3,925 research outputs found

    On the stability of high-speed milling with spindle speed variation

    Get PDF
    Spindle speed variation is a well-known technique to suppress regenerative machine tool vibrations, but it is usually considered to be effective only for low spindle speeds. In this paper, the effect of spindle speed variation is analyzed in the high-speed domain for spindle speeds corresponding to the first flip (period doubling) and to the first Hopf lobes. The optimal amplitudes and frequencies of the speed modulations are computed using the semidiscre- tization method. It is shown that period doubling chatter can effectively be suppressed by spindle speed variation, although, the technique is not effective for the quasiperiodic chatter above the Hopf lobe. The results are verified by cutting tests. Some special cases are also discussed where the practical behavior of the system differs from the predicted one in some ways. For these cases, it is pointed out that the concept of stability is understood on the scale of the principal period of the system—that is, the speed modulation period for variable spindle speed machining and the tooth passing period for constant spindle speed machining

    Electrically Tunable Excitonic Light Emitting Diodes based on Monolayer WSe2 p-n Junctions

    Full text link
    Light-emitting diodes are of importance for lighting, displays, optical interconnects, logic and sensors. Hence the development of new systems that allow improvements in their efficiency, spectral properties, compactness and integrability could have significant ramifications. Monolayer transition metal dichalcogenides have recently emerged as interesting candidates for optoelectronic applications due to their unique optical properties. Electroluminescence has already been observed from monolayer MoS2 devices. However, the electroluminescence efficiency was low and the linewidth broad due both to the poor optical quality of MoS2 and to ineffective contacts. Here, we report electroluminescence from lateral p-n junctions in monolayer WSe2 induced electrostatically using a thin boron nitride support as a dielectric layer with multiple metal gates beneath. This structure allows effective injection of electrons and holes, and combined with the high optical quality of WSe2 it yields bright electroluminescence with 1000 times smaller injection current and 10 times smaller linewidth than in MoS2. Furthermore, by increasing the injection bias we can tune the electroluminescence between regimes of impurity-bound, charged, and neutral excitons. This system has the required ingredients for new kinds of optoelectronic devices such as spin- and valley-polarized light-emitting diodes, on-chip lasers, and two-dimensional electro-optic modulators.Comment: 13 pages main text with 4 figures + 4 pages upplemental material

    Clinical practice guidelines for the foot and ankle in rheumatoid arthritis: a critical appraisal

    Get PDF
    Background: Clinical practice guidelines are recommendations systematically developed to assist clinical decision-making and inform healthcare. In current rheumatoid arthritis (RA) guidelines, management of the foot and ankle is under-represented and the quality of recommendation is uncertain. This study aimed to identify and critically appraise clinical practice guidelines for foot and ankle management in RA. Methods: Guidelines were identified electronically and through hand searching. Search terms 'rheumatoid arthritis', 'clinical practice guidelines' and related synonyms were used. Critical appraisal and quality rating were conducted using the Appraisal of Guidelines for Research and Evaluation (AGREE) II instrument. Results: Twenty-four guidelines were included. Five guidelines were high quality and recommended for use. Five high quality and seven low quality guidelines were recommended for use with modifications. Seven guidelines were low quality and not recommended for use. Five early and twelve established RA guidelines were recommended for use. Only two guidelines were foot and ankle specific. Five recommendation domains were identified in both early and established RA guidelines. These were multidisciplinary team care, foot healthcare access, foot health assessment/review, orthoses/insoles/splints, and therapeutic footwear. Established RA guidelines also had an 'other foot care treatments' domain. Conclusions: Foot and ankle management for RA features in many clinical practice guidelines recommended for use. Unfortunately, supporting evidence in the guidelines is low quality. Agreement levels are predominantly 'expert opinion' or 'good clinical practice'. More research investigating foot and ankle management for RA is needed prior to inclusion in clinical practice guidelines

    Ferritins: furnishing proteins with iron

    Get PDF
    Ferritins are a superfamily of iron oxidation, storage and mineralization proteins found throughout the animal, plant, and microbial kingdoms. The majority of ferritins consist of 24 subunits that individually fold into 4-α-helix bundles and assemble in a highly symmetric manner to form an approximately spherical protein coat around a central cavity into which an iron-containing mineral can be formed. Channels through the coat at inter-subunit contact points facilitate passage of iron ions to and from the central cavity, and intrasubunit catalytic sites, called ferroxidase centers, drive Fe2+ oxidation and O2 reduction. Though the different members of the superfamily share a common structure, there is often little amino acid sequence identity between them. Even where there is a high degree of sequence identity between two ferritins there can be major differences in how the proteins handle iron. In this review we describe some of the important structural features of ferritins and their mineralized iron cores and examine in detail how three selected ferritins oxidise Fe2+ in order to explore the mechanistic variations that exist amongst ferritins. We suggest that the mechanistic differences reflect differing evolutionary pressures on amino acid sequences, and that these differing pressures are a consequence of different primary functions for different ferritins

