17 research outputs found
Benchmark Parameters for CMB Polarization Experiments
The recently detected polarization of the cosmic microwave background (CMB)
holds the potential for revealing the physics of inflation and gravitationally
mapping the large-scale structure of the universe, if so called B-mode signals
below 10^{-7}, or tenths of a uK, can be reliably detected. We provide a
language for describing systematic effects which distort the observed CMB
temperature and polarization fields and so contaminate the B-modes. We identify
7 types of effects, described by 11 distortion fields, and show their
association with known instrumental systematics such as common mode and
differential gain fluctuations, line cross-coupling, pointing errors, and
differential polarized beam effects. Because of aliasing from the small-scale
structure in the CMB, even uncorrelated fluctuations in these effects can
affect the large-scale B modes relevant to gravitational waves. Many of these
problems are greatly reduced by having an instrumental beam that resolves the
primary anisotropies (FWHM << 10'). To reach the ultimate goal of an
inflationary energy scale of 3 \times 10^{15} GeV, polarization distortion
fluctuations must be controlled at the 10^{-2}-10^{-3} level and temperature
leakage to the 10^{-4}-10^{-3} level depending on effect. For example pointing
errors must be controlled to 1.5'' rms for arcminute scale beams or a percent
of the Gaussian beam width for larger beams; low spatial frequency differential
gain fluctuations or line cross-coupling must be eliminated at the level of
10^{-4} rms.Comment: 11 pages, 5 figures, submitted to PR
Electrophoretic deposition of hybrid film on aluminium 2024 using solâgel boehmite nanoparticles
Particle Lifting Processes in Dust Devils
Particle lifting in dust devils on both Earth and Mars has been studied from many different perspectives, including how dust devils could influence the dust cycles of both planets. Here we review our current understanding of particle entrainment by dust devils by examining results from field observations on Earth and Mars, laboratory experiments (at terrestrial ambient and Mars-analog conditions), and analytical modeling. By combining insights obtained from these three methodologies, we provide a detailed overview on interactions between particle lifting processes due to mechanical, thermal, electrodynamical and pressure effects, and how these processes apply to dust devils on Earth and Mars. Experiments and observations have shown dust devils to be effective lifters of dust given the proper conditions on Earth and Mars. However, dust devil studies have yet to determine the individual roles of each of the component processes acting at any given time in dust devils
Nanopowder Effect on Fe Nano/Micro-Bimodal Powder Injection Molding
The nano/micro-bimodal powder injection molding (PIM) process takes advantage of nano-PIM. Most studies of the process were performed with bimodal powder feedstocks containing only small amounts of nanoparticles because they focused on properties of the samples with the optimal contents of nanoparticles. This study presents how nanoparticles in bimodal powder affect the PIM process. Five different feedstocks were prepared with the powders containing nanoparticles from 0 to 100 pct. The result demonstrated that a decrease in solids loading was offset by nanoparticle addition due to the bimodal packing effect. The nanoparticles also increased the difficulty of the debinding process. Sintering was conducted at 1173 K (900 degrees C), at which the highest sintered density could be obtained, with various isothermal holding times. Unlike the density, the hardness did not reveal any dependence on the holding time due to grain growth. From this study, 25 pct was regarded as the optimal content of the nanoparticles in the bimodal powder for the maximum density and hardness. (C) The Minerals, Metals & Materials Society and ASM International 2018.11Nsciescopu
Interactions between microemulsion droplets decorated with hydrophobically modified polymers: A small-angle neutron scattering study
The LOFAR long baseline snapshot calibrator survey
13 pages, 9 figures. Accepted for publication in Astronomy and AstrophysicsInternational audienceAims. An efficient means of locating calibrator sources for International LOFAR is developed and used to determine the average density of usable calibrator sources on the sky for subarcsecond observations at 140 MHz. Methods. We used the multi-beaming capability of LOFAR to conduct a fast and computationally inexpensive survey with the full International LOFAR array. Sources were pre-selected on the basis of 325 MHz arcminute-scale flux density using existing catalogues. By observing 30 different sources in each of the 12 sets of pointings per hour, we were able to inspect 630 sources in two hours to determine if they possess a sufficiently bright compact component to be usable as LOFAR delay calibrators. Results. Over 40% of the observed sources are detected on multiple baselines between international stations and 86 are classified as satisfactory calibrators. We show that a flat low-frequency spectrum (from 74 to 325 MHz) is the best predictor of compactness at 140 MHz. We extrapolate from our sample to show that the density of calibrators on the sky that are sufficiently bright to calibrate dispersive and non-dispersive delays for the International LOFAR using existing methods is 1.0 per square degree. Conclusions. The observed density of satisfactory delay calibrator sources means that observations with International LOFAR should be possible at virtually any point in the sky, provided that a fast and efficient search using the methodology described here is conducted prior to the observation to identify the best calibrator