The experience of enchantment in human-computer interaction

Improving user experience is becoming something of a rallying call in human–computer interaction but experience is not a unitary thing. There are varieties of experiences, good and bad, and we need to characterise these varieties if we are to improve user experience. In this paper we argue that enchantment is a useful concept to facilitate closer relationships between people and technology. But enchantment is a complex concept in need of some clarification. So we explore how enchantment has been used in the discussions of technology and examine experiences of film and cell phones to see how enchantment with technology is possible. Based on these cases, we identify the sensibilities that help designers design for enchantment, including the specific sensuousness of a thing, senses of play, paradox and openness, and the potential for transformation. We use these to analyse digital jewellery in order to suggest how it can be made more enchanting. We conclude by relating enchantment to varieties of experience.</p

A dynamical trichotomy for structured populations experiencing positive density-dependence in stochastic environments

Positive density-dependence occurs when individuals experience increased survivorship, growth, or reproduction with increased population densities. Mechanisms leading to these positive relationships include mate limitation, saturating predation risk, and cooperative breeding and foraging. Individuals within these populations may differ in age, size, or geographic location and thereby structure these populations. Here, I study structured population models accounting for positive density-dependence and environmental stochasticity i.e. random fluctuations in the demographic rates of the population. Under an accessibility assumption (roughly, stochastic fluctuations can lead to populations getting small and large), these models are shown to exhibit a dynamical trichotomy: (i) for all initial conditions, the population goes asymptotically extinct with probability one, (ii) for all positive initial conditions, the population persists and asymptotically exhibits unbounded growth, and (iii) for all positive initial conditions, there is a positive probability of asymptotic extinction and a complementary positive probability of unbounded growth. The main results are illustrated with applications to spatially structured populations with an Allee effect and age-structured populations experiencing mate limitation

A Prospective Longitudinal Study of the Clinical Outcomes from Cryptococcal Meningitis following Treatment Induction with 800 mg Oral Fluconazole in Blantyre, Malawi

Introduction: Cryptococcal meningitis is the most common neurological infection in HIV infected patients in Sub Saharan Africa, where gold standard treatment with intravenous amphotericin B and 5 flucytosine is often unavailable or difficult to administer. Fluconazole monotherapy is frequently recommended in national guidelines but is a fungistatic drug compromised by uncertainty over optimal dosing and a paucity of clinical end-point outcome data. Methods: From July 2010 until March 2011, HIV infected adults with a first episode of cryptococcal meningitis were recruited at Queen Elizabeth Central Hospital, Blantyre, Malawi. Patients were treated with oral fluconazole monotherapy 800 mg daily, as per national guidelines. ART was started at 4 weeks. Outcomes and factors associated with treatment failure were assessed 4, 10 and 52 weeks after fluconazole initiation. Results: Sixty patients were recruited. 26/60 (43%) died by 4 weeks. 35/60 (58.0%) and 43/56 (77%) died or failed treatment by 10 or 52 weeks respectively. Reduced consciousness (Glasgow Coma Score ,14 of 15), moderate/severe neurological disability (modified Rankin Score .3 of 5) and confusion (Abbreviated Mental Test Score ,8 of 10) were all common at baseline and associated with death or treatment failure. ART prior to recruitment was not associated with better outcomes. Conclusions: Mortality and treatment failure from cryptococcal meningitis following initiation of treatment with 800 mg oral fluconazole is unacceptably high. To improve outcomes, there is an urgent need for better therapeutic strategies and point-of-care diagnostics, allowing earlier diagnosis before development of neurological deficit

The EAGLE simulations of galaxy formation: calibration of subgrid physics and model variations

