Managing a forgotten greenhouse gas under existing U.S. law: An interdisciplinary analysis

The United States’ legal strategy for addressing climate change in recent years has relied on authority from existing legislation. This has led to measures on a number of different greenhouse gases, notably carbon dioxide, methane and hydrofluorocarbons. However, one greenhouse gas has been largely forgotten: nitrous oxide. Nitrous oxide is the third most abundantly emitted greenhouse gas in the U.S. and worldwide, as well as the largest remaining threat to the stratospheric ozone layer. In addition, the nitrogen atoms in nitrous oxide are part of the highly fluid nitrogen cycle where nitrogen atoms transform readily among different chemical forms, each with a unique environmental and human health impact – a process known as the nitrogen cascade. While the science of the nitrogen cascade has been explored for over a decade, there has been little work on the legal implications of this phenomenon. And yet the nitrogen cascade expands the legal options available for controlling nitrous oxide. This paper studies these options in a U.S. context and explores the environmental and economic impacts of enacting them. We determine that the Clean Air Act, and in particular its broad authority for controlling ozone depleting substances, is the most promising legal pathway for regulating nitrous oxide across all major sources. Invoking such authority could generate significant climate and stratospheric ozone benefits over 2015–2030, equivalent to taking 12 million cars permanently off the road, and 100 million chlorofluorocarbon-laden refrigerators out of service. The economic benefits could sum to over $700 billion over 2015–2030, with every$1.00 spent on abating emissions leading to $4.10 in societal benefits. The bulk of these benefits would come from reductions in other forms of nitrogen pollution such as ammonia and nitrate, highlighting the important and multiple co-benefits that could be achieved by abating nitrous oxide emissions. With the Paris Climate Agreement calling for limiting global temperature increases to “well below” two degrees Celsius, all mitigation opportunities across all sectors need to be considered. This paper suggests that nitrous oxide warrants more attention from policy-makers in the U.S. and around the world

Nonexistence of marginally trapped surfaces and geons in 2+1 gravity

We use existence results for Jang's equation and marginally outer trapped surfaces (MOTSs) in 2+1 gravity to obtain nonexistence of geons in 2+1 gravity. In particular, our results show that any 2+1 initial data set, which obeys the dominant energy condition with cosmological constant \Lambda \geq 0 and which satisfies a mild asymptotic condition, must have trivial topology. Moreover, any data set obeying these conditions cannot contain a MOTS. The asymptotic condition involves a cutoff at a finite boundary at which a null mean convexity condition is assumed to hold; this null mean convexity condition is satisfied by all the standard asymptotic boundary conditions. The results presented here strengthen various aspects of previous related results in the literature. These results not only have implications for classical 2+1 gravity but also apply to quantum 2+1 gravity when formulated using Witten's solution space quantization.Comment: v3: Elements from the original two proofs of the main result have been combined to give a single proof, thereby circumventing an issue with the second proof associated with potential blow-ups of solutions to Jang's equation. To appear in Commun. Math. Phy

Classical Yang-Mills Black hole hair in anti-de Sitter space

The properties of hairy black holes in Einstein–Yang–Mills (EYM) theory are reviewed, focusing on spherically symmetric solutions. In particular, in asymptotically anti-de Sitter space (adS) stable black hole hair is known to exist for frak su(2) EYM. We review recent work in which it is shown that stable hair also exists in frak su(N) EYM for arbitrary N, so that there is no upper limit on how much stable hair a black hole in adS can possess

Multiwavelength studies of MHD waves in the solar chromosphere: An overview of recent results

The chromosphere is a thin layer of the solar atmosphere that bridges the relatively cool photosphere and the intensely heated transition region and corona. Compressible and incompressible waves propagating through the chromosphere can supply significant amounts of energy to the interface region and corona. In recent years an abundance of high-resolution observations from state-of-the-art facilities have provided new and exciting ways of disentangling the characteristics of oscillatory phenomena propagating through the dynamic chromosphere. Coupled with rapid advancements in magnetohydrodynamic wave theory, we are now in an ideal position to thoroughly investigate the role waves play in supplying energy to sustain chromospheric and coronal heating. Here, we review the recent progress made in characterising, categorising and interpreting oscillations manifesting in the solar chromosphere, with an impetus placed on their intrinsic energetics.Comment: 48 pages, 25 figures, accepted into Space Science Review

Intra‐clinothem variability in sedimentary texture and process regime recorded down slope profiles

