Influence of Process Parameters on Synthesis of Biochar by Pyrolysis of Biomass: An Alternative Source of Energy

Organic matter derived from plants and animals are known as biomass. It has a great potential to be used as an alternate source of energy by employing thermochemical conversion techniques. Among the available techniques, pyrolysis is considered to be the most efficient technique used for the conversion of biomass-based waste into value-added solid, liquid and gaseous products through heating in an oxygen-limited environment. Biochar (solid fuel) is a carbonaceous material and has multiple applications in various fields such as soil health, climate stability, water resource, energy efficiency and conservation. The yield of biochar depends on organic constituents of biomass and the pyrolytic process parameters such as temperature, time, heating rate, purging gas, particle size, catalyst, flow rate, pressure and types of pyrolysis reactors. Suitable conditions for biochar production were observed to be slow pyrolysis, low carrier gas flow rate, acid-catalysed biomass or biomass mixed with some inorganic salts, low heating rate, large particle size, high pressure, longer residence time, low temperature, feedstocks with high lignin content and pyrolysis reactors with lower bed height. Thermal conversion of biomass could be a possible sustainable alternative to provide economically viable, clean and eco-friendly solid fuel

A hybrid flux balance analysis and machine learning pipeline elucidates the metabolic response of cyanobacteria to different growth conditions

Machine learning has recently emerged as a promising tool for inferring multi-omic relationships in biological systems. At the same time, genome-scale metabolic models (GSMMs) can be integrated with such multi-omic data to refine phenotypic predictions. In this work, we use a multi-omic machine learning pipeline to analyze a GSMM of Synechococcus sp. PCC 7002, a cyanobacterium with large potential to produce renewable biofuels. We use regularized flux balance analysis to observe flux response between conditions across photosynthesis and energy metabolism. We then incorporate principal-component analysis, k-means clustering, and LASSO regularization to reduce dimensionality and extract key cross-omic features. Our results suggest that combining metabolic modeling with machine learning elucidates mechanisms used by cyanobacteria to cope with fluctuations in light intensity and salinity that cannot be detected using transcriptomics alone. Furthermore, GSMMs introduce critical mechanistic details that improve the performance of omic-based machine learning methods

Hybrid technologies for remediation of recalcitrant industrial wastewater

In metal machining processes, the regulation of heat generation and lubrication at the contact point are achieved by application of a fluid referred to as metalworking fluid (MWF). This has the combined features of the cooling properties of water and lubricity of oil. MWFs inevitably become operationally exhausted with age and intensive use, which leads to compromised properties, thereby necessitating their safe disposal. Disposal of this waste through a biological route is an increasingly attractive option, since it is effective with relatively low energy demands when compared to current physical and chemical options. However, biological treatment is challenging since MWF are chemically complex, including the addition of toxic biocides which are added specifically to retard microbial deterioration whilst the fluids are operational. This makes bacterial treatment exceptionally challenging and has stimulated the search and need to assess technologies which complement biological treatment. In this study the remediation, specifically of the recalcitrant component of a semi-synthetic MWF, employing a novel hybrid treatment approach consisting of both bacteriological and chemical treatment, was investigated. Three chemical pre-treatment methods (Fenton’s oxidation, nano-zerovalent iron (nZVI) oxidation and ozonation) of the recalcitrant components followed by bacterial degradation were examined. The synergistic interaction of Fenton’s-biological oxidation and nZVI-biodegradation led to an overall COD reduction of 92% and 95.5% respectively, whereas pre-treatment with ozone reduced the total pollution load by 70% after a post-biological step. An enhancement in biodegradability was observed after each of the chemical treatments, thus facilitating the overall treatment process. The findings from this study established that the use of non-pathogenic microorganisms to remediate organic materials present in MWF wastewater is a favourable alternative to energy demanding physical and chemical treatment options. However, optimal performance of this biological process may require chemical enhancement, particularly for those components that are resistant to biological transformation

Successful <i style="">in situ</i> oil bioremediation programmes — Key parameters

495-501Naturally occurring microbial consortia have been utilized in a variety of bioremediation processes. One important characteristic of bioremediation is that it is carried out in non-sterile open environments, which contain a host of microorganisms. Successful in situ bioremediation strategy should be tailored in such a manner that due consideration be given to the various environmental constraints (salinity, nutrient availability, anaerobic degradation, bioavailability considerations) that affect a particular location

Hybrid technologies for remediation of recalcitrant industrial wastewater

In metal machining processes, the regulation of heat generation and lubrication at the contact point are achieved by application of a fluid referred to as metalworking fluid (MWF). This has the combined features of the cooling properties of water and lubricity of oil. MWFs inevitably become operationally exhausted with age and intensive use, which leads to compromised properties, thereby necessitating their safe disposal. Disposal of this waste through a biological route is an increasingly attractive option, since it is effective with relatively low energy demands when compared to current physical and chemical options. However, biological treatment is challenging since MWF are chemically complex, including the addition of toxic biocides which are added specifically to retard microbial deterioration whilst the fluids are operational. This makes bacterial treatment exceptionally challenging and has stimulated the search and need to assess technologies which complement biological treatment. In this study the remediation, specifically of the recalcitrant component of a semi-synthetic MWF, employing a novel hybrid treatment approach consisting of both bacteriological and chemical treatment, was investigated. Three chemical pre-treatment methods (Fenton’s oxidation, nano-zerovalent iron (nZVI) oxidation and ozonation) of the recalcitrant components followed by bacterial degradation were examined. The synergistic interaction of Fenton’s-biological oxidation and nZVI-biodegradation led to an overall COD reduction of 92% and 95.5% respectively, whereas pre-treatment with ozone reduced the total pollution load by 70% after a post-biological step. An enhancement in biodegradability was observed after each of the chemical treatments, thus facilitating the overall treatment process. The findings from this study established that the use of non-pathogenic microorganisms to remediate organic materials present in MWF wastewater is a favourable alternative to energy demanding physical and chemical treatment options. However, optimal performance of this biological process may require chemical enhancement, particularly for those components that are resistant to biological transformation.EThOS - Electronic Theses Online ServiceGBUnited Kingdo

