2,369 research outputs found
Magnetic tomography for lead acid batteries
© 2017 The AuthorsThis paper explores the inverse problem approach for finding the current distribution within an electrochemical cell from magnetic field measurements. Current distribution is shown to be a useful measurement for diagnosis of cells and development of cell design. Existing current distribution measurement methods are discussed to provide context and motivation for the work. Magnetic field measurements can be obtained non-invasively and contain information about the current distribution, which is extracted using an appropriate solver. Experimental results are presented which test the effectiveness of a particular inverse problem solver, using both simulated and real magnetic field measurements. The solver presented is based upon one found in literature, but with novel problem-specific modifications. Errors in conductance values in the forward model definition are simulated in order to quantify their effect on solution quality. A modification to the solver is proposed to improve robustness against these model errors. This results in improved solution quality when using real measured data from a resistor-wire model of a cell, and simulated data from a model which more accurately represents the conductance of the cell plate grid and active mass
Investigation on synchronous reluctance machines with different rotor topologies and winding configurations
This paper investigates the influence of rotor topologies and winding configurations on the electromagnetic performance of 3-phase synchronous reluctance machines with different slot/pole number combinations, e.g. 12-slot/4-pole and 12-slot/8-pole. Transversally laminated synchronous reluctance rotors with both round flux barrier and angled flux barrier have been considered, as well as the doubly-salient rotor as that used in switched reluctance machines. Both concentrated and distributed winding configurations are accounted for, i.e., single layer and double layer conventional and mutually coupled windings, as well as fully-pitched winding. The machine performance in terms of d- and q-axis inductances, on-load torque, copper loss, and iron loss have been investigated using 2-D finite-element analysis. With appropriate rotor topology, 12-slot/4-pole and 12-slot/8-pole machines with fully-pitched and double layer mutually coupled windings can achieve similar torque capacity, which are higher than the machines with other winding configurations. In addition, the synchronous reluctance machine with round flux barrier can have lower iron loss than doubly salient reluctance machine under different working conditions. The prototypes of 12-slot/8-pole single layer and double layer, doubly salient synchronous reluctance machines have been built to validate the predictions in terms of inductances and torques
A comparison of broad-spectrum and narrow-spectrum dry cow therapy used alone and in combination with a teat sealant
The dry period is a critical time in the lactation cycle, offering the optimum time for cure of existing intramammary infection (IMI), while also encompassing the periods of highest susceptibility to new intramammary infection. Until recent years, intramammary infection in the dry period has been controlled with the use of antibiotic dry cow therapy. The aim of this study was to investigate 3 different dry cow therapy regimens, in low-somatic cell count (SCC; bulk milk SCC < 250,000 cells/mL) herds in southwest England. A total of 489 cows was recruited to the study and randomly allocated to receive either the broad-spectrum antibiotic cefquinome, a combination treatment comprising the narrow-spectrum antibiotic cloxacillin and an internal teat sealant, or the narrow-spectrum antibiotic cloxacillin alone. All quarters were sampled for bacteriology at drying off and again in the week immediately postcalving; 2 quarters were also sampled 2 wk before the estimated calving date to allow an assessment of infection dynamics during the dry period. Quarters were subsequently monitored for clinical mastitis for the first 100 d of lactation. Conventional multilevel (random effects) models were constructed to assess the efficacy of products in preventing IMI. Survival analysis was used to examine factors that influenced the risk of clinical mastitis using conventional Cox proportional hazards models. No differences were identified between the treatment groups in terms of cure of IMI caused by the major pathogens. Quarters in both the combination and cefquinome-treated groups were more likely to be free of a major pathogen or enterobacterial pathogen postcalving. With respect to clinical mastitis, the cefquinome-treated group was less likely to develop clinical mastitis than was the cloxacillin treated group
The use of a cephalonium containing dry cow therapy and an internal teat sealant, both alone and in combination
AbstractThe dry period is a critical time in the lactation cycle, being the optimum time to cure existing intramammary infection (IMI) as well as encompassing the periods of highest susceptibility to new infection. Currently, IMI in the dry period is controlled with antibiotic dry cow therapy. The aim of this randomized control trial was to investigate different dry cow therapy regimens by stratifying cows by likely infection status at drying off in herds with low somatic cell count (SCC; bulk milk SCC <250,000 cells/mL) in southwest England. All quarters in 890 cows were recruited. The recruited cows were categorized as either infected or uninfected on the basis of SCC and clinical mastitis history. Ipsilateral quarters within each cow were randomly allocated to receive 1 of 4 different treatment regimens according to their infection category. Quarters in high-SCC infected cows were allocated to receive antibiotic dry cow therapy either alone or in combination with an internal teat sealant; quarters in low-SCC uninfected cows were allocated to receive teat sealant either alone or in combination with antibiotic dry cow therapy. All quarters were sampled for bacteriology at drying off and again within 10 d post-calving. Quarters were subsequently monitored for clinical mastitis for the first 100 d of lactation. The mass of residual sealant was assessed immediately post-calving to allow assessment of the association of sealant retention with treatment efficacy. Models were constructed to assess the efficacy of the different regimens in preventing IMI. Apparent cure rates of existing IMI with major pathogens were consistently >90% in quarters receiving antibiotic. Combination treatment of high-SCC infected cows resulted in an increased likelihood of being pathogen free post-calving (odds ratio=1.40; 95% credibility interval=1.03–1.90). The benefits of combination treatment of low-SCC uninfected cows were less clear. With respect to clinical mastitis, combination treatment of high-SCC infected cows resulted in a decreased likelihood of developing clinical mastitis in the first 100 d of the subsequent lactation (odds ratio=0.68; 95% credibility interval=0.48–0.98). The retention of the internal sealant was adversely affected by its use in combination with antibiotic dry cow therapy
