Alternative conservation outcomes from aquatic fauna translocations: Losing and saving the Running River rainbowfish

1. The translocation of species outside their natural range is a threat to aquatic biodiversity globally, especially freshwater fishes, as most are not only susceptible to predation and competition but readily hybridize with congeners. 2. Running River rainbowfish (RRR, Melanotaenia sp.) is a narrow-ranged, small-bodied freshwater fish that recently became threatened and was subsequently listed as Critically Endangered, owing to introgressive hybridization and competition following the translocation of a congeneric species, the eastern rainbowfish (Melanotaenia splendida). 3. To conserve RRR, wild fish were taken into captivity, genetically confirmed as pure representatives, and successfully bred. As the threat of introgression with translocated eastern rainbowfish could not be mitigated, a plan was devised to translocate captive raised RRR into unoccupied habitats within their native catchment, upstream of natural barriers. The translocation plan involved careful site selection and habitat assessment, predator training (exposure to predators prior to release), soft release (with a gradual transition from captivity to nature), and post-release monitoring, and this approach was ultimately successful. 4. Two populations of RRR were established in two previously unoccupied streams above waterfalls with a combined stream length of 18 km. Post-release monitoring was affected by floods and low sample sizes, but suggested that predation and time of release are important factors to consider in similar conservation recovery programmes for small-bodied, short-lived fishes

THE AMBIGUITY IN FOREST PROFILES AND XTINCTION ESTIMATED FROM MULTIBASELINE INTERFEROMETRIC SAR

This paper demonstrates by simulation that in the estimation of vegetation profiles from multibaseline interferometric synthetic aperture radar (InSAR), the peak extinction coefficient is poorly determined for typical interferometric coherence and phase accuracies. This coefficient determines overall density and affects the relative density profiles estimated from interferometry. This paper shows that a given radar power profile gives rise to a family of vegetation density profiles, depending on the peak extinction assumed. It is further  demonstrated that estimating the peak extinction requires coherence accuracies of better than 0.1% and phase accuracies of better than a few tenths of a degree, both of which exceed the performance of typical or envisioned SAR systems. Two recommended approaches to profile production with InSAR are 1) use the radar power profile instead of the vegetation density profile for biomass estimation and other ecosystem characterization (in analogy to LIDAR power which is most frequently used for lidar studies of biomass) or 2) apply external information to establish the extinction characteristics needed for vegetation density profiles.Esse artigo procura demonstrar, por simulação, que na estimativa de perfis de volume da vegetação por interferometria  com múltiplas linhas de base, o pico de extinção não é adequadamente determinado pela coerência interferométrica e fase, com acurácias típicas de InSAR. Esse pico determina a densidade global, afetando os perfis de densidade relativa da vegetação estimados por interferometria. Esse trabalho mostra que para um dado perfil de potência-radar há uma série de perfis de densidade da vegetação, dependendo do pico de extinção assumido. É ainda demonstrado que a estimativa do pico de  extinção requer exatidões de coerência melhores que 0,1%, bem como, de acurácias de fases que alguns décimos de graus, valores esses que atualmente excedem o desempenho de sistemas SAR em operação ou aqueles previstos. As duas abordagens recomendadas para a produção de perfis com InSAR são: (1) utilizar o perfil-radar, ao invés do perfil de densidade de vegetação, para estimação de biomassa e outras caracterizações de ecossistema (em nalogia à potência-lidar, a qual é mais  frequentemente utilizada nos estudos de biomassa baseados em LIDAR); ou (2) aplicar informação externa para estabelecer as características de extinção necessárias aos perfis de densidade de vegetação

Error-analysis and comparison to analytical models of numerical waveforms produced by the NRAR Collaboration