Shelf‐margin clinothem successions can archive process interactions at the shelf to slope transition, and their architecture provides constraints on the interplay of factors that control basin‐margin evolution. However, detailed textural analysis and facies distributions from shelf to slope transitions remain poorly documented. This study uses quantitative grain‐size and sorting data from coeval shelf and slope deposits of a single clinothem that crops out along a 5 km long, dip‐parallel transect of the Eocene Sobrarbe Deltaic Complex (Ainsa Basin, south‐central Pyrenees, Spain). Systematic sampling of sandstone beds tied to measured sections has captured vertical and basinward changes in sedimentary texture and facies distributions at an intra‐clinothem scale. Two types of hyperpycnal flow‐related slope deposits, both rich in mica and terrestrial organic matter, are differentiated according to grain size, sorting and bed geometry: (i) sustained hyperpycnal flow deposits, which are physically linked to coarse channelized sediments in the shelf setting and which deposit sand down the complete slope profile; (ii) episodic hyperpycnal flow deposits, which are disconnected from, and incise into, shelf sands and which are associated with sediment bypass of the proximal slope and coarse‐grained sand deposition on the medial and distal slope. Both types of hyperpycnites are interbedded with relatively homogenous, organic‐free and mica‐free, well‐sorted, very fine‐grained sandstones, which are interpreted to be remobilized from wave‐dominated shelf environments; these wave‐dominated deposits are found only on the proximal and medial slope. Coarse‐grained sediment bypass into the deeper‐water slope settings is therefore dominated by episodic hyperpycnal flows, whilst sustained hyperpycnal flows and turbidity currents remobilizing wave‐dominated shelf deposits are responsible for the full range of grain sizes in the proximal and medial slope, thus facilitating clinoform progradation. This novel dataset highlights previously undocumented intra‐clinothem variability related to updip changes in the shelf process‐regime, which is therefore a key factor controlling downdip architecture and resulting sedimentary texture

Embedded pitch adapters: a high-yield interconnection solution for strip sensors

A proposal to fabricate large area strip sensors with integrated, or embedded, pitch adapters is presented for the End-cap part of the Inner Tracker in the ATLAS experiment. To implement the embedded pitch adapters, a second metal layer is used in the sensor fabrication, for signal routing to the ASICs. Sensors with different embedded pitch adapters have been fabricated in order to optimize the design and technology. Inter-strip capacitance, noise, pick-up, cross-talk, signal efficiency, and fabrication yield have been taken into account in their design and fabrication. Inter-strip capacitance tests taking into account all channel neighbors reveal the important differences between the various designs considered. These tests have been correlated with noise figures obtained in full assembled modules, showing that the tests performed on the bare sensors are a valid tool to estimate the final noise in the full module. The full modules have been subjected to test beam experiments in order to evaluate the incidence of cross-talk, pick-up, and signal loss. The detailed analysis shows no indication of cross-talk or pick-up as no additional hits can be observed in any channel not being hit by the beam above 170 mV threshold, and the signal in those channels is always below 1% of the signal recorded in the channel being hit, above 100 mV threshold. First results on irradiated mini-sensors with embedded pitch adapters do not show any change in the interstrip capacitance measurements with only the first neighbors connected

Study of surface properties of ATLAS12 strip sensors and their radiation resistance

A radiation hard nþ-in-p micro-strip sensor for the use in the Upgrade of the strip tracker of the ATLAS experiment at the High Luminosity Large Hadron Collider (HL-LHC) has been developed by the “ATLAS ITk Strip Sensor collaboration” and produced by Hamamatsu Photonics. Surface properties of different types of end-cap and barrel miniature sensors of the latest sensor design ATLAS12 have been studied before and after irradiation. The tested barrel sensors vary in “punchthrough protection” (PTP) structure, and the end-cap sensors, whose stereo-strips differ in fan geometry, in strip pitch and in edge strip ganging options. Sensors have been irradiated with proton fluences of up to 1 1016 neq/cm2 , by reactor neutron fluence of 1 1015 neq/cm2 and by gamma rays from 60Co up to dose of 1 MGy. The main goal of the present study is to characterize the leakage current for microdischarge breakdown voltage estimation, the inter-strip resistance and capacitance, the bias resistance and the effectiveness of PTP structures as a function of bias voltage and fluence. It has been verified that the ATLAS12 sensors have high breakdown voltage well above the operational voltage which implies that different geometries of sensors do not influence their stability. The inter-strip isolation is a strong function of irradiation fluence, however the sensor performance is acceptable in the expected range for HL-LHC. New gated PTP structure exhibits low PTP onset voltage and sharp cut-off of effective resistance even at the highest tested radiation fluence. The inter-strip capacitance complies with the technical specification required before irradiation and no radiation-induced degradation was observed. A summary of ATLAS12 sensors tests is presented including a comparison of results from different irradiation sites. The measured characteristics are compared with the previous prototype of the sensor design, ATLAS07

Charge collection and field profile studies of heavily irradiated strip sensors for the ATLAS inner tracker upgrade

The ATLAS group has evaluated the charge collection in silicon microstrip sensors irradiated up to a fluence of 1×1016 neq/cm2, exceeding the maximum of 1.6×1015 neq/cm2 expected for the strip tracker during the high luminosity LHC (HL-LHC) period including a safety factor of 2. The ATLAS12, n+-on-p type sensor, which is fabricated by Hamamatsu Photonics (HPK) on float zone (FZ) substrates, is the latest barrel sensor prototype. The charge collection from the irradiated 1×1 cm2 barrel test sensors has been evaluated systematically using penetrating β-rays and an Alibava readout system. The data obtained at different measurement sites are compared with each other and with the results obtained from the previous ATLAS07 design. The results are very consistent, in particular, when the deposit charge is normalized by the sensor's active thickness derived from the edge transient current technique (edge-TCT) measurements. The measurements obtained using β-rays are verified to be consistent with the measurements using an electron beam. The edge-TCT is also effective for evaluating the field profiles across the depth. The differences between the irradiated ATLAS07 and ATLAS12 samples have been examined along with the differences among the samples irradiated with different radiation sources: neutrons, protons, and pions. The studies of the bulk properties of the devices show that the devices can yield a sufficiently large signal for the expected fluence range in the HL-LHC, thereby acting as precision tracking sensors