Advanced electromagnetic methods for aerospace vehicles

The Advanced Helicopter Electromagnetics is centered on issues that advance technology related to helicopter electromagnetics. Progress was made on three major topics: composite materials; precipitation static corona discharge; and antenna technology. In composite materials, the research has focused on the measurements of their electrical properties, and the modeling of material discontinuities and their effect on the radiation pattern of antennas mounted on or near material surfaces. The electrical properties were used to model antenna performance when mounted on composite materials. Since helicopter platforms include several antenna systems at VHF and UHF bands, measuring techniques are being explored that can be used to measure the properties at these bands. The effort on corona discharge and precipitation static was directed toward the development of a new two dimensional Voltage Finite Difference Time Domain computer program. Results indicate the feasibility of using potentials for simulating electromagnetic problems in the cases where potentials become primary sources. In antenna technology the focus was on Polarization Diverse Conformal Microstrip Antennas, Cavity Backed Slot Antennas, and Varactor Tuned Circular Patch Antennas. Numerical codes were developed for the analysis of two probe fed rectangular and circular microstrip patch antennas fed by resistive and reactive power divider networks

Advanced electromagnetic methods for aerospace vehicles

The Advanced Helicopter Electromagnetics (AHE) Industrial Associates Program continues its research on variety of main topics identified and recommended by the Advisory Task Force of the program. The research activities center on issues that advance technology related to helicopter electromagnetics. While most of the topics are a continuation of previous works, special effort has been focused on some of the areas due to recommendations from the last annual conference. The main topics addressed in this report are: composite materials, and antenna technology. The area of composite materials continues getting special attention in this period. The research has focused on: (1) measurements of the electrical properties of low-conductivity materials; (2) modeling of material discontinuity and their effects on the scattering patterns; (3) preliminary analysis on interaction of electromagnetic fields with multi-layered graphite fiberglass plates; and (4) finite difference time domain (FDTD) modeling of fields penetration through composite panels of a helicopter

Advanced electromagnetic methods for aerospace vehicles

The Advanced Helicopter Electromagnetics (AHE) Industrial Associates Program has fruitfully completed its fourth year. Under the support of the AHE members and the joint effort of the research team, new and significant progress has been achieved in the year. Following the recommendations by the Advisory Task Force, the research effort is placed on more practical helicopter electromagnetic problems, such as HF antennas, composite materials, and antenna efficiencies. In this annual report, the main topics to be addressed include composite materials and antenna technology. The research work on each topic has been driven by the AHE consortium members' interests and needs. The remarkable achievements and progresses in each subject is reported respectively in individual sections of the report. The work in the area of composite materials includes: modeling of low conductivity composite materials by using Green's function approach; guidelines for composite material modeling by using the Green's function approach in the NEC code; development of 3-D volume mesh generator for modeling thick and volumetric dielectrics by using FD-TD method; modeling antenna elements mounted on a composite Comanche tail stabilizer; and antenna pattern control and efficiency estimate for a horn antenna loaded with composite dielectric materials

Use of electromyography to detect muscle exhaustion in finishing barrows fed ractopamine HCl