The Numerical-Relativity-Analytical-Relativity (NRAR) collaboration is a joint effort between members of the numerical relativity, analytical relativity and gravitational-wave data analysis communities. The goal of the NRAR collaboration is to produce numerical-relativity simulations of compact binaries and use them to develop accurate analytical templates for the LIGO/Virgo Collaboration to use in detecting gravitational-wave signals and extracting astrophysical information from them. We describe the results of the first stage of the NRAR project, which focused on producing an initial set of numerical waveforms from binary black holes with moderate mass ratios and spins, as well as one non-spinning binary configuration which has a mass ratio of 10. All of the numerical waveforms are analysed in a uniform and consistent manner, with numerical errors evaluated using an analysis code created by members of the NRAR collaboration. We compare previously-calibrated, non-precessing analytical waveforms, notably the effective-one-body (EOB) and phenomenological template families, to the newly-produced numerical waveforms. We find that when the binary's total mass is ~100-200 solar masses, current EOB and phenomenological models of spinning, non-precessing binary waveforms have overlaps above 99% (for advanced LIGO) with all of the non-precessing-binary numerical waveforms with mass ratios <= 4, when maximizing over binary parameters. This implies that the loss of event rate due to modelling error is below 3%. Moreover, the non-spinning EOB waveforms previously calibrated to five non-spinning waveforms with mass ratio smaller than 6 have overlaps above 99.7% with the numerical waveform with a mass ratio of 10, without even maximizing on the binary parameters.Comment: 51 pages, 10 figures; published versio

Estimating 3-Dimensional Structure of Tropical Forests from Radar Interferometry / Estimativa da Estrutura 3-Dimensional das Florestas Tropicais Através de Interferometria de Radar

This paper describes the retrieval of 3-dimensional vegetation density profiles from interferometric synthetic aperture radar (InSAR) using physical models. InSAR’s sensitivity to vertical structure is generally regarded as less direct and more difficult to understand than that of lidar. But InSAR’s coverage is superior to that of lidar, suggesting InSAR is more promising as an important component of a global 3-dimensional forest monitoring technique. The goal of this paper is to introduce, simplify and demystify the use of simple physical models to understand InSAR. A general equation expressing the InSAR observation in terms of density is described heuristically, along with the approximations in its development. The information content of the equation leads to the estimation of density parameters. Preliminary results are shown from a multibaseline C-band (wavelength=0.056 m) vertical-polarization interferometer, realized with AirSAR flown at multiple altitudes over primary, secondary, and selectively logged tropical forests, as well as abandoned pastures at La Selva Biological Station in Costa Rica

Estimating 3-Dimensional Structure of Tropical Forests from Radar InterferometryEstimativa da Estrutura 3-Dimensional das Florestas Tropicais Através de Interferometria de Radar

This paper describes the retrieval of 3-dimensional vegetation density profiles from interferometric synthetic aperture radar (InSAR) using physical models. InSAR’s sensitivity to vertical structure is generally regarded as less direct and more difficult to understand than that of lidar. But InSAR’s coverage is superior to that of lidar, suggesting InSAR is more promising as an important component of a global 3-dimensional forest monitoring technique. The goal of this paper is to introduce, simplify and demystify the use of simple physical models to understand InSAR. A general equation expressing the InSAR observation in terms of density is described heuristically, along with the approximations in its development. The information content of the equation leads to the estimation of density parameters. Preliminary results are shown from a multibaseline C-band (wavelength=0.056 m) vertical-polarization interferometer, realized with AirSAR flown at multiple altitudes over primary, secondary, and selectively logged tropical forests, as well as abandoned pastures at La Selva Biological Station in Costa Rica.Resumo Este trabalho descreve o procedimento de recuperação do perfil tridimensional da densidade de vegetação, a partir de dados interferométricos de radar de abertura sintética (InSAR), utilizando modelos físicos. A sensibilidade da técnica InSAR para detectar estruturas verticais de vegetação é geralmente considerada menos direta e mais difícil de entender se comparado com dados de LIDAR (técnica utilizando laser). A utilização da técnica InSAR permite uma cobertura superior ao LIDAR e é potencialmente mais promissora como técnica de monitoramento global para a detecção da estrutura tri-dimensional de florestas. O objetivo deste trabalho é o de simplificar e desmistificar o uso de modelos físicos simples no entendimento da técnica InSAR. A equação geral que expressa a observação InSAR em termos de densidade é escrita heuristicamente, bem como as aproximações feitas no seu desenvolvimento. O conteúdo de informação da equação nos possibilita a estimação dos parâmetros de densidade da vegetação

