Standardization of the Fully Stapled Laparoscopic Roux-en-Y Gastric Bypass for Obesity Reduces Early Immediate Postoperative Morbidity and Mortality: A Single Center Study on 2606 Patients

Various techniques of laparoscopic Roux-en-Y gastric bypass have been described. We completely standardized this procedure to minimize its sometimes substantial morbidity and mortality. This study describes our experience with the standardized fully stapled laparoscopic Roux-en-Y gastric bypass (FS-LRYGB) and its influence on the 30-day morbidity and mortality.status: publishe

Laparoscopic adjustable banded roux-en-y gastric bypass as a primary procedure for the super-super-obese (body mass index > 60 kg/m2)

<p>Abstract</p> <p>Background</p> <p>Currently, there is no consensus opinion regarding the optimal procedure of choice in super-super-morbid obesity (Body mass index, BMI > 60 kg/m2). Roux-en-Y gastric bypass (RYGB) is associated with failure to achieve or maintain 50% excess weight loss (EWL) or BMI < 35 in approximately 15% of patients. Also, percent EWL is significantly less after 1-year in the super-super-obese group as compared with the less obese group and many patients are still technically considered to be obese (lowest post-surgical BMI > 35) following RYGB surgery in this group. The addition of adjustable gastric band (AGB) to RYGB has been reported as a revisional procedure but this combined bariatric procedure has not been explored as a primary operation.</p> <p>Methods</p> <p>In a primary laparoscopic RYGB, an AGB is drawn around the gastric pouch through a small opening between the blood vessels on the lesser curve and the gastric pouch. The band is then fixed by suturing the gastric remnant to the gastric pouch both above and below the band to prevent slippage.</p> <p>Results</p> <p>Between November 2009 and March 2010, 6 consecutive super-super-obese patients underwent a primary laparoscopic adjustable banded Roux-en-Y gastric bypass procedure at our institution. One male patient (21 years, BMI 70 kg/m²) developed a pneumonia postoperatively. No other postoperative complications were observed.</p> <p>Conclusion</p> <p>To the best of our knowledge, this is the first series of patients that underwent a laparoscopic adjustable banded RYGB as a primary operation for the super-super obese in the indexed literature. With the combined procedure, a sequential action mechanism for weight loss is to be expected. The restrictive, malabsorptive and hormonal working mechanism of the RYGB will induce weight loss from the start reaching a stabilised plateau of weight after 12 - 18 months. At that time, filling of the band can be started resulting in further gastric pouch restriction and increased weight loss. Moreover, besides improving the results of total weight loss, a gradual filling of the band can as well prevent the RYGB patient from weight regain if restriction would fade away with time.</p

Passive and active ventricular elastances of the left ventricle

BACKGROUND: Description of the heart as a pump has been dominated by models based on elastance and compliance. Here, we are presenting a somewhat new concept of time-varying passive and active elastance. The mathematical basis of time-varying elastance of the ventricle is presented. We have defined elastance in terms of the relationship between ventricular pressure and volume, as: dP = EdV + VdE, where E includes passive (E(p)) and active (E(a)) elastance. By incorporating this concept in left ventricular (LV) models to simulate filling and systolic phases, we have obtained the time-varying expression for E(a )and the LV-volume dependent expression for E(p). METHODS AND RESULTS: Using the patient's catheterization-ventriculogram data, the values of passive and active elastance are computed. E(a )is expressed as: [Image: see text]; E(p)is represented as: [Image: see text]. E(a )is deemed to represent a measure of LV contractility. Hence, Peak dP/dt and ejection fraction (EF) are computed from the monitored data and used as the traditional measures of LV contractility. When our computed peak active elastance (E(a,max)) is compared against these traditional indices by linear regression, a high degree of correlation is obtained. As regards E(p), it constitutes a volume-dependent stiffness property of the LV, and is deemed to represent resistance-to-filling. CONCLUSIONS: Passive and active ventricular elastance formulae can be evaluated from a single-beat P-V data by means of a simple-to-apply LV model. The active elastance (E(a)) can be used to characterize the ventricle's contractile state, while passive elastance (E(p)) can represent a measure of resistance-to-filling

A custom-made guide-wire positioning device for Hip Surface Replacement Arthroplasty: description and first results

