized to the scratch tracks for G samples while a more pronounced and continuous exposure is seen for AS and P ones. Aiming to understand the role played by the grinding-induced compressive residual stresses, the study is extended to coated systems where ground substrates are thermal annealed (for relieving stresses) before being ion etched and coated. It yielded lower critical loads and changes in the mechanisms for the scratch-related failure; the latter depending on the relative orientation between scratching and grinding directions.Peer Reviewe

Structure, deformation and fracture of arc evaporated Zr-Si-N hard films

Zr-Si-N films with varying Si contents were grown on WC-Co substrates by reactive cathodic arc deposition technique. The resulting microstructures of the films correlate to dominant variation in mechanical properties and deformation mechanisms. Si forms a substitutional solid solution in the cubic ZrN lattice up to 1.8 at.% exhibiting a fine columnar microstructure. Further Si additions result in precipitation of an amorphous (a)-SiNx phase and evolution of a nanocomposite microstructure (nc ZrN/a-SiNx) which completely suppresses the columnar microstructure at 63 at.% Si. The rotation-induced artificial layering during film growth is used as a marker to visualize the deformation of the film. A dislocation-based homogeneous plastic deformation mechanism dominates the columnar microstructure, while grain boundary sliding is the active mechanism mediating heterogeneous plastic deformation in the nanocomposite microstructure. Film hardness increases with increasing Si content in the columnar microstructure due to an effective solid solution strengthening. The deformation mechanism of localized grain boundary sliding in the nanocomposite microstructure results in a lower hardness. When cracking is induced by indentation, the fine columnar microstructure exhibits pronounced crack deflection that results in a higher fracture resistance compared to the nanocomposite films. (C) 2014 Elsevier B.V. All rights reserved.Peer Reviewe