\textsc{MaGe} - a {\sc Geant4}-based Monte Carlo Application Framework for Low-background Germanium Experiments

We describe a physics simulation software framework, MAGE, that is based on the GEANT4 simulation toolkit. MAGE is used to simulate the response of ultra-low radioactive background radiation detectors to ionizing radiation, specifically the MAJORANA and GERDA neutrinoless double-beta decay experiments. MAJORANA and GERDA use high-purity germanium detectors to search for the neutrinoless double-beta decay of 76Ge, and MAGE is jointly developed between these two collaborations. The MAGE framework contains the geometry models of common objects, prototypes, test stands, and the actual experiments. It also implements customized event generators, GEANT4 physics lists, and output formats. All of these features are available as class libraries that are typically compiled into a single executable. The user selects the particular experimental setup implementation at run-time via macros. The combination of all these common classes into one framework reduces duplication of efforts, eases comparison between simulated data and experiment, and simplifies the addition of new detectors to be simulated. This paper focuses on the software framework, custom event generators, and physics lists.Comment: 12 pages, 6 figure

Safety and Efficacy of Axicabtagene Ciloleucel versus Standard of Care in Patients 65 Years of Age or Older with Relapsed/Refractory Large B-Cell Lymphoma

Purpose: Older patients with relapsed/refractory (R/R) large B-cell lymphoma (LBCL) may be considered ineligible for curative-intent therapy including high-dose chemotherapy with autologous stem-cell transplantation (HDT-ASCT). Here, we report outcomes of a preplanned subgroup analysis of patients >= 65 years in ZUMA-7. Patients and Methods: Patients with LBCL refractory to or relapsed = 65 years were random-ized to axi-cel and SOC, respectively. Median EFS was greater with axi-cel versus SOC (21.5 vs. 2.5 months; median follow-up: 24.3 months; HR, 0.276; descriptive P = 3 adverse events occurred in 94% of axi-cel and 82% of SOC patients. No grade 5 cytokine release syndrome or neurologic events occurred. In the quality-of-life analysis, the mean change in PRO scores from baseline at days 100 and 150 favored axi-cel for EORTC QLQ-C30 Global Health, Physical Functioning, and EQ-5D-5L visual analog scale (descriptive P = 65 and = 65 years with R/R LBCL

Invasion of Wolbachia into Anopheles and Other Insect Germlines in an Ex vivo Organ Culture System

The common bacterial endosymbiont Wolbachia manipulates its host's reproduction to promote its own maternal transmission, and can interfere with pathogen development in many insects making it an attractive agent for the control of arthropod-borne disease. However, many important species, including Anopheles mosquitoes, are uninfected. Wolbachia can be artificially transferred between insects in the laboratory but this can be a laborious and sometimes fruitless process. We used a simple ex vivo culturing technique to assess the suitability of Wolbachia-host germline associations. Wolbachia infects the dissected germline tissue of multiple insect species when the host tissue and bacteria are cultured together. Ovary and testis infection occurs in a density-dependent manner. Wolbachia strains are more capable of invading the germline of their native or closely related rather than divergent hosts. The ability of Wolbachia to associate with the germline of novel hosts is crucial for the development of stably-transinfected insect lines. Rapid assessment of the suitability of a strain-host combination prior to transinfection may dictate use of a particular Wolbachia strain. Furthermore, the cultured germline tissues of two major Anopheline vectors of Plasmodium parasites are susceptible to Wolbachia infection. This finding further enhances the prospect of using Wolbachia for the biological control of malaria