<p>Abstract</p> <p>Background</p> <p>Hip surface replacement arthroplasty (SRA) can be an alternative for total hip arthroplasty. The short and long-term outcome of hip surface replacement arthroplasty mainly relies on the optimal size and position of the femoral component. This can be defined before surgery with pre-operative templating. Reproducing the optimal, templated femoral implant position during surgery relies on guide wire positioning devices in combination with visual inspection and experience of the surgeon. Another method of transferring the templated position into surgery is by navigation or Computer Assisted Surgery (CAS). Though CAS is documented to increase accurate placement particularly in case of normal hip anatomy, it requires bulky equipment that is not readily available in each centre.</p> <p>Methods</p> <p>A custom made neck jig device is presented as well as the results of a pilot study.</p> <p>The device is produced based on data pre-operatively acquired with CT-scan. The position of the guide wire is chosen as the anatomical axis of the femoral neck. Adjustments to the design of the jig are made based on the orthopedic surgeon's recommendations for the drill direction. The SRA jig is designed as a slightly more-than-hemispherical cage to fit the anterior part of the femoral head. The cage is connected to an anterior neck support. Four knifes are attached on the central arch of the cage. A drill guide cylinder is attached to the cage, thus allowing guide wire positioning as pre-operatively planned.</p> <p>Custom made devices were tested in 5 patients scheduled for total hip arthroplasty. The orthopedic surgeons reported the practical aspects of the use of the neck-jig device. The retrieved femoral heads were analyzed to assess the achieved drill place in mm deviation from the predefined location and orientation compared to the predefined orientation.</p> <p>Results</p> <p>The orthopedic surgeons rated the passive stability, full contact with neck portion of the jig and knife contact with femoral head, positive. There were no guide failures. The jig unique position and the number of steps required to put the guide in place were rated 1, while the complexity to put the guide into place was rated 1-2. In all five cases the guide wire was accurately positioned. Maximum angular deviation was 2.9° and maximum distance between insertion points was 2.1 mm.</p> <p>Conclusions</p> <p>Pilot testing of a custom made jig for use during SRA indicated that the device was (1) successfully applied and user friendly and (2) allowed for accurate guide wire placement according to the preoperative plan.</p

Basic Science Considerations in Primary Total Hip Replacement Arthroplasty

Total Hip Replacement is one of the most common operations performed in the developed world today. An increasingly ageing population means that the numbers of people undergoing this operation is set to rise. There are a numerous number of prosthesis on the market and it is often difficult to choose between them. It is therefore necessary to have a good understanding of the basic scientific principles in Total Hip Replacement and the evidence base underpinning them. This paper reviews the relevant anatomical and biomechanical principles in THA. It goes on to elaborate on the structural properties of materials used in modern implants and looks at the evidence base for different types of fixation including cemented and uncemented components. Modern bearing surfaces are discussed in addition to the scientific basis of various surface engineering modifications in THA prostheses. The basic science considerations in component alignment and abductor tension are also discussed. A brief discussion on modular and custom designs of THR is also included. This article reviews basic science concepts and the rationale underpinning the use of the femoral and acetabular component in total hip replacement

2013 WSES guidelines for management of intra-abdominal infections

Peer reviewe

[The use of dexmedetomidine in extreme agitation].

BACKGROUND: In clinical practice antipsychotics, benzodiazepines and/or antihistamines are used to calm agitated patients. If agitation persists and patients have contraindications for these substances, then anesthetics, such as propofol, can also be used as well, to serve as a sedative. Our attention was drawn to a particular case in which dexmedetomidine was used as a sedative. AIM: To study the literature on the use of α2-agonists, such as dexmedetomidine, in the treatment of extreme agitation. METHOD: We reviewed the relevant scientific literature. RESULTS: α2-agonists, such as dexmedetomidine, are new anesthetic agents that have analgetic and sympatholytic effects without suppressing respiration. These agents are used frequently in intensive care because their sedative effect are short-lived and do not cause amnesia, sleep deprivation or cognitive disturbance. Excited delirium syndrome (eds) is a type of extreme agitation for which dexmedetomidine can be used. CONCLUSION: There may well be a place for dexmedetomidine in the treatment of extreme agitation when standard treatments have failed. Further research is needed in order to ascertain whether dexmedetomidine should play a role in such treatment.status: publishe