Identification, characterization, and lipid profiling of microalgae Scenedesmus sp. NC1, isolated from coal mine effluent with potential for biofuel production

An autoflocculating microalgal strain was isolated from coal mine effluent wastewater which was named as Scenedesmus sp. NC1 after morphological and molecularly characterization. Further analysis of internal transcribed spacer 2 (ITS2) and compensatory base changes (CBCs) showed it does not belong to the clade comprising Scenedesmus sensu stricto. In stationary phase of growth, Scenedesmus sp. NC1 exhibited excellent autoflocculation efficiency (> 88 %) within 150 min of setting. Temperature, pH, and inorganic metals exhibited minor influence on the autoflocculation activity of Scenedesmus sp. NC1. The fatty acid profiling of Scenedesmus sp.NC1 showed that palmitic acid (C16:0), oleic acid (C18:1), and stearic acid (18:0) accounted for more than 68 % of total fatty acids. Moreover, Scenedesmus sp. NC1 demonstrated significant bioflocculation potential over non-flocculating freshwater microalgae, Chlorella sp. NCQ and Micractinium sp. NCS2. Hence, Scenedesmus sp. NC1 could be effective for economical harvesting of other non-flocculating microalgae for productions of biodiesel and other metabolites

Harmonisation of chemical and biological process in development of a hybrid technology for treatment of recalcitrant metalworking fluid.

Disposal of operationally exhausted metalworking fluids (MWFs) is enormously challenging. In this study the feasibility of employing a sequential Fenton-biological oxidation for the treatment of recalcitrant components of MWF wastewater was investigated. A statistical experimental design was employed to address Fenton reagent (H₂O₂, Fe²⁺) dose optimisation which ensured minimal concentrations of the reagents, thus making the treatment environmentally less toxic to subsequent biological steps and economically viable. This was achieved by employing a five-level-two-variable central composite experimental design. The results demonstrated that Fenton pre-treatment of the MWF effluent greatly improved biodegradability index (BOD₅)/COD increased from 0.160 to 0.538) with a synchronous lowering in the toxicity of the wastewater, making the recalcitrant component more amenable to subsequent biological treatment. An overall decrease of 92% and 86% in chemical oxygen demand (COD) and total organic carbon (TOC), respectively, was achieved by the two-step treatment method developed

Treatment of waste metalworking fluid by a hybrid ozone-biological process.

In metal machining processes, the regulation of heat generation and lubrication at the contact point are achieved by application of a fluid referred to as metalworking fluid (MWF). MWFs inevitably become operationally exhausted with age and intensive use, which leads to compromised properties, thereby necessitating their safe disposal. Disposal of this waste through a biological route is an increasingly attractive option, since it is effective with relatively low energy demands. However, successful biological treatment is challenging since MWFs are chemically complex, and include biocides specifically to retard microbial deterioration whilst the fluids are operational. In this study remediation of the recalcitrant component of a semi-synthetic MWF by a novel hybrid ozone-bacteriological treatment, was investigated. The hybrid treatment proved to be effective and reduced the chemical oxygen demand by 72% (26.9% and 44.9% reduction after ozonation and biological oxidation respectively). Furthermore, a near-complete degradation of three non-biodegradable compounds (viz. benzotriazole, monoethanolamine, triethanolamine), commonly added as biocides and corrosion inhibitors in MWF formulations, under ozonation was observed

A novel hybrid nano zerovalent iron initiated oxidation--biological degradation approach for remediation of recalcitrant waste metalworking fluids.

Disposal of operationally exhausted metal working fluids (MWF) through a biological route is an attractive option, since it is effective with relatively low energy demands. However, it is enormously challenging since these fluids are chemically complex, including the addition of toxic biocides which are added specifically to retard bio-deterioration whilst the fluids are operational. Nano-sized elemental iron represents a new generation of environmental remediation technologies. Laboratory scale batch studies were performed to test the degradation ability of a semi-synthetic metalworking fluid (MWF) wastewater (which was found to be resistant to initial bacterial treatment in specifically established bioreactors) by employing a novel hybrid approach. The approach was to combine the synergistic effects of nano zerovalent iron (nZVI) induced oxidation, followed by biodegradation, specifically for the remediation of recalcitrant components of MWF effluent. Addition of nZVI particles to oxygenated wastewater resulted in oxidation of organic contaminants present. Our studies confirmed 78% reduction in chemical oxygen demand (COD) by nZVI oxidation at pH 3.0 and 67% reduction in neutral pH (7.5), and 85% concurrent reduction in toxicity. Importantly, this low toxicity made the nZVI treated effluent more amenable for a second stage biological oxidation step. An overall COD reduction of 95.5% was achieved by the novel combined treatment described, demonstrating that nZVI oxidation can be exploited for enhancing the biodegradability of a recalcitrant wastewater in treatment processes