427 research outputs found
The correlation of dust and gas emission in star-forming environments
This is the final version of the article. Available from the publisher via the DOI in this record.We present ammonia maps of portions of the W3 and Perseus molecular clouds in order to compare gas emission with submillimetre continuum thermal emission which are commonly used to trace the same mass component in star-forming regions, often under the assumption of local thermodynamic equilibrium (LTE). The Perseus and W3 star-forming regions are found to have significantly different physical characteristics consistent with the difference in size scales traced by our observations. Accounting for the distance of theW3 region does not fully reconcile these differences, suggesting that there may be an underlying difference in the structure of the two regions. Peak positions of submillimetre and ammonia emission do not correlate strongly. Also, the extent of diffuse emission is only moderately matched between ammonia and thermal emission. Source sizes measured from our observations are consistent between regions, although there is a noticeable difference between the submillimetre source sizes with sources in Perseus being significantly smaller than those in W3. Fractional abundances of ammonia are determined for our sources which indicate a dip in the measured ammonia abundance at the positions of peak submillimetre column density. Virial ratios are determined which show that our sources are generally bound in both regions, although there is considerable scatter in both samples. We conclude that sources in Perseus are bound on smaller scales than in W3 in a way that may reflect their previous identification as low-and high-mass, respectively. Our results indicate that assumptions of local thermal equilibrium and/or the coupling of the dust and gas phases in star-forming regions may not be as robust as commonly assumed. © 2014 The Authors Published by Oxford University Press on behalf of the Royal Astronomical Society.The authors would like to thank Neal Evans and Erik Rosolowsky
for insightful and thorough comments on this work which have considerably
improved its quality. The authors acknowledge the data
analysis facilities provided by the Starlink Project under continual
development by the JAC. In addition, the following Starlink packages
have been used: Kappa, Cupid, GAIA, Convert and Coco. We
would like to thank the helpful staff of the GBT in the collection of
data used in this paper related to the project GBT10C_024. LKM is
supported by a STFC postdoctoral grant (ST/G001847/1) and DJE
is supported by a STFC PhD studentship. This research would not
have been possible without the SIMBAD astronomical data base service operated at CDS, Strasbourg, France and the NASA Astrophysics
Data System Bibliographic Services
Recommended from our members
Representativity error for temperature and humidity using the Met Office high-resolution model
The observation-error covariance matrix used in data assimilation contains contributions from instrument errors, representativity errors and errors introduced by the approximated observation operator. Forward model errors arise when the observation operator does not correctly model the observations or when observations can resolve spatial scales that the model cannot. Previous work to estimate the observation-error covariance matrix for particular observing instruments has shown that it contains signifcant correlations. In particular, correlations for humidity data are more significant than those for temperature. However it is not known what proportion of these correlations can be attributed to the representativity errors. In this article we apply an existing method for calculating representativity error, previously applied to an idealised system, to NWP data. We calculate horizontal errors of representativity for temperature and humidity using data from the Met Office high-resolution UK variable resolution model. Our results show that errors of representativity are correlated and more significant for specific humidity than temperature. We also find that representativity error varies with height. This suggests that the assimilation scheme may be improved if these errors are explicitly included in a data assimilation scheme.