A Field Range Bound for General Single-Field Inflation
We explore the consequences of a detection of primordial tensor fluctuations
for general single-field models of inflation. Using the effective theory of
inflation, we propose a generalization of the Lyth bound. Our bound applies to
all single-field models with two-derivative kinetic terms for the scalar
fluctuations and is always stronger than the corresponding bound for slow-roll
models. This shows that non-trivial dynamics can't evade the Lyth bound. We
also present a weaker, but completely universal bound that holds whenever the
Null Energy Condition (NEC) is satisfied at horizon crossing.Comment: 16 page
Tooling materials compatible with carbon fibre composites in a microwave environment
Although metals are the most commonly used tooling materials to cure composites, they do not provide optimal results in a microwave environment. Following a selection process based on the properties of the materials, an alternative tooling material in carbon fibre reinforced plastic (CFRP) was successfully utilised to cure CFRP panels in laboratory and industrial microwaves. The conductive carbon fibres in the tool facilitated the fast heat transfer across the part. Other tooling materials including a glass fibre cyanate ester prepreg and tooling board were trialled, although the latter exhibited damage during cure. These advantages demonstrate that the CFRP tool is a compatible material that can be used when microwave curing composites
Avalanche Noise in Al0.52In0.48P Diodes
Multiplication and avalanche excess noise measurements have been undertaken on a series of AlInP homojunction p-i-n and n-i-p diodes with i region widths ranging from 0.04 to 0.89 ÎĽm, using 442 and 460 nm wavelength light. Low dark currents of 1000 kV/cm. For a given multiplication factor, the excess noise decreased as the avalanche width decreased due to the dead-space effect. Using 460 nm wavelength light, measurements showed that a separate absorption multiplication avalanche photodiode with a nominal multiplication region width of 0.2 ÎĽm had an effective k (hole to electron ionization coefficient ratio) of ~0.3
An investigation of the efficacy of a polyvalent mastitis vaccine using different vaccination regimens under field conditions in the United Kingdom
Vaccination can play a useful role in mastitis control programs, although there is a relative dearth of large, well-controlled field efficacy studies. This paper presents the findings on the use of a commercially available vaccine (Startvac, Hipra UK Ltd., Nottingham, UK) on commercial units under UK field conditions. In total, 3,130 cows were recruited from 7 farms and were randomly allocated, within farm, to 1 of 3 groups. The first group received the vaccine following the label regimen, the second group was vaccinated every 90 d following an initial vaccination course, and the third group was left unvaccinated to act as controls. Vaccine efficacy was assessed in the first 120 d of lactation. Data were available for analysis from 1,696 lactations in 1,549 cows. In total, 779 cases of clinical mastitis occurred in the 3 study groups, and we detected no significant difference in the incidence or prevalence of clinical or subclinical mastitis between any of the 3 groups. Mastitis vaccination following the label regimen was associated with a significant reduction in the severity of clinical cases. Cows in this group were at significantly decreased odds of developing clinical mastitis presenting with more than just milk changes [odds ratio: 0.58; 95% confidence interval (CI): 0.35–0.98]. Similarly, each additional vaccination resulted in a cow being at decreased odds of developing clinical mastitis presenting with more than just milk changes (odds ratio: 0.87; 95% CI: 0.77–0.98). Although no cows were culled because of severe mastitis in either of the vaccinated groups, we detected no significant difference in the mastitis-related culling rate between groups. Analysis of milk production data demonstrated that, on average, cows on the label regimen produced a higher volume of milk (231 L; 95% CI: 104.1–357.4) and more milk solids (12.36 kg; 95% CI: 3.12–21.60) than unvaccinated cows in the first 120 d of lactation. Conservative analysis suggested that a return on investment of 2.57:1 could be expected under UK conditions based on increased milk yield alone
Critical exponents in Ising spin glasses
We determine accurate values of ordering temperatures and critical exponents
for Ising Spin Glass transitions in dimension 4, using a combination of finite
size scaling and non-equilibrium scaling techniques. We find that the exponents
and vary with the form of the interaction distribution, indicating
non-universality at Ising spin glass transitions. These results confirm
conclusions drawn from numerical data for dimension 3.Comment: 6 pages, RevTeX (or Latex, etc), 10 figures, Submitted to PR
The use of an e-learning constructivist solution in workplace learning
We wished to investigate whether an e-learning approach which uses constructivist principles can be successfully applied to train employees in a highly specialised skill thought to require expert individuals and extensive prolonged training. The approach involved the development of an e-learning package which included simulations and interactivity, then experimental testing in a case study workplace environment with the collection of both quantitative and qualitative data to assess the effectiveness of the package. Our study shows that this e-learning strategy improved the skills of the inexperienced
operator significantly. We therefore propose that such programmes could be used as a work based training aid and used as a model system for the training of employees in complex skilled tasks in the workplace. This research demonstrates that the e-learning can be applied outside the traditional learning environment to train unskilled employees to undertake complex practical tasks which traditionally would involve prohibitively expensive instruction. This work also illustrates that simulations and interactivity are powerful tools in the design of successful e-learning packages in preparing learners for real world practical situations. Finally this study shows that workplace learners can be better served by elearning environments rather than conventional training as they allow asynchronous learning and private study which are valued by employees who have other demands on their time and are more comfortable receiving tuition privately Relevance to industry: E-learning using constructivist principles, and incorporating simulations and interactivity can be used successfully in the training of highly specialised and skilled tasks required in the
modern workplace
- …