Citation: Noel, J. A., Broxterman, R. M., McCoy, G. M., Craig, J. C., Phelps, K. J., Burnett, D. D., . . . Gonzalez, J. M. (2016). Use of electromyography to detect muscle exhaustion in finishing barrows fed ractopamine HCl. Journal of Animal Science, 94(6), 2344-2356. doi:10.2527/jas2016-0398The objectives of this study were to determine the effects of dietary ractopamine HCl (RAC) on muscle fiber characteristics and electromyography (EMG) measures of finishing barrow exhaustion when barrows were subjected to increased levels of activity. Barrows (n = 34; 92 +/- 2 kg initial BW) were assigned to 1 of 2 treatments: a conventional swine finishing diet containing 0 mg/kg ractopamine HCl (CON) or a diet formulated to meet the requirements of finishing barrows fed 10 mg/kg RAC (RAC+). After 32 d on feed, barrows were individually moved around a track at 0.79 m/s until subjectively exhausted. Wireless EMG sensors were affixed to the deltoideus (DT), triceps brachii lateral head (TLH), tensor fasciae latae (TFL), and semitendinosus (ST) muscles to measure median power frequency (MdPF) and root mean square (RMS) as indicators of action potential conduction velocity and muscle fiber recruitment, respectively. After harvest, samples of each muscle were collected for fiber type, succinate dehydrogenase (SDH), and capillary density analysis. Speed was not different (P = 0.82) between treatments, but RAC+ barrows reached subjective exhaustion earlier and covered less distance than CON barrows (P 0.29). There was a treatment x muscle interaction (P = 0.04) for end-point RMS values. The RAC diet did not change end-point RMS values in the DT or TLH (P > 0.37); however, the diet tended to decrease and increase end-point RMS in the ST and TFL, respectively (P 0.10). Muscles of RAC+ barrows tended to have less type I fibers and more capillaries per fiber (P < 0.07). Type I and IIA fibers of RAC+ barrows were larger (P < 0.07). Compared with all other muscles, the ST had more (P < 0.01) type IIB fibers and larger type I, IIA, and IIX fibers (P < 0.01). Type I, IIA, and IIX fibers of the ST also contained less SDH compared with the other muscles (P < 0.01). Barrows fed a RAC diet had increased time to subjective exhaustion due to loss of active muscle fibers in the ST, possibly due to fibers being larger and less oxidative in metabolism. Size increases in type I and IIA fibers with no change in oxidative capacity could also contribute to early exhaustion of RAC+ barrows. Overall, EMG technology can measure real-time muscle fiber loss to help explain subjective exhaustion in barrows

Magnetic resonance imaging for lung cancer detection: Experience in a population of more than 10,000 healthy individuals

<p>Abstract</p> <p>Background</p> <p>Recent refinements of lung MRI techniques have reduced the examination time and improved diagnostic sensitivity and specificity. We conducted a study to assess the feasibility of MRI for the detection of primary lung cancer in asymptomatic individuals.</p> <p>Methods</p> <p>A retrospective chart review was performed on images of lung parenchyma, which were extracted from whole-body MRI examinations between October 2000 and December 2007. 11,766 consecutive healthy individuals (mean age, 50.4 years; 56.8% male) were scanned using one of two 1.5-T scanners (Sonata and Sonata Maestro, Siemens Medical Solutions, Erlangen, Germany). The standard protocol included a quick whole-lung survey with T2-weighted 2-dimensional half Fourier acquisition single shot turbo spin echo (HASTE) and 3-dimensional volumetric interpolated breath-hold examination (VIBE). Total examination time was less than 10 minutes, and scanning time was only 5 minutes. Prompt referrals and follow-ups were arranged in cases of suspicious lung nodules.</p> <p>Results</p> <p>A total of 559 individuals (4.8%) had suspicious lung nodules. A total of 49 primary lung cancers were diagnosed in 46 individuals: 41 prevalence cancers and 8 incidence cancers. The overall detection rate of primary lung cancers was 0.4%. For smokers aged 51 to 70 years, the detection rate was 1.4%. TNM stage I disease accounted for 37 (75.5%). The mean size of detected lung cancers was 1.98 cm (median, 1.5 cm; range, 0.5-8.2 cm). The most histological types were adenocarcinoma in 38 (77.6%).</p> <p>Conclusion</p> <p>Rapid zero-dose MRI can be used for lung cancer detection in a healthy population.</p

A Lentivirus-Mediated Genetic Screen Identifies Dihydrofolate Reductase (DHFR) as a Modulator of β-Catenin/GSK3 Signaling

