Application of processed organic municipal solid waste on agricultural land - a scenario analysis

Source separation, composting and anaerobic digestion, with associated land application, are increasingly being considered as alternative waste management strategies to landfilling and incineration of municipal solid waste (MSW). Environmental life cycle assessments are a useful tool in political decision-making about waste management strategies. However, due to the diversity of processed organic MSW and the situations in which it can be applied, the environmental impacts of land application are very hard to determine by experimental means. In the current study, we used the agroecosystem model Daisy to simulate a range of different scenarios representing different geographical areas, farm and soil types under Danish conditions and legislation. Generally, the application of processed organic MSW resulted in increased emissions compared with the corresponding standard scenarios, but with large differences between scenarios. Emission coefficients for nitrogen leaching to the groundwater ranged from 0.03 to 0.87, while those for nitrogen lost to surface waters through tile drains ranged from 0 to 0.30. Emission coefficients for N2O formation ranged from 0.013 to 0.022 and for ammonia volatilization from 0.016 to 0.11. These estimates are within reasonable range of observed values under similar conditions. Furthermore, a sensitivity analysis showed that the estimates were not very sensitive to the mineralization dynamics of the processed organic MSW. The results show that agroecosystem models can be powerful tools to estimate the environmental impacts of land application of processed MSW under different conditions. Despite this, agroecosystem models have only been used to a very limited degree for this purpose

Inertial amplification of continuous structures: Large band gaps from small masses

Wave motion in a continuous elastic rod with a periodically attached inertial-amplification mechanism is investigated. The mechanism has properties similar to an "inerter" typically used in vehicle suspensions, however here it is constructed and utilized in a manner that alters the intrinsic properties of a continuous structure. The elastodynamic band structure of the hybrid rod-mechanism structure yields band gaps that are exceedingly wide and deep when compared to what can be obtained using standard local resonators, while still being low in frequency. With this concept, a large band gap may be realized with as much as twenty times less added mass compared to what is needed in a standard local resonator configuration. The emerging inertially enhanced continuous structure also exhibits unique qualitative features in its dispersion curves. These include the existence of a characteristic double-peak in the attenuation constant profile within gaps and the possibility of coalescence of two neighbouring gaps creating a large contiguous gap.Comment: Manuscript is under review for journal publicatio

Interaction of nanofillers in injection-molded graphene/carbon nanotube reinforced PA66 hybrid nanocomposites

Abstract Interaction of multi-walled carbon nanotubes and graphene nanoplatelets within injection-molded thermoplastic-based nanocomposites is investigated. The research shows how the nanofillers’ combination ratio and content influence the properties in the semicrystalline thermoplastic-based composites. Three main groups of polyamide-based composite specimens containing either or both of the nanofillers are prepared. Results show that the single inclusion of the nanomaterials improves the mechanical and thermal properties significantly. However, the combined incorporation of both the nanofillers in the polymeric matrix does not lead to the linear combination of the observed behaviors. While the mechanical properties and the degrees of crystallinity improve, the thermal conductivities decrease in the hybrid composites for similar nanofiller contents. Rheological and crystallization investigations also showed the dominant influence of the nanotubes in the structure of the hybrid composites. The underlying mechanisms of modulation in the properties were also investigated in detail.</jats:p

CT versus FDG-PET/CT response evaluation in patients with metastatic colorectal cancer treated with irinotecan and cetuximab

We compared morphologic computed tomography (CT)-based to metabolic fluoro-deoxy-glucose (FDG) positron emission tomography (PET)/CT-based response evaluation in patients with metastatic colorectal cancer and correlated the findings with survival and KRAS status. From 2006 to 2009, patients were included in a phase II trial and treated with cetuximab and irinotecan every second week. They underwent FDG-PET/CT examination at baseline and after every fourth treatment cycle. Response evaluation was performed prospectively according to Response Evaluation Criteria in Solid Tumors (RECIST 1.0) and retrospectively according to Positron Emission Tomography Response Criteria in Solid Tumors (PERCIST). Best overall responses were registered. Sixty-one patients were eligible for response evaluation. Partial response (PR) rate was 18%, stable disease (SD) rate 64%, and progressive disease (PD) rate 18%. Partial metabolic response (PMR) rate was 56%, stable metabolic disease rate 33%, and progressive metabolic disease (PMD) rate 11%. Response agreement was poor, κ-coefficient 0.19. Hazard ratio for overall survival for responders (PR/PMR) versus nonresponders (PD/PMD) was higher for CT- than for FDG-PET/CT evaluation. Within patients with KRAS mutations, none had PR but 44% had PMR. In conclusion, morphologic and metabolic response agreement was poor primarily because a large part of the patients shifted from SD with CT evaluation to PMR when evaluated with FDG-PET/CT. Furthermore, a larger fraction of the patients with KRAS mutations had a metabolic treatment response