Universal and Excavatable Controlled Low Strength Material Using High Loss on Ignition Fly Ash and Limestone Screenings†

Limestone screenings and high loss on ignition (LOI) fly ash are by-products that are stockpiling because of their unintentional production and the negative effects when utilized in portland cement concretes. The research objective was to investigate whether these by-products could produce controlled low strength materials (CLSMs) meeting the three types of Tennessee Department of Transportation (TDOT) 204.06 flowable fill specifications. TDOT defines these CLSMs as the following: general use, excavatable, and early strength. Each type is required to have an inverted slump flow of not less than 15 inches (38.1 cm) while meeting ASTM International D6024 at 24 hours. Because of trench unavailability, a 10-psi minimum compressive strength requirement was substituted for the ASTM D6024 ball drop. Early strength flowable fills must meet ASTM D6024 at 6 hours and provide a 30-psi minimum compressive strength at 24 hours. Excavatable flowable fills (EFFs) must also provide a 30-psi minimum at 28 days and a 140-psi maximum at 98 days. A universal flowable fill was produced without portland cement (PC), but by using an 11.1% LOI fly ash, class C fly ash, and limestone screenings. The EFF was produced using 92% high LOI fly ash and 7% PC by weight of the cementing materials. The results indicated that high LOI fly ash and limestone screenings can be combined to produce an excavatable CLSM satisfying TDOT CLSM requirements, and an universal CLSM can be produced that satisfies the requirements for general use, excavatable, and early strength TDOT CLSMs

Effects of feeding low levels of crude glycerin with or without other by-products on performance and carcass characteristics of feedlot heifers

Expansion of the renewable fuels industries has increased availability of by-products that are well suited for use as cattle feed. Glycerin is among the principal by-products of biodiesel production, comprising approximately 10% (by weight) of the soybean oil that is used to manufacture soy-based diesel fuel. Our previous research evaluated effects of including between 0% and 16% glycerin in flaked-corn finishing diets and revealed that optimal growth performance was achieved with 2% glycerin addition. Our laboratory experiments have suggested that even lower levels of glycerin may be effective at stimulating digestion. Therefore, the objective of this study was to evaluate effects of low levels of glycerin in the diet on performance and carcass characteristics of finishing cattle. Furthermore, because distillers grains and other by-products are increasingly common in feedlot rations, we opted to evaluate glycerin in corn-based finishing diets as well as in diets that consisted of a combination of corn grain, distillers grains, and soybean hulls

Initial heifer body composition has little impact on response to Zilmax

Using a growth promotant at the correct time of finishing is critical for maximizing profit potential. Previous studies have shown that zilpaterol-HCl (Zilmax; Intervet/ Schering-Plough Animal Health, Millsboro, DE) improves carcass characteristics. The objective of this study was to determine effects of prior body composition on subsequent changes in carcass weight, fatness, and muscle in heifers fed Zilmax so producers can introduce Zilmax at the level of finish that will result in the most desirable response. We hypothesized that fatter heifers use fat as the fuel for muscle growth

School-based targeted prevention compared to specialist mental health treatment for youth anxiety

Background The ‘FRIENDS for life’ program (FRIENDS) is a 10-session cognitive behavioral therapy (CBT) program used for prevention and treatment of youth anxiety. There is discussion about whether FRIENDS is best applied as prevention or as treatment. Methods We compared FRIENDS delivered in schools as targeted prevention to a previous specialist mental health clinic trial. The targeted prevention sample (N = 82; Mage = 11.6 years, SD = 2.1; 75.0% girls) was identified and recruited by school nurses in collaboration with a community psychologist. The clinical sample (N = 88, Mage = 11.7 years, SD = 2.1; 54.5% girls) was recruited for a randomized controlled trial from community child- and adolescent psychiatric outpatient clinics and was diagnosed with anxiety disorders. Results Both samples showed significantly reduced anxiety symptoms from baseline to postintervention, with medium mean effect sizes across raters (youths and parents) and timepoints (post; 12-months follow-up). Baseline youth-reported anxiety symptom levels were similar between the samples, whereas parent-reported youth anxiety was higher in the clinical sample. Conclusions The study suggests that self-reported anxiety levels may not differ between youth recruited in schools and in clinic settings. The results indicate promising results of the FRIENDS program when delivered in schools by less specialized health personnel from the school health services, as well as when delivered in clinics by trained mental health professionals.publishedVersio