The multi-protein β-catenin destruction complex tightly regulates β-catenin protein levels by shuttling β-catenin to the proteasome. Glycogen synthase kinase 3β (GSK3β), a key serine/threonine kinase in the destruction complex, is responsible for several phosphorylation events that mark β-catenin for ubiquitination and subsequent degradation. Because modulation of both β-catenin and GSK3β activity may have important implications for treating disease, a complete understanding of the mechanisms that regulate the β-catenin/GSK3β interaction is warranted. We screened an arrayed lentivirus library expressing small hairpin RNAs (shRNAs) targeting 5,201 human druggable genes for silencing events that activate a β-catenin pathway reporter (BAR) in synergy with 6-bromoindirubin-3′oxime (BIO), a specific inhibitor of GSK3β. Top screen hits included shRNAs targeting dihydrofolate reductase (DHFR), the target of the anti-inflammatory compound methotrexate. Exposure of cells to BIO plus methotrexate resulted in potent synergistic activation of BAR activity, reduction of β-catenin phosphorylation at GSK3-specific sites, and accumulation of nuclear β-catenin. Furthermore, the observed synergy correlated with inhibitory phosphorylation of GSK3β and was neutralized upon inhibition of phosphatidyl inositol 3-kinase (PI3K). Linking these observations to inflammation, we also observed synergistic inhibition of lipopolysaccharide (LPS)-induced production of pro-inflammatory cytokines (TNFα, IL-6, and IL-12), and increased production of the anti-inflammatory cytokine IL-10 in peripheral blood mononuclear cells exposed to GSK3 inhibitors and methotrexate. Our data establish DHFR as a novel modulator of β-catenin and GSK3 signaling and raise several implications for clinical use of combined methotrexate and GSK3 inhibitors as treatment for inflammatory disease

The trophic importance of epiphytic algae in a freshwater macrophyte system (Potamogeton perfoliatus L.): stable isotope and fatty acid analyses

Stable isotope and fatty acid analyses were used to study carbon sources for animals in a submerged plant bed. Epiphytes growing on Potamogeton perfoliatus, sand microflora, and alder leaves were the most important carbon sources. The most abundant macrophyte, P. perfoliatus was unimportant as a food source. Modelling (IsoSource) showed that epiphytes were the most important food source for the most abundant benthic invertebrates, the isopod Asellus aquaticus (annual mean contribution 64%), the amphipod Gammarus pulex (66%), and the gastropod Potamopyrgus antipodarum (83%). The mean annual contributions of sand microflora were, respectively, 21, 19, and 9%; and of alder leaves, 15, 15, and 8% for these three species. The relative importance of carbon sources varied seasonally. The relative contribution of epiphytes was lowest for all three grazer species in July: A. aquaticus 38%, G. pulex 43%, and P. antipodarum 42%. A decline in epiphyte biomass in summer may have caused this switch to less attractive food sources. P. perfoliatus provided habitat and shelter for consumers, but food was mainly supplied indirectly by providing space for attached epiphytes, which are fast-growing and provide a highly nutritious food source

Analysis of probe-fed circular microstrip antennas

The Green\u27s function/moment method approach is used to solve a number of problems involving circular microstrip patch antennas. These problems include radiation and scattering from isolated circular patches, mutual coupling between circular patches and input impedance of circular patches in the infinite array environment. In all cases, the patches are probe-fed via the center conductor of a coaxial transmission line. Initially, the probe feed is modeled as a short electric line current which excites current on the patch. This idealized probe feed model approach ignores the probe self-impedance as well as the rapidly-varying patch current in the vicinity of the feed connection point. Later, a rigorous probe feed model which overcomes these deficiencies is developed and used in the analysis of both isolated circular patches and circular patches in infinite arrays. An additional topic investigated is the effect of suspending a dielectric layer above the substrate. Extensive measurements are done to confirm the numerical solutions developed. For the infinite array cases, verification is achieved using waveguide simulator experiments. In general, the measurements indicate that the idealized probe feed model is adequate for antennas and arrays printed on substrates that are electrically thin and for predicting general performance trends. However, the rigorous probe feed model is more accurate and is useful over a wider range of practical substrate dielectric constants and thicknesses

Antennas with non-foster matching networks

Most antenna engineers are likely to believe that antennas are one technology that is more or less impervious to the rapidly advancing semiconductor industry. However, as demonstrated in this lecture, there is a way to incorporate active components into an antenna and transform it into a new kind of radiating structure that can take advantage of the latest advances in analog circuit design. The approach for making this transformation is to make use of non-Foster circuit elements in the matching network of the antenna. By doing so, we are no longer constrained by the laws of physics that appl