We present results from thirteen cosmological simulations that explore the parameter space of the "Evolution and Assembly of GaLaxies and their Environments" (EAGLE) simulation project. Four of the simulations follow the evolution of a periodic cube L = 50 cMpc on a side, and each employs a different subgrid model of the energetic feedback associated with star formation. The relevant parameters were adjusted so that the simulations each reproduce the observed galaxy stellar mass function at z = 0.1. Three of the simulations fail to form disc galaxies as extended as observed, and we show analytically that this is a consequence of numerical radiative losses that reduce the efficiency of stellar feedback in high-density gas. Such losses are greatly reduced in the fourth simulation - the EAGLE reference model - by injecting more energy in higher density gas. This model produces galaxies with the observed size distribution, and also reproduces many galaxy scaling relations. In the remaining nine simulations, a single parameter or process of the reference model was varied at a time. We find that the properties of galaxies with stellar mass <~ M* (the "knee" of the galaxy stellar mass function) are largely governed by feedback associated with star formation, while those of more massive galaxies are also controlled by feedback from accretion onto their central black holes. Both processes must be efficient in order to reproduce the observed galaxy population. In general, simulations that have been calibrated to reproduce the low-redshift galaxy stellar mass function will still not form realistic galaxies, but the additional requirement that galaxy sizes be acceptable leads to agreement with a large range of observables

A review of information flow diagrammatic models for product-service systems

A product-service system (PSS) is a combination of products and services to create value for both customers and manufacturers. Modelling a PSS based on function orientation offers a useful way to distinguish system inputs and outputs with regards to how data are consumed and information is used, i.e. information flow. This article presents a review of diagrammatic information flow tools, which are designed to describe a system through its functions. The origin, concept and applications of these tools are investigated, followed by an analysis of information flow modelling with regards to key PSS properties. A case study of selection laser melting technology implemented as PSS will then be used to show the application of information flow modelling for PSS design. A discussion based on the usefulness of the tools in modelling the key elements of PSS and possible future research directions are also presented

Influence of modern coal-fired power technologies on fly ash properties and its use in concrete

The work reported in this paper investigated the properties and use of fly ash (FA) produced from technologies developed to reduce the environmental impact and improve the efficiency of the coal-fired power generation process. These include nitrogen oxides (NO x) reduction, co-combustion, supercritical steam technology and oxy-fuel combustion. The nine FA samples examined from these technologies were characterised physically, chemically and in terms of their reactivity. Tests were also carried out to determine the consistence (slump) and compressive strength of FA concretes. Comparisons were made with a selection of reference FAs, the requirements of BS EN 450-1 and reported FA studies from the 1980s and 1990s. The results indicated that, for some technologies, the FA tended to be coarser and of higher loss on ignition (co-combustion and in-combustion NO x reduction) while, for others lower carbon contents were found (supercritical steam) or there was little obvious effect. FA chemistry was slightly affected in some cases, but mainly as expected for the coal being used. There was general agreement between water requirement and activity index with FA fineness for the materials tested. For the FA concretes, similar effects were noted in terms of the dosage of superplasticising admixture needed for a target slump and compressive strength. The behaviour of the materials from the new technologies was found to be similar to that reported in earlier studies on FA and suggests suitability for their use in concrete construction. </p

Percentile reference values for anthropometric body composition indices in European children from the IDEFICS study

INTRODUCTION: To characterise the nutritional status in children with obesity or wasting conditions, European anthropometric reference values for body composition measures beyond the body mass index (BMI) are needed. Differentiated assessment of body composition in children has long been hampered by the lack of appropriate references. OBJECTIVES: The aim of our study is to provide percentiles for body composition indices in normal weight European children, based on the IDEFICS cohort (Identification and prevention of Dietary-and lifestyle-induced health Effects in Children and infantS). METHODS: Overall 18 745 2.0-10.9-year-old children from eight countries participated in the study. Children classified as overweight/obese or underweight according to IOTF (N = 5915) were excluded from the analysis. Anthropometric measurements (BMI (N = 12 830); triceps, subscapular, fat mass and fat mass index (N = 11 845-11 901); biceps, suprailiac skinfolds, sum of skinfolds calculated from skinfold thicknesses (N = 8129-8205), neck circumference (N = 12 241); waist circumference and waist-to-height ratio (N = 12 381)) were analysed stratified by sex and smoothed 1st, 3rd, 10th, 25th, 50th, 75th, 90th, 97th and 99th percentile curves were calculated using GAMLSS. RESULTS: Percentile values of the most important anthropometric measures related to the degree of adiposity are depicted for European girls and boys. Age-and sex-specific differences were investigated for all measures. As an example, the 50th and 99th percentile values of waist circumference ranged from 50.7-59.2 cm and from 51.3-58.7 cm in 4.5-to < 5.0-year-old girls and boys, respectively, to 60.6-74.5 cm in girls and to 59.9-76.7 cm in boys at the age of 10.5-10.9 years. CONCLUSION: The presented percentile curves may aid a differentiated assessment of total and abdominal adiposity in European children

