Population transfer to high angular momentum states in infrared-assisted XUV photoionization of helium

An extreme-ultraviolet (XUV) laser pulse consisting of harmonics of a fundamental near-infrared (NIR) laser frequency is combined with the NIR pulse to systematically study two-color photoionization of helium atoms. A time-resolved photoelectron spectroscopy experiment is carried out where energy- A nd angle-resolved photoelectron distributions are obtained as a function of the NIR intensity and wavelength. Time-dependent Schrödinger equation calculations are performed for the conditions corresponding to the experiment and used to extract residual populations of Rydberg states resulting from excitation by the XUV + NIR pulse pair. The residual populations are studied as a function of the NIR intensity (3.5 × 1010-8 × 1012 W cm-2) and wavelength (760-820 nm). The evolution of the photoelectron distribution and the residual populations are interpreted using an effective restricted basis model, which includes the minimum set of states relevant to the features observed in the experiments. As a result, a comprehensive and intuitive picture of the laser-induced dynamics in helium atoms exposed to a two-color XUV-NIR light field is obtained. © 2020 The Author(s). Published by IOP Publishing Ltd

Energy Dependence of the NN t-matrix in the Optical Potential for Elastic Nucleon-Nucleus Scattering

The influence of the energy dependence of the free NN t-matrix on the optical potential of nucleon-nucleus elastic scattering is investigated within the context of a full-folding model based on the impulse approximation. The treatment of the pole structure of the NN t-matrix, which has to be taken into account when integrating to negative energies is described in detail. We calculate proton-nucleus elastic scattering observables for $^{16}$O, $^{40}$Ca, and $^{208}$Pb between 65 and 200 MeV laboratory energy and study the effect of the energy dependence of the NN t-matrix. We compare this result with experiment and with calculations where the center-of-mass energy of the NN t-matrix is fixed at half the projectile energy. It is found that around 200 MeV the fixed energy approximation is a very good representation of the full calculation, however deviations occur when going to lower energies (65 MeV).Comment: 11 pages (revtex), 6 postscript figure

Effects of different needles and substrates on CuInS2 deposited by electrostatic spray deposition

Copper indium disulphide (CuInS2) thin films were deposited using the electrostatic spray deposition method. The effects of applied voltage and solution flow rate on the aerosol cone shape, film composition, surface morphology and current conversion were investigated. The effect of aluminium substrates and transparent fluorine doped tin oxide (SnO2:F) coated glass substrates on the properties of as-deposited CuInS2 films were analysed. An oxidation process occurs during the deposition onto the metallic substrates which forms an insulating layer between the photoactive film and substrate. The effects of two different spray needles on the properties of the as-deposited films were also studied. The results reveal that the use of a stainless steel needle results in contamination of the film due to the transfer of metal impurities through the spray whilst this is not seen for the glass needle. The films were characterised using a number of different analytical techniques such as X-ray diffraction, scanning electron microscopy, Rutherford back-scattering and secondary ion mass spectroscopy and opto-electronic measurements

Early Atomic Models - From Mechanical to Quantum (1904-1913)

A complete history of early atomic models would fill volumes, but a reasonably coherent tale of the path from mechanical atoms to the quantum can be told by focusing on the relevant work of three great contributors to atomic physics, in the critically important years between 1904 and 1913: J. J. Thomson, Ernest Rutherford and Niels Bohr. We first examine the origins of Thomson's mechanical atomic models, from his ethereal vortex atoms in the early 1880's, to the myriad "corpuscular" atoms he proposed following the discovery of the electron in 1897. Beyond predictions for the periodicity of the elements, the application of Thomson's atoms to problems in scattering and absorption led to quantitative predictions that were confirmed by experiments with high-velocity electrons traversing thin sheets of metal. Still, the much more massive and energetic {\alpha}-particles being studied by Rutherford were better suited for exploring the interior of the atom, and careful measurements on the angular dependence of their scattering eventually allowed him to infer the existence of an atomic nucleus. Niels Bohr was particularly troubled by the radiative instability inherent to any mechanical atom, and succeeded in 1913 where others had failed in the prediction of emission spectra, by making two bold hypotheses that were in contradiction to the laws of classical physics, but necessary in order to account for experimental facts.Comment: 58 Pages + References, 8 Figures. Accepted for publication in the European Physical Journal H (Historical Perspectives on Contemporary Physics). V2 - minor typos corrected and a footnote added to p.2