    AdS_3/LCFT_2 - Correlators in Cosmological Topologically Massive Gravity

    Full text link
    For cosmological topologically massive gravity at the chiral point we calculate momentum space 2- and 3-point correlators of operators in the postulated dual CFT on the cylinder. These operators are sourced by the bulk and boundary gravitons. Our correlators are fully consistent with the proposal that cosmological topologically massive gravity at the chiral point is dual to a logarithmic CFT. In the process we give a complete classification of normalizable and non-normalizeable left, right and logarithmic solutions to the linearized equations of motion in global AdS_3.Comment: 39 pages + appendices, 1 eps figure, v2: minor changes in text in 4.1.2, corrected typo in (2.31

    An Alternative Yukawa Unified SUSY Scenario

    Full text link
    Supersymmetric SO(10) Grand Unified Theories with Yukawa unification represent an appealing possibility for physics beyond the Standard Model. However Yukawa unification is made difficult by large threshold corrections to the bottom mass. Generally one is led to consider models where the sfermion masses are large in order to suppress these corrections. Here we present another possibility, in which the top and bottom GUT scale Yukawa couplings are equal to a component of the charged lepton Yukawa matrix at the GUT scale in a basis where this matrix is not diagonal. Physically, this weak eigenstate Yukawa unification scenario corresponds to the case where the charged leptons that are in the 16 of SO(10) containing the top and bottom quarks mix with their counterparts in another SO(10) multiplet. Diagonalizing the resulting Yukawa matrix introduces mixings in the neutrino sector. Specifically we find that for a large region of parameter space with relatively light sparticles, and which has not been ruled out by current LHC or other data, the mixing induced in the neutrino sector is such that sin22Θ231sin^2 2\Theta_{23} \approx 1, in agreement with data. The phenomenological implications are analyzed in some detail.Comment: 32 pages, 22 Figure

    Interstellar Dust Close to the Sun

    Get PDF
    The low density interstellar medium (ISM) close to the Sun and inside of the heliosphere provides a unique laboratory for studying interstellar dust grains. Grain characteristics in the nearby ISM are obtained from observations of interstellar gas and dust inside of the heliosphere and the interstellar gas towards nearby stars. Comparison between the gas composition and solar abundances suggests that grains are dominated by olivines and possibly some form of iron oxide. Measurements of the interstellar Ne/O ratio by the Interstellar Boundary Explorer spacecraft indicate that a high fraction of interstellar oxygen in the ISM must be depleted onto dust grains. Local interstellar abundances are consistent with grain destruction in ~150 km/s interstellar shocks, provided that the carbonaceous component is hydrogenated amorphous carbon and carbon abundances are correct. Variations in relative abundances of refractories in gas suggest variations in the history of grain destruction in nearby ISM. The large observed grains, > 1 micron, may indicate a nearby reservoir of denser ISM. Theoretical three-dimensional models of the interaction between interstellar dust grains and the solar wind predict that plumes of about 0.18 micron dust grains form around the heliosphere.Comment: 2011 AGOS Taiwan meeting; accepted for publication in Earth, Planets and Spac

    Vision and visual history in elite-/near-elite level cricketers and rugby-league players

    Get PDF
    Background: The importance of optimal and/or superior vision for participation in high-level sport remains the subject of considerable clinical research interest. Here we examine the vision and visual history of elite/near-elite cricketers and rugby-league players. Methods: Stereoacuity (TNO), colour vision, and distance (with/without pinhole) and near visual acuity (VA) were measured in two cricket squads (elite/international-level, female, n=16; near-elite, male, n=23) and one professional rugby-league squad (male, n=20). Refractive error was determined, and details of any correction worn and visual history were recorded. Results: Overall, 63% had their last eye-examination within 2 years. However, some had not had an eye examination for 5 years, or had never had one (near-elite-cricketers: 30%; rugby-league players: 15%; elite-cricketers: 6%). Comparing our results for all participants to published data for young, optimally-corrected, non-sporting adults, distance VA was ~1 line of letters worse than expected. Adopting α=0.01, the deficit in distance-VA deficit was significant, but only for elite-cricketers (p0.02 for all comparisons). On average, stereoacuity was better than in young adults, but only in elite-cricketers (p<0.001; p=0.03, near-elite-cricketers; p=0.47, rugby-league -players). On-field visual issues were present in 27% of participants, and mostly (in 75% of cases) comprised uncorrected ametropia. Some cricketers (near-elite: 17.4%; elite: 38%) wore refractive correction during play but no rugby-league player did. Some individuals with prescribed correction choose not to wear it when playing. Conclusion: Aside from near stereoacuity in elite-cricketers, these basic visual abilities were not better than equivalent, published data for optimally-corrected adults. 20-25% exhibited sub-optimal vision, suggesting that the clearest possible vision might not be critical for participation at the highest levels in the sports of cricket or rugby-league. Although vision could be improved in a sizeable proportion of our sample, the impact of correcting these, mostly subtle, refractive anomalies on playing performance is unknown
    corecore