The stellar halo of the Galaxy

Stellar halos may hold some of the best preserved fossils of the formation history of galaxies. They are a natural product of the merging processes that probably take place during the assembly of a galaxy, and hence may well be the most ubiquitous component of galaxies, independently of their Hubble type. This review focuses on our current understanding of the spatial structure, the kinematics and chemistry of halo stars in the Milky Way. In recent years, we have experienced a change in paradigm thanks to the discovery of large amounts of substructure, especially in the outer halo. I discuss the implications of the currently available observational constraints and fold them into several possible formation scenarios. Unraveling the formation of the Galactic halo will be possible in the near future through a combination of large wide field photometric and spectroscopic surveys, and especially in the era of Gaia.Comment: 46 pages, 16 figures. References updated and some minor changes. Full-resolution version available at http://www.astro.rug.nl/~ahelmi/stellar-halo-review.pd

The EAGLE simulation of galaxy formation: public release of halo and galaxy catalogues

We present the public data release of halo and galaxy catalogues extracted from the EAGLE suite of cosmological hydrodynamical simulations of galaxy formation. These simulations were performed with an enhanced version of the GADGET code that includes a modified hydrodynamics solver, time-step limiter and subgrid treatments of baryonic physics, such as stellar mass loss, element-by-element radiative cooling, star formation and feedback from star formation and black hole accretion. The simulation suite includes runs performed in volumes ranging from 25 to 100 comoving megaparsecs per side, with numerical resolution chosen to marginally resolve the Jeans mass of the gas at the star formation threshold. The free parameters of the subgrid models for feedback are calibrated to the redshift z=0 galaxy stellar mass function, galaxy sizes and black hole mass - stellar mass relation. The simulations have been shown to match a wide range of observations for present-day and higher-redshift galaxies. The raw particle data have been used to link galaxies across redshifts by creating merger trees. The indexing of the tree produces a simple way to connect a galaxy at one redshift to its progenitors at higher redshift and to identify its descendants at lower redshift. In this paper we present a relational database which we are making available for general use. A large number of properties of haloes and galaxies and their merger trees are stored in the database, including stellar masses, star formation rates, metallicities, photometric measurements and mock gri images. Complex queries can be created to explore the evolution of more than 10^5 galaxies, examples of which are provided in appendix. (abridged

Poor glycaemic control is associated with reduced exercise performance and oxygen economy during cardio-pulmonary exercise testing in people with type 1 diabetes

BackgroundTo explore the impact of glycaemic control (HbA1c) on functional capacity during cardio-pulmonary exercise testing in people with type 1 diabetes.MethodsSixty-four individuals with type 1 diabetes (age: 34 ± 8 years; 13 females, HbA1c: 7.8 ± 1% (62 ± 13 mmol/mol), duration of diabetes: 17 ± 9 years) performed a cardio-pulmonary cycle ergometer exercise test until volitional exhaustion. Stepwise linear regression was used to explore relationships between HbA1c and cardio-respiratory data with p ≤ 0.05. Furthermore, participants were divided into quartiles based on HbA1c levels and cardio-respiratory data were analysed by one-way ANOVA. Multiple regression analysis was performed to explore the relationships between changes in time to exhaustion and cardio-respiratory data. Data were adjusted for confounder.ResultsHbA1c was related to time to exhaustion and oxygen consumption at the power output elicited at the sub-maximal threshold of the heart rate turn point (r = 0.47, R2 = 0.22, p = 0.03). Significant differences were found at time to exhaustion between QI vs. QIV and at oxygen consumption at the power output elicited at the heart rate turn point between QI vs. QII and QI vs. QIV (p < 0.05). Changes in oxygen uptake, power output and in oxygen consumption at the power output elicited at the heart rate turn point and at maximum power output explained 55% of the variance in time to exhaustion (r = 0.74, R2 = 0.55, p < 0.01).ConclusionsPoor glycaemic control is related to less economical use of oxygen at sub-maximal work rates and an earlier time to exhaustion during cardio-pulmonary exercise testing. However, exercise training could have the same potential to counteract the influence of poor glycaemic control on functional capacity