A New AR Interaction Paradigm for Collaborative TeleAssistance system: The P.O.A

International audienceIn this paper, we propose a prototype of a collaborative teleassistance system for mechanical repairs based on Augmented Reality (AR). This technology is generally used to implement specific assistance applications for users, which consist of providing all the information, known as augmentations, required to perform a task. For teletransmission applications, operators are equipped with a wearable computer and a technical support expert can accurately visualize what the operator sees thanks to the teletransmission of the corresponding video stream. Within the framework of remote communication, our aim is to foster collaboration, especially informal collaboration, between the operator and the expert in order to make teleassistance easier and more efficient. To do this we rely on classical repair technologies and on collaborative systems to introduce a new human-machine interaction: the Picking Outlining Adding interaction (POA interaction). With this new interaction paradigm, technical information is provided by directly Picking, Outlining and Adding information to an item in an operator's video stream

THE BARILOCHE NEUTRON PHYSICS GROUP CURRENT ACTIVITIES

Our group has evolved around a small accelerator-based neutron source (ABNS), the 25 million electron Volt (MeV) linear electron accelerator at the Bariloche Atomic Centre. It is dedicated to applications of neutronic methods to tackle problems of basic sciences and to technological applications. Among these, the determination of total cross section of a material as a function of neutron energy by means of transmission experiments for thermal and sub-thermal neutrons is very sensitive to the geometric arrangement and movement of the atoms, over distances ranging from the 'first-neighbour scale' up to the microstructural level or 'grain scale'. This also allowed to test theoretical models of calculated cross sections and scattering kernels. Interest has moved from pulsed neutron diffraction towards deep inelastic neutron scattering (DINS), a powerful tool for the determination of atomic momentum distribution in condensed matter and for non-destructive mass spectroscopy. In recent years non-intrusive techniques aimed at the scanning of large cargo containers have started to be developed with this ABNS, testing the capacity and limitations to detect special nuclear material and dangerous substances in thick cargo arrangements. More recently, the use of the ever-present “bremsstrahlung” radiation has been recognized as a useful complement to instrumental neutron activation, as it permits to detect other nuclear species through high-energy photon activation. The facility is also used for graduate and undergraduate students experimental work within the frame of Instituto Balseiro Physics and Nuclear Engineering courses of study, and also MSc and PhD theses work

THE BARILOCHE NEUTRON PHYSICS GROUP CURRENT ACTIVITIES

Our group has evolved around a small accelerator-based neutron source (ABNS), the 25 million electron Volt (MeV) linear electron accelerator at the Bariloche Atomic Centre. It is dedicated to applications of neutronic methods to tackle problems of basic sciences and to technological applications. Among these, the determination of total cross section of a material as a function of neutron energy by means of transmission experiments for thermal and sub-thermal neutrons is very sensitive to the geometric arrangement and movement of the atoms, over distances ranging from the 'first-neighbour scale' up to the microstructural level or 'grain scale'. This also allowed to test theoretical models of calculated cross sections and scattering kernels. Interest has moved from pulsed neutron diffraction towards deep inelastic neutron scattering (DINS), a powerful tool for the determination of atomic momentum distribution in condensed matter and for non-destructive mass spectroscopy. In recent years non-intrusive techniques aimed at the scanning of large cargo containers have started to be developed with this ABNS, testing the capacity and limitations to detect special nuclear material and dangerous substances in thick cargo arrangements. More recently, the use of the ever-present “bremsstrahlung” radiation has been recognized as a useful complement to instrumental neutron activation, as it permits to detect other nuclear species through high-energy photon activation. The facility is also used for graduate and undergraduate students experimental work within the frame of Instituto Balseiro Physics and Nuclear Engineering courses of study, and also MSc and PhD theses work

Lifespan theorem for constrained surface diffusion flows

We consider closed immersed hypersurfaces in $\R^{3}$ and $\R^4$ evolving by a class of constrained surface diffusion flows. Our result, similar to earlier results for the Willmore flow, gives both a positive lower bound on the time for which a smooth solution exists, and a small upper bound on a power of the total curvature during this time. By phrasing the theorem in terms of the concentration of curvature in the initial surface, our result holds for very general initial data and has applications to further development in asymptotic analysis for these flows.Comment: 29 pages. arXiv admin note: substantial text overlap with arXiv:1201.657

A stochastic model for heart rate fluctuations

Normal human heart rate shows complex fluctuations in time, which is natural, since heart rate is controlled by a large number of different feedback control loops. These unpredictable fluctuations have been shown to display fractal dynamics, long-term correlations, and 1/f noise. These characterizations are statistical and they have been widely studied and used, but much less is known about the detailed time evolution (dynamics) of the heart rate control mechanism. Here we show that a simple one-dimensional Langevin-type stochastic difference equation can accurately model the heart rate fluctuations in a time scale from minutes to hours. The model consists of a deterministic nonlinear part and a stochastic part typical to Gaussian noise, and both parts can be directly determined from the measured heart rate data. Studies of 27 healthy subjects reveal that in most cases the deterministic part has a form typically seen in bistable systems: there are two stable fixed points and one unstable one.Comment: 8 pages in PDF, Revtex style. Added more dat