Setting the agenda: Climate change adaptation and mitigation for food systems in the developing world

New agricultural development pathways are required to meet climate change adaptation and mitigation needs in the food systems of low-income countries. A research and policy agenda is provided to indicate where innovation and new knowledge are needed. Adaptation requires identifying suitable crop varieties and livestock breeds, as well as building resilient farming and natural resources systems, institutions for famine and crop failure relief, and mechanisms for rapid learning by farmers. Mitigation requires transitioning to ‘low climate impact’ agriculture that reduces emissions while achieving food security, economic well-being and sustainability. Efficient interventions, incentives for large-scale shifts in practices, and monitoring systems are required. Integrated assessments of adaptation and mitigation are needed to better understand the synergies and trade-offs among outcomes

Study protocol: Australasian Registry of Severe Cutaneous Adverse Reactions (AUS-SCAR)

Introduction Severe cutaneous adverse reactions (SCAR) are a group of T cell-mediated hypersensitivities associated with significant morbidity, mortality and hospital costs. Clinical phenotypes include Stevens-Johnson syndrome (SJS), toxic epidermal necrolysis (TEN), drug reaction with eosinophilia and systemic symptoms (DRESS) and acute generalised exanthematous pustulosis (AGEP). In this Australasian, multicentre, prospective registry, we plan to examine the clinical presentation, drug causality, genomic predictors, potential diagnostic approaches, treatments and long-term outcomes of SCAR in Australia and New Zealand. Methods and analysis Adult and adolescent patients with SCAR including SJS, TEN, DRESS, AGEP and another T cell-mediated hypersensitivity, generalised bullous fixed drug eruption, will be prospectively recruited. A waiver of consent has been granted for some sites to retrospectively include cases which result in early mortality. DNA will be collected for all prospective cases. Blood, blister fluid and skin biopsy sampling is optional and subject to patient consent and site capacity. To develop culprit drug identification and prevention, genomic testing will be performed to confirm human leukocyte antigen (HLA) type and ex vivo testing will be performed via interferon-γ release enzyme linked immunospot assay using collected peripheral blood mononuclear cells. The long-term outcomes of SCAR will be investigated with a 12-month quality of life survey and examination of prescribing and mortality data. Ethics and dissemination This study was reviewed and approved by the Austin Health Human Research Ethics Committee (HREC/50791/Austin-19). Results will be published in peer-reviewed journals and presented at relevant conferences

Approach for Predicting Production Scenarios Focused on Cross Impact Analysis

AbstractOne of the most consistent challenges in business is anticipating what the future holds and what impact it may have on current production systems. The scenario technique is a well-established method for developing and forecasting multiple future development paths for companies. However, this method is mostly employed to develop and to support strategic long-term decisions. The core idea of the approach introduced in this paper is to convey the future impact of today's decisions on production systems to employees involved in production planning processes. With the help of immersive visualization, performed in virtual reality (VR) systems, planning participants can perceive how the factory must adapt to fit future demands.In this paper, the focus is on the fourth phase of the scenario technique – so called scenario development – and, in particular, the cross impact analysis. With this methodology, the interrelations, or cross impacts of the different basic elements are determined. The cross impact analysis results serve as a basis for the development of a standardized tool that can be used to create probable production scenarios out of given production systems. This standardized tool will facilitate the usage of the scenario technique for factory planning projects, as it focuses the immense diversity of future uncertainties companies are faced with on the factory level