Impact of rapid manufacturing on design for manufacture for injection moulding

Rapid manufacturing (RM) employs similar technologies and processes to rapid prototyping (RP), hence resulting in a tool-less manufacturing process. This is achieved by assuming that RP machines have been converted to proper manufacturing machines. The current approaches to the design process, product development cycle and manufacturing considerations at the design stage within a concurrent engineering environment are closely examined. An attempt is then made to investigate the effect of the RM processes on the design process and product development cycle. This is further expanded to consider the impact of RM on rules and guidelines that have been established for design for manufacturing (DFM). This paper is limited to a comparison of RM with regards to injection moulding as RM is most likely to compete with this process in the first instance. This is the first research work to investigate the impact of RM on the design process

Materials analysis of stereolithography resins for use in rapid manufacturing

The use of Rapid Prototyping (RP) techniques for the production of end-use parts is increasing to a stage where Rapid Manufacturing is being undertaken. This paper documents significant initial investigations into the properties of Accura SI40 and SL7560 resins which represent two state of the art stereolithography resins that are aimed at end-use part manufacture. This information has previously been unavailable and is vital for their consideration in end-use part manufacture. The impact of various levels of post curing (ultraviolet and thermal) on the tensile, flexural and impact properties are investigated and correlated with differential scanning calorimetry (DSC) analysis. The isotropy/anisotropy nature of the two materials and also the effect of the notch creation method on the impact resistance were also studied

Stearoyl-CoA desaturase-1 impairs the reparative properties of macrophages and microglia in the brain

Failure of remyelination underlies the progressive nature of demyelinating diseases such as multiple sclerosis. Macrophages and microglia are crucially involved in the formation and repair of demyelinated lesions. Here we show that myelin uptake temporarily skewed these phagocytes toward a disease-resolving phenotype, while sustained intracellular accumulation of myelin induced a lesion-promoting phenotype. This phenotypic shift was controlled by stearoyl-CoA desaturase-1 (SCD1), an enzyme responsible for the desaturation of saturated fatty acids. Monounsaturated fatty acids generated by SCD1 reduced the surface abundance of the cholesterol efflux transporter ABCA1, which in turn promoted lipid accumulation and induced an inflammatory phagocyte phenotype. Pharmacological inhibition or phagocyte-specific deficiency of Scd1 accelerated remyelination ex vivo and in vivo. These findings identify SCD1 as a novel therapeutic target to promote remyelination

Surface-focused Seismic Holography of Sunspots: I. Observations

We present a comprehensive set of observations of the interaction of p-mode oscillations with sunspots using surface-focused seismic holography. Maps of travel-time shifts, relative to quiet-Sun travel times, are shown for incoming and outgoing p modes as well as their mean and difference. We compare results using phase-speed filters with results obtained with filters that isolate single p-mode ridges, and further divide the data into multiple temporal frequency bandpasses. The f mode is removed from the data. The variations of the resulting travel-time shifts with magnetic-field strength and with the filter parameters are explored. We find that spatial averages of these shifts within sunspot umbrae, penumbrae, and surrounding plage often show strong frequency variations at fixed phase speed. In addition, we find that positive values of the mean and difference travel-time shifts appear exclusively in waves observed with phase-speed filters that are dominated by power in the low-frequency wing of the p1 ridge. We assess the ratio of incoming to outgoing p-mode power using the ridge filters and compare surface-focused holography measurements with the results of earlier published p-mode scattering measurements using Fourier-Hankel decomposition.Comment: Solar Physics, accepte

A parametric study on the dynamic response of planar multibody systems with multiple clearance joints

A general methodology for dynamic modeling and analysis of multibody systems with multiple clearance joints is presented and discussed in this paper. The joint components that constitute a real joint are modeled as colliding bodies, being their behavior influenced by geometric and physical properties of the contacting surfaces. A continuous contact force model, based on the elastic Hertz theory together with a dissipative term, is used to evaluate the intra-joint contact forces. Furthermore, the incorporation of the friction phenomenon, based on the classical Coulomb’s friction law, is also discussed. The suitable contact-impact force models are embedded into the dynamics of multibody systems methodologies. An elementary mechanical system is used to demonstrate the accuracy and efficiency of the presented approach, and to discuss the main assumptions and procedures adopted. Different test scenarios are considered with the purpose of performing a parametric study for quantifying the influence of the clearance size, input crank speed and number of clearance joints on the dynamic response of multibody systems with multiple clearance joints. Additionally, the total computation time consumed in each simulation is evaluated in order to test the computational accuracy and efficiency of the presented approach. From the main results obtained in this study, it can be drawn that clearance size and the operating conditions play a crucial role in predicting accurately the dynamic responses of multibody systems.Fundação para a Ciência e a Tecnologia (FCT

Descriptors of Posidonia oceanica meadows: Use and application

The conservation of the coastal marine environment requires the possession of information that enables the global quality of the environment to be evaluated reliably and relatively quickly. The use of biological indicators is often an appropriate method. Seagrasses in general, and Posidonia oceanica meadows in particular, are considered to be appropriate for biomonitoring because of their wide distribution, reasonable size, sedentary habit, easy collection and abundance and sensitivity to modifications of littoral zone. Reasoned management, on the scale of the whole Mediterranean basin, requires standardized methods of study, to be applied by both researchers and administrators, enabling comparable results to be obtained. This paper synthesises the existing methods applied to monitor P. oceanica meadows, identifies the most suitable techniques and suggests future research directions. From the results of a questionnaire, distributed to all the identified laboratories working on this topic, a list of the most commonly used descriptors was drawn up, together with the related research techniques (e.g. standardization, interest and limits, valuation of the results). It seems that the techniques used to study meadows are rather similar, but rarely identical, even though the various teams often refer to previously published works. This paper shows the interest of a practical guide that describes, in a standardized way, the most useful techniques enabling P. oceanica meadows to be used as an environmental descriptor. Indeed, it constitutes the first stage in the process. (c) 2005 Elsevier Ltd. All rights reserved.Peer reviewe

Structural and morphological analysis of zinc incorporated non-stoichiometric hydroxyapatite nano powders

ABSTRACT In this study, Zn incorporated non-stoichiometric hydroxyapatite (nHAp) was synthesized via precipitation method and effect of the incorporation of Zn (fraction: 2, 4, 6 and 8 mol-%) on the microstructure of nHAp was studied by XRD, FTIR analysis and SEM-EDS techniques. The formation of nHAp was confirmed by XRD and FTIR those showed that no secondary phase was formed through the Zn incorporation. The SEM studies also revealed that particles were formed in nano-metric size (30-60 nm). It was found that crystallite and particle size of Zn incorporated nHAp gradually decreased up to 6 mol-%, and started to increase while the Zn fraction reached up to the 8 mol-% and hence the morphology of the aggregated products was also changed. It can be concluded that the incorporation of Zn cations cause to form nHAp phase. Furthermore, the nHAp microstructure has deviated from stoichiometric condition by incorporation of more Zn cations