This article is published with the permission of the Controller of HMSO and the Queen's Printer for Scotland
The almost ubiquitous association of 6.7-GHz methanol masers with dust
We report the results of 870-μm continuum observations, using the Large APEX Bolometer Camera, towards 77 class-II, 6.7-GHz methanol masers identified by the Methanol MultiBeam (MMB) survey to map the thermal emission from cool dust towards these objects. These data complement a study of 630 methanol masers associated with compact dense clumps identified from the APEX Telescope Large Area Survey of the Galaxy (ATLASGAL) survey. Compact dust emission is detected towards 70 sources, which implies a dust-association rate of 99 per cent for the full MMB catalogue. Evaluation of the derived dust and maser properties leads us to conclude that the combined sample represents a single population tracing the same phenomenon. We find median clump masses of a few 103 M⊙ and that all but a handful of sources satisfy the mass–size criterion required for massive star formation. This study provides the strongest evidence of the almost ubiquitous association of methanol masers with massive, star-forming clumps. The fraction of methanol-maser associated clumps is a factor of ∼2 lower in the outer Galaxy than the inner Galaxy, possibly a result of the lower metallicity environment of the former. We find no difference in the clump-mass and maser-luminosity distributions of the inner and outer Galaxy. The maser-pumping and clump formation mechanisms are therefore likely to be relatively invariant to Galactic location. Finally, we use the ratio of maser luminosity and clump mass to investigate the hypothesis that the maser luminosity is a good indicator of the evolutionary stage of the embedded source, however, we find no evidence to support this
Virological sampling of inaccessible wildlife with drones
© 2018 by the authors. Licensee MDPI, Basel, Switzerland. There is growing interest in characterizing the viromes of diverse mammalian species, particularly in the context of disease emergence. However, little is known about virome diversity in aquatic mammals, in part due to difficulties in sampling. We characterized the virome of the exhaled breath (or blow) of the Eastern Australian humpback whale (Megaptera novaeangliae). To achieve an unbiased survey of virome diversity, a meta-transcriptomic analysis was performed on 19 pooled whale blow samples collected via a purpose-built Unmanned Aerial Vehicle (UAV, or drone) approximately 3 km off the coast of Sydney, Australia during the 2017 winter annual northward migration from Antarctica to northern Australia. To our knowledge, this is the first time that UAVs have been used to sample viruses. Despite the relatively small number of animals surveyed in this initial study, we identified six novel virus species from five viral families. This work demonstrates the potential of UAVs in studies of virus disease, diversity, and evolution
The RMS survey: Ammonia mapping of the environment of young massive stellar objects - II
We present the results from NH3 mapping observations towards 34 regions identified by the Red MSX Source (RMS) survey. We have used the Australia Telescope Compact Array to map ammonia (1, 1) and (2, 2) inversion emission spectra at a resolution of 10 arcsec with velocity channel resolution of 0.4 km s−1 towards the positions of embedded massive star formation. Complementary data have been used from the ATLASGAL and GLIMPSE Legacy Surveys in order to improve the understanding of the regions and to estimate physical parameters for the environments. The fields have typical masses of ∼1000 M⊙, radii of ∼0.15 pc, and distances of ∼3.5 kpc. Luminosities range between ∼103 and ∼106 L⊙ and kinetic temperatures between 10 and 40 K. We classify each field into one of two subsets in order to construct an evolutionary system for massive star formation in these regions based on the morphology and relative positions of the NH3 emission, RMS sources, and ATLASGAL thermal dust emission. Differences in morphology between NH3 emission and ATLASGAL clumps are shown to correspond to evolutionary stages of ongoing massive star formation in these regions. The study has been further refined by including the positions of known methanol and water masers in the regions to gain insight into possible protostellar regions and triggered star formation
ATLASGAL - physical parameters of dust clumps associated with 6.7 GHz methanol masers
We have constructed the largest sample of dust-associated class II 6.7 GHz methanol masers yet obtained. New measurements from the Methanol Multibeam (MMB) survey were combined with the 870 μm APEX Telescope Large Area Survey of the Galaxy (ATLASGAL) and the 850 μm JCMT Plane Survey (JPS). Together with two previous studies we have now identified the host clumps for 958 methanol masers across the Galactic Plane, covering approximately 99 per cent of the MMB catalogue and increasing the known sample of dust-associated masers by over 30 per cent. We investigate correlations between the physical properties of the clumps and masers using distances and luminosities drawn from the literature. Clumps hosting methanol masers are significantly more compact and have higher volume densities than the general population of clumps. We determine a minimum volume density threshold of n(H2) ≥ 104 cm−3 for the efficient formation of intermediate- and high-mass stars. We find 6.7 GHz methanol masers are associated with a distinct part of the evolutionary process (Lbol/Mfwhm ratios of between 100.6 and 102.2) and have well-defined turning on and termination points. We estimate the lower limit for the mass of embedded objects to be ≥6 M⊙ and the statistical lifetime of the methanol maser stage to be ∼3.3 × 104 yr. This suggests that methanol masers are indeed reliable tracers of high-mass star formation, and indicates that the evolutionary period traced by this marker is relatively rapid
Proposing a systems vision of knowledge management in emergency care
This paper makes a case for taking a systems view of knowledge management within health-care provision, concentrating on the emergency care process in the UK National Health Service. It draws upon research in two casestudy organizations (a hospital and an ambulance service). The case-study organizations appear to be approaching knowledge (and information) management in a somewhat fragmented way. They are trying to think more holistically, but (perhaps) because of the ways their organizations and their work are structured, they cannot ‘see’ the whole of the care process. The paper explores the complexity of knowledge management in emergency health care and draws the distinction for knowledge management between managing local and operational knowledge, and global and clinical knowledge
ATLASGAL - star forming efficiencies and the Galactic star formation rate
The ATLASGAL survey has characterized the properties of approximately 1000 embedded H ii regions and found an empirical relationship between the clump mass and bolometric luminosity that covers 3-4 orders of magnitude. Comparing this relation with simulated clusters drawn from an initial mass function and using different star formation efficiencies we find that a single value is unable to fit the observed luminosity to mass (L/M) relation. We have used a Monte Carlo simulation to generate 200 000 clusters using the L/M-ratio as a constraint to investigate how the star formation efficiency changes as a function of clump mass. This has revealed that the star formation efficiency decreases with increasing clump mass with a value of 0.2 for clumps with masses of a few hundred solar masses and dropping to 0.08 for clumps with masses of a few thousand solar masses. We find good agreement between our results and star formation efficiencies determined from counts of embedded objects in nearby molecular clouds. Using the star formation efficiency relationship and the infrared excess time for embedded star formation of 2 ± 1 Myr we estimate the Galactic star formation rate to be approximately 0.9 ± 0.45 M· yr-1, which is in good agreement with previously reported values. This model has the advantage of providing a direct means of determining the star formation rate and avoids the difficulties encountered in converting infrared luminosities to stellar mass that affect previous galactic and extragalactic studies
ATLASGAL - properties of compact H II regions and their natal clumps
We present a complete sample of molecular clumps containing compact and ultracompact HII (UC HII) regions between ℓ = 10° and 60° and |b| < 1°, identified by combining the APEX Telescope Large Area Survey ofthe Galaxy submm and CORNISH radio continuum surveys with visual examination ofarchival infrared data. Our sample is complete to optically thin, compact and UC HII regions driven by a zero-age main-sequence star of spectral type B0 or earlier embedded within a 1000M clump. In total we identify 213 compact and UC HII regions, associated with 170 clumps. Unambiguous kinematic distances are derived for these clumps and used to estimate their masses and physical sizes, as well as the Lyman continuum fluxes and sizes of their embedded HII regions. We find a clear lower envelope for the surface density of molecular clumps hosting massive star formation of 0.05 g cm, which is consistent with a similar sample of clumps associated with 6.7 GHz masers. The mass of the most massive embedded starsis closely correlated with the mass of their natal clump. Young B stars appearto be significantly more luminous in the ultraviolet than predicted by current stellar atmosphere models. The properties of clumps associated with compact and UC HII regions are very similar to those associated with 6.7 GHz methanol masers and we speculate that there is little evolution in the structure of the molecular clumps between these two phases. Finally, we identifya significant peak in the surface density of compact and UC HII-regions associated with the W49A star-forming complex, noting that this complex is truly one of the most massive and intense regions of star formation in the Galaxy. © 2013 The Authors, Published by Oxford University Press on behalf of the Royal Astronomical Society
Selecting information technology for physicians' practices: a cross-sectional study
BACKGROUND: Many physicians are transitioning from paper to electronic formats for billing, scheduling, medical charts, communications, etc. The primary objective of this research was to identify the relationship (if any) between the software selection process and the office staff's perceptions of the software's impact on practice activities. METHODS: A telephone survey was conducted with office representatives of 407 physician practices in Oregon who had purchased information technology. The respondents, usually office managers, answered scripted questions about their selection process and their perceptions of the software after implementation. RESULTS: Multiple logistic regression revealed that software type, selection steps, and certain factors influencing the purchase were related to whether the respondents felt the software improved the scheduling and financial analysis practice activities. Specifically, practices that selected electronic medical record or practice management software, that made software comparisons, or that considered prior user testimony as important were more likely to have perceived improvements in the scheduling process than were other practices. Practices that considered value important, that did not consider compatibility important, that selected managed care software, that spent less than $10,000, or that provided learning time (most dramatic increase in odds ratio, 8.2) during implementation were more likely to perceive that the software had improved the financial analysis process than were other practices. CONCLUSION: Perhaps one of the most important predictors of improvement was providing learning time during implementation, particularly when the software involves several practice activities. Despite this importance, less than half of the practices